Influence of Titanium on the Microstructure and Mechanical Properties of Foundry Zinc Alloy

被引：4
|
作者：
Dudek, Piotr [1 ]
Piwowonska, Justyna [1 ]
机构：
[1] Lukasiewicz Res Network, Krakow Inst Technol, 73 Zakopianska St, PL-30418 Krakow, Poland
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2022年 / 31卷 / 11期
关键词：
mechanical properties; modification; structure; zinc alloys; SLIDING WEAR PROPERTIES; TENSILE PROPERTIES; GRAIN-REFINEMENT; ALUMINUM ALLOYS; ZN; HARDNESS;
D O I：
10.1007/s11665-022-06940-z
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The article presents studies of the influence of titanium on the microstructure and mechanical properties of the zinc casting alloy ZL2. The positive effect of its addition on the strength of die castings made of this alloy was found. Castings with the addition of titanium had a fine structure and higher tensile strength (approx. 255 MPa for an alloy with Ti addition) compared to the base material (approx. 200 MPa). The addition of the modifier also increased the hardness of the obtained castings from 100 HBW (ZL2) to 130 HBW (alloy with the addition of Ti).
引用
收藏
页码：9029 / 9038
页数：10
相关论文
共 50 条
  • [41] Mechanical properties and microstructure of an α + β titanium alloy with high strength and fracture toughness
    Yang Yu
    Songxiao Hui
    Wenjun Ye
    Baiqing Xiong
    Rare Metals, 2009, 28 : 346 - 349
  • [42] Research on microstructure and mechanical properties of β21S titanium alloy
    Inst of Aeronautical Materials, Beijing, China
    Cailiao Gongcheng, 1 (11-14):
  • [43] Microstructure evolution and mechanical properties of heat treated LCB titanium alloy
    Ibrahim, Khaled M.
    Mhaede, Mansour
    Wagner, Lothar
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (11) : 2609 - 2615
  • [44] Mechanical properties and microstructure of an α+β titanium alloy with high strength and fracture toughness
    YU Yang
    RareMetals, 2009, 28 (04) : 346 - 349
  • [45] Mechanical properties and microstructure of an α + β titanium alloy with high strength and fracture toughness
    State Key Laboratory for Fabrication and Processing of Nonferrous Metals, General Research Institute for Nonferrous Metals, Beijing 100088, China
    Rare Met, 4 (346-349):
  • [46] Microstructure and mechanical properties of CT1400 cryogenic titanium alloy
    Zheng, Zhuangzhuang
    Lu, Zichuan
    Yang, Jianhui
    Chang, Ruohan
    Tu, Gang
    Yao, Caogen
    Lyu, Hongjun
    Kang, Li
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2024, 52 (11): : 125 - 132
  • [47] Influence of scandium on the microstructure and mechanical properties of A319 alloy
    Emadi, Daryoush
    Rao, A. K. Prasada
    Mahfoud, Musbah
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (23): : 6123 - 6132
  • [48] Influence of Cold Rolling on Microstructure and Mechanical Properties of TiNi Alloy
    Zhang Bing
    Wang Jianping
    Zhang Zhijuan
    Zhao Tianli
    Yang Xiaokang
    Wang Hai
    Qi Kai
    Feng Hui
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (10) : 3802 - 3807
  • [49] Influence of Cold Rolling on Microstructure and Mechanical Properties of TiNi Alloy
    Zhang, Bing
    Wang, Jianping
    Zhang, Zhijuan
    Zhao, Tianli
    Yang, Xiaokang
    Wang, Hai
    Qi, Kai
    Feng, Hui
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2022, 51 (10): : 3802 - 3807
  • [50] The influence of the ECAP temperature on microstructure and mechanical properties of a magnesium alloy
    Kulyasova, OB
    Islamgaliev, RK
    Krasiulnikov, NA
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 2006, 503-504 : 609 - 614
12345