Calibration of 10 nF Capacitance Standard from dc QHR using a Digital Impedance Bridge

被引：1

作者：

Ngoc Thanh Mai Tran ^{[1
,3
]}

Kim, Wan-Seop ^{[2
]}

Kim, Dan Bee ^{[2
]}

机构：

[1] Ist Nazl Ric Metrol, Str Cacce 91, I-10135 Turin, Italy

[2] Korea Res Inst Stand & Sci, 267 Gajeongno, Daejeon 34113, South Korea

[3] Politecn Torino, Corso Duca Abruzzi 24, I-10129 Turin, Italy

来源：

2020 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM) | 2020年

关键词：

Capacitance measurement; Calibration; Measurement uncertainty; FARAD; RESISTANCE;

D O I：

10.1109/cpem49742.2020.9191723

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper describes a calibration method for 10 nF capacitance standard from the primary standard of dc quantum Hall resistance using a multi-purpose digital coaxial bridge. The capacitance standard of 10 nF was calibrated by a direct comparison against the ac resistance standard of 10 k Omega- its resistance value is traced to the quantum Hall resistance- using the digital bridge in the fully digital quadrature mode. The preliminary calibration value of the 10 nF was confirmed by comparing with a reference capacitance standard within uncertainty level of 10(-6).

引用

页数：2

共 50 条

[31] Preliminary Study for the Establishment of DC Charge Calibration Facility at CSIR-NPL Using Charged Capacitance Source
Babita
Narula, L. K.
John, Thomas
Saleem, M.
Saxena, A. K.
MAPAN-JOURNAL OF METROLOGY SOCIETY OF INDIA, 2014, 29 (04): : 269 - 272
[32] Calibration of Rogowski Coils at Frequencies up to 10 kHz Using Digital Sampling
Djokic, Branislav
I2MTC: 2009 IEEE INSTRUMENTATION & MEASUREMENT TECHNOLOGY CONFERENCE, VOLS 1-3, 2009, : 418 - 422
[33] Calibration of Rogowski Coils at Frequencies up to 10 kHz Using Digital Sampling
Djokic, Branislav
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2010, 59 (05) : 1303 - 1308
[34] Calibration of AC Shunts at Frequencies up to 10 kHz Using Digital Sampling
Djokic, Branislav
Parks, Harold
2018 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM 2018), 2018,
[35] Standard Resistor Calibration Method in Measurement of Noise Source Impedance Using Dual-probe Approach
Zhao Bo
Zhao Min
Feng Zhiming
Yao Min
CEEM: 2009 5TH ASIA-PACIFIC CONFERENCE ON ENVIRONMENTAL ELECTROMAGNETICS, 2009, : 408 - +
[36] Comparison of a 100-pF Capacitor With a 12 906-Ω Resistor Using a Digital Impedance Bridge
Feige, Mona
Schlamminger, Stephan
Koffman, Andrew D.
Jarrett, Dean G.
Payagala, Shamith
Panna, Alireza
Waltrip, Bryan C.
Berilla, Michael
Seifert, Frank
Wang, Yicheng
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2022, 71
[37] Calibration of reference torque wrenches using a 10 N m deadweight torque standard machine
Nishino, Atsuhiro
Ogushi, Koji
Ueda, Kazunaga
MEASUREMENT, 2015, 61 : 1 - 8
[38] Capacitance measurement method using sinusoidal voltage injection in isolating phase-shifted full-bridge DC-DC converter output stage
Hannonen, Janne
Honkanen, Jari
Strom, Juha-Pekka
Korhonen, Juhamatti
Silventoinen, Pertti
Raisanen, Samuli
IET POWER ELECTRONICS, 2016, 9 (13) : 2543 - 2550
[39] Suppression of the Peak Harmonics from Loads by Using a Variable Capacitance Filter in Low-Voltage DC/DC Converters
Huang, Jin
Shi, Haixia
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2016, 58 (04) : 1217 - 1227
[40] Quantum Calibration System for Digital Voltmeters at Voltages from 10 nV to 1 kV
Georgakopoulos, Dimitrios
Budovsky, Ilya
Grady, Stephen
Hagen, Thomas
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2013, 62 (06) : 1581 - 1586

← 1 2 3 4 5 →