Effects of Selected Promoters on Ni/γ-Al2O3 Catalyst Performance in Methane Dry Reforming

被引:71
|
作者
Al-Fatesh, Ahmed S. A. [1 ]
Fakeeha, Anis H. [1 ]
Abasaeed, Ahmed E. [1 ]
机构
[1] King Saud Univ, Coll Engn, Dept Chem Engn, Riyadh 1142, Saudi Arabia
关键词
methane; dry reforming; coke; nickel; synthesis gas; stability; SYNTHESIS GAS; PARTIAL OXIDATION; NICKEL-CATALYST; COKE FORMATION; CH4; CONVERSION; SUPPORT; CALCIUM; OXIDES;
D O I
10.1016/S1872-2067(10)60267-7
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
The Ni catalysts supported on gamma-Al2O3 were synthesized by an impregnation method. Their catalytic performance in methane dry reforming was investigated. The reforming reactions were carried out in a microreactor using a CO2:CH4 feed ratio of 1:1, a F/W = 2640 ml/(h.g), reaction temperatures between 500-850 degrees C, and at atmospheric pressure. The influence of Ca, Ce, and Zr promoters on catalyst stability, coke deposition, and the H-2/CO ratio were also studied. Effluents were analyzed using an online gas chromatograph equipped with a thermal conductivity detector. The spent and fresh catalysts were characterized by scanning electron microscopy and thermogravimetric analysis. It was found that 3%Ni/gamma-Al2O3 promoted with 0.15% Ce and 0.05% Ca gave the best performance and resulted in less coke formation. The highest CH4 and CO2 conversion activities were found to be 94.1% and 98.3% at 850 degrees C, respectively. Stability tests were carried out for 130 h and this provided a H-2 yield of 91%. Moreover, the amount of formed carbon was negligible and did not increase to more than 1.5 wt%.
引用
收藏
页码:1604 / 1609
页数:6
相关论文
共 50 条
  • [21] Dry Reforming of Methane in a Dielectric Barrier Discharge Reactor with Ni/Al2O3 Catalyst: Interaction of Catalyst and Plasma
    Wang, Qi
    Yan, Bin-Hang
    Jin, Yong
    Cheng, Yi
    ENERGY & FUELS, 2009, 23 (08) : 4196 - 4201
  • [22] Effects of MgO and CaO on properties of Ni/γ-Al2O3 catalyst for the reforming of methane and steam
    Zhao, Yun-Li
    Lü, Yong-Kang
    Chang, Li-Ping
    Bao, Wei-Ren
    Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, 2010, 38 (02): : 218 - 222
  • [23] Influence of preparation method on the properties and catalytic performance of Ni/La2O3/Al2O3 catalyst for dry reforming of methane
    Xu, Jun-Ke
    Ren, Ke-Wei
    Zhou, Wei
    Wang, Xiao-Lei
    Li, Zhao-Jing
    Pan, Xiang-Min
    Ma, Jian-Xin
    Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, 2009, 37 (04): : 473 - 479
  • [24] Methane Reforming Using a Ni-Ag/γ-Al2O3 Catalyst
    Al-Fatesh, Ahmed S.
    Fakeeha, Anis H.
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2013, 46 (02) : 158 - 161
  • [25] Effect of promoters on the catalytic performance of Ni/Al2O3 catalyst for partial oxidation of methane to syngas
    Wang, HT
    Li, ZH
    Tian, SX
    REACTION KINETICS AND CATALYSIS LETTERS, 2004, 83 (02): : 245 - 252
  • [26] Effect of promoters on the catalytic performance of Ni/Al2O3 catalyst for partial oxidation of methane to syngas
    Hai-tao Wang
    Zhen-hua Li
    Shu-xun Tian
    Reaction Kinetics and Catalysis Letters, 2004, 83 : 245 - 252
  • [27] Kinetic Study of Dry Reforming of Methane Over Ni-Ce/Al2O3 Catalyst with Deactivation
    Zambrano, Daniel
    Soler, Jaime
    Herguido, Javier
    Menendez, Miguel
    TOPICS IN CATALYSIS, 2019, 62 (5-6) : 456 - 466
  • [28] Flexible hollow Ni/Al2O3 fibers: A sustainable and reusable catalyst for efficient dry reforming of methane
    Yan, Huihui
    Wang, Kun
    Zhao, Liping
    Zhang, Peng
    Chen, Han
    Liu, Jing
    Gao, Lian
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2024, 107 (10) : 6764 - 6773
  • [29] Dry reforming of methane over a Ni/Al2O3 catalyst in a coaxial dielectric barrier discharge reactor
    Tu, Xin
    Gallon, Helen J.
    Twigg, Martyn V.
    Gorry, Peter A.
    Whitehead, J. Christopher
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2011, 44 (27)
  • [30] Kinetics and reaction engineering studies of dry reforming of methane over a Ni/La/Al2O3 catalyst
    Olsbye, U
    Wurzel, T
    Mleczko, L
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 1997, 36 (12) : 5180 - 5188