Calibration of 10 nF Capacitance Standard from dc QHR using a Digital Impedance Bridge

被引：1
|
作者：
Ngoc Thanh Mai Tran [1 ,3 ]
Kim, Wan-Seop [2 ]
Kim, Dan Bee [2 ]
机构：
[1] Ist Nazl Ric Metrol, Str Cacce 91, I-10135 Turin, Italy
[2] Korea Res Inst Stand & Sci, 267 Gajeongno, Daejeon 34113, South Korea
[3] Politecn Torino, Corso Duca Abruzzi 24, I-10129 Turin, Italy
来源：
2020 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM) | 2020年
关键词：
Capacitance measurement; Calibration; Measurement uncertainty; FARAD; RESISTANCE;
D O I：
10.1109/cpem49742.2020.9191723
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This paper describes a calibration method for 10 nF capacitance standard from the primary standard of dc quantum Hall resistance using a multi-purpose digital coaxial bridge. The capacitance standard of 10 nF was calibrated by a direct comparison against the ac resistance standard of 10 k Omega- its resistance value is traced to the quantum Hall resistance- using the digital bridge in the fully digital quadrature mode. The preliminary calibration value of the 10 nF was confirmed by comparing with a reference capacitance standard within uncertainty level of 10(-6).
引用
收藏
页数：2
相关论文
共 50 条
  • [1] Calibration of 10 nF capacitance standard from DC quantum Hall resistance using a digital impedance bridge
    Tran, Ngoc Thanh Mai
    Kucera, Jan
    Kim, Wan-Seop
    Kim, Dan Bee
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2023, 34 (07)
  • [2] CALIBRATION OF STANDARD WATTMETERS USING A CAPACITANCE BRIDGE AND A DIGITAL GENERATOR
    OLDHAM, NM
    PETERSONS, O
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 1985, 34 (04) : 521 - 524
  • [3] Calibration of 1 Ohm based on QHR standard using a commercial DCC bridge
    Yu, KM
    Kim, KT
    Song, YS
    Ihm, G
    2002 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS, CONFERENCE DIGEST, 2002, : 60 - 61
  • [4] 10-nF capacitance transfer standard
    Callegaro, L
    D'Elia, V
    Serazio, D
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2005, 54 (05) : 1869 - 1872
  • [5] A four-terminal-pair pulse-driven Josephson impedance bridge for 10 nF:10 nF capacitance ratio measurements
    Pimsut, Yaowaret
    Bauer, Stephan
    Herick, Jonas
    Palafox, Luis
    Kieler, Oliver
    Behr, Ralf
    2020 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM), 2020,
  • [6] Frequency calibration of voltage transformers by digital capacitance bridge
    Crotti, G.
    Giordano, D.
    Modarres, M.
    Gallo, D.
    Landi, C.
    Luiso, M.
    2015 IEEE INTERNATIONAL WORKSHOP ON APPLIED MEASUREMENTS FOR POWER SYSTEMS (AMPS) PROCEEDINGS, 2015, : 155 - 160
  • [7] A novel two-terminal-pair pulse-driven Josephson impedance bridge linking a 10 nF capacitance standard to the quantized Hall resistance
    Bauer, S.
    Behr, R.
    Hagen, T.
    Kieler, O.
    Lee, J.
    Palafox, L.
    Schurr, J.
    METROLOGIA, 2017, 54 (02) : 152 - 160
  • [8] Coaxial and Digital Impedance Bridges for Capacitance Measurements at the nF Range
    de Barros e Vasconcellos, Renata T.
    de Lima, Vladimir Rodrigues
    Kurten Ihlenfeld, Waldemar G.
    da Silveira, Flavio
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2017, 66 (06) : 1553 - 1559
  • [9] Comparison of a 1 nF Capacitor with a 1 kΩ Resistor Using a Digital Impedance Bridge
    Wang, Y.
    Schlamminger, S.
    Jarrett, D.
    Panna, A.
    Koffman, A. D.
    2024 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS, CPEM 2024, 2024,
  • [10] A proposed capacitance bridge using a modern inductance standard
    Diamond, Joseph M.
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2006, 55 (05) : 1573 - 1575
12345