Dynamic compressive mechanical properties and a new constitutive model of 2D-C/SiC composites

被引:43
|
作者
Liu Mingshuang [1 ]
Li Yulong [1 ]
Xu Fei [1 ]
Xu Zejian [1 ]
Cheng Laifei [2 ]
机构
[1] NW Polytech Univ, Sch Aeronaut, Xian 710072, Peoples R China
[2] NW Polytech Univ, Sch Mat Sci & Engn, Xian 710072, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 489卷 / 1-2期
基金
中国国家自然科学基金;
关键词
ceramic matrix composites (CMCs); Weibull distribution; dynamical constitutive model; damage angle;
D O I
10.1016/j.msea.2008.01.014
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The layer-directional compressive properties of 2D-C/SiC composites were investigated at strain rates ranging from 10(-4) to 2.8 x 10(3) s(-1). The quasi-static experiments were performed using the electronic universal testing machine, and the dynamic experiments were conducted by the split Hopkinson pressure bar system. The results show that the dynamic compressive stress-strain curves are non-linear. The failure strength and the elasticity modulus vary linearly to the logarithm of the strain rate, and the failure strain reduces with an increasing strain rate. Scatter of dynamic compressive failure strength obeys Weibull distribution and the Weibull parameter m is 5.27. The damage angle of dynamic compression is larger than that of static loading. Observed on SEM, the ruptured surface is smooth at high loading rate and more cracked fibers appear in the specimens than at lower strain rate. Based on the experimental results, a new constitutive model is proposed in this paper. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:120 / 126
页数:7
相关论文
共 50 条
  • [31] A damage constitutive model for the nonlinear mechanical behavior of C/SiC composites during mechanical cyclical loading/unloading
    Niu, Z. B.
    Chen, S. A.
    Li, Y.
    Xiao, P.
    Yang, Z. M.
    Tong, Y. G.
    Almeida, R. S. M.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2022, 161
  • [32] Experimental investigation on dynamic compressive mechanical properties of weathered granite and statistical damage constitutive model
    Qu, Xiao
    Wang, Huanling
    Xie, Wei-chau
    Ma, Hangsheng
    BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2023, 82 (08)
  • [33] Tensile creep damage of 2D-C/SiC composites evaluated using the fractal dimension and elastic modulus
    Wu Xiao-jun
    Qiao Sheng-ru
    Hou Jun-tao
    Han Dong
    Li Mei
    NEW CARBON MATERIALS, 2006, 21 (04) : 321 - 325
  • [34] Tensile creep damage of 2D-C/SiC composites evaluated using the fractal dimension and elastic modulus
    Wu, Xiao-Jun
    Qiao, Sheng-Ru
    Hou, Jun-Tao
    Han, Dong
    Li, Mei
    Xinxing Tan Cailiao/New Carbon Materials, 2006, 21 (04): : 321 - 325
  • [35] Dynamic compressive mechanical properties and constitutive models of flexible polyurethane foam
    Su X.
    Zhou L.
    Jing L.
    Deng G.
    Zhao L.
    Baozha Yu Chongji/Explosion and Shock Waves, 2022, 42 (09):
  • [36] Mechanical properties of 3D fiber reinforced C/SiC composites
    Xu, YD
    Cheng, LF
    Zhang, LT
    Yin, HF
    Yin, XW
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 300 (1-2): : 196 - 202
  • [37] Dynamic compressive properties and constitutive model of reactive powder concrete
    Xie L.
    Li Q.-H.
    Xu S.-L.
    Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2021, 55 (05): : 999 - 1009
  • [38] The effect of carbon fabric treatment on delamination of 2D-C/C composites
    Li, Chongjun
    Crosky, Alan
    COMPOSITES SCIENCE AND TECHNOLOGY, 2006, 66 (15) : 2633 - 2638
  • [39] Internal friction of a 2D-C/SiC composite from 25°C to 400°C
    Hou, Juntao
    Qiao, Shengru
    Lu, Guofeng
    Zhang, Chengyu
    Zhang, Yuebing
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 1509 - +
  • [40] 2D-C/SiC高温弹性模量的预测
    张歌
    张程煜
    乔生儒
    韩栋
    李玫
    机械强度, 2013, (01) : 94 - 99