Experimental investigation of Minimum Quantity Lubrication (MQL) of coconut oil based Metal Working Fluid

被引：23
|
作者：
Fernando, W. L. R. [1 ]
Sarmilan, N. [1 ]
Wickramasinghe, K. C. [1 ]
Herath, H. M. C. M. [2 ]
Perera, G. I. P. [1 ]
机构：
[1] Univ Ruhuna, Fac Engn, Dept Mech & Mfg Engn, Matara, Sri Lanka
[2] Univ Southern Queensland, Ctr Future Mat, Toowoomba, Qld, Australia
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 23卷
关键词：
Minimum Quantity Lubrication; Surface roughness; Flank wear; Coconut oil; Temperature;
D O I：
10.1016/j.matpr.2019.06.079
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Minimum Quantity Lubrication (MQL) is a technique of applying fine mists of Metal Working Fluid (MWF), instead a flood of it. This paper describes performance evaluation of novel coconut oil based MWF, during turning of AISI 304 Austenitic Stainless Steel and Mild Steel. The novel coconut oil based MWF has shown better heat absorption while machining AISI 304. Optimum parameter settings for turning of AISI 304 with coconut oil based MWF under MQL condition has obtained. Further flank wear was investigated by observing SEM images. Turning of AISI 304, with presence of new MWF, has shown an improvement in tool flank wear compared with a standard mineral oil based MWF. (C) 2019 Elsevier Ltd.
引用
收藏
页码：23 / 26
页数：4
相关论文
共 50 条
  • [31] Measurement of droplet size and distribution for Minimum Quantity Lubrication (MQL)
    Park, Kyung-Hee
    Olortegui-Yume, Jorge A.
    Joshi, Shantanu
    Kwon, Patrick
    Yoon, Moon-Chul
    Lee, Gyu-Bong
    Park, Sung-Bum
    2008 INTERNATIONAL CONFERENCE ON SMART MANUFACTURING APPLICATION, 2008, : 447 - 454
  • [32] A technology enabler for green machining: minimum quantity lubrication (MQL)
    Boubekri, Nourredine
    Shaikh, Vasim
    Foster, Phillip R.
    JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT, 2010, 21 (05) : 556 - 566
  • [33] Progress and trend of minimum quantity lubrication (MQL): A comprehensive review
    He, Tao
    Liu, Niancong
    Xia, Huazheng
    Wu, Long
    Zhang, Yu
    Li, Daigang
    Chen, Yun
    JOURNAL OF CLEANER PRODUCTION, 2023, 386
  • [34] Effect of Flow Field on Cutting Fluid Penetration during Minimum Quantity Lubrication (MQL) Machining
    Zheng, W. J.
    Pei, H. J.
    Wang, G. C.
    Shen, C. G.
    HIGH SPEED MACHINING, 2011, 188 : 61 - 66
  • [35] PREDICTIVE FORCE MODELING IN MQL (MINIMUM QUANTITY LUBRICATION) GRINDING
    Shao, Yamin
    Liang, Steven Y.
    PROCEEDINGS OF THE ASME 9TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2014, VOL 2, 2014,
  • [36] An investigation on the top burr formation during Minimum Quantity Lubrication (MQL) assisted micromilling of copper
    Saha, Suman
    Kumar, A. Sravan
    Deb, Sankha
    Byopadhyay, Partha Pratim
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 1809 - 1814
  • [37] Investigation on white coconut oil to use as a metal working fluid during turning
    Perera, G. Indika P.
    Herath, H. M. C. Madubhashitha
    Perera, I. M. Sanka J.
    Medagoda, M. G. H. M. Muditha P.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (01) : 38 - 44
  • [38] Investigation of Drilling Machinability of Compacted Graphite Iron under Dry and Minimum Quantity Lubrication (MQL)
    Li, Yang
    Wu, Wenwu
    METALS, 2019, 9 (10)
  • [39] Performance assessment of vegetable oil-based nanofluid in Minimum Quantity Lubrication (MQL) during machining of Inconel 718
    Makhesana, Mayurkumar A.
    Patel, Kaushik M.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (03) : 3182 - 3198
  • [40] Nanofluid-based Minimum Quantity Lubrication (MQL) Face Milling of Inconel 625
    Singh, P.
    Dureja, J. S.
    Singh, H.
    Bhatti, M. S.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2019, 16 (03) : 6874 - 6888
12345