Structural evolution of oxide dispersion strengthened austenitic powders during mechanical alloying and subsequent consolidation

被引：33
|
作者：
Wang, Man [1 ]
Sun, Hongying [2 ]
Zou, Lei [1 ]
Zhang, Guangming [1 ]
Li, Shaofu [1 ]
Zhou, Zhangjian [1 ]
机构：
[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 10083, Peoples R China
[2] Anyang Inst Technol, Sch Mech Engn, Anyang 455002, Henan, Peoples R China
来源：
POWDER TECHNOLOGY | 2015年 / 272卷
关键词：
Mechanical alloying; ODS austenitic steels; Phase transition; FERRITIC ALLOYS; MICROSTRUCTURAL EVOLUTION; COMPOSITE POWDERS; STEELS; DEFORMATION; REACTORS; SIZE;
D O I：
10.1016/j.powtec.2014.12.008
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Different austenitic steel powders with additions of Y2O3 and Ti were fabricated by mechanical alloying (MA). The structural evolutions during the process of ball milling and subsequent annealing were studied by XRD, SEM and TEM. Nano crystalline austenitic powders were obtained by MA. Different ODS austenitic powders presented different phase transition during the process of MA and annealing, which were resulted from different contents of Ni and Cr. Both ODS-316 and ODS-310 showed a weak diffraction peak of a after annealing and consolidated by hot isostatic pressing (HIP) due to the addition of Ti. According to the TEM results, the grain size of all three ODS austenitic steels was around several hundred nanometers. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：309 / 315
页数：7
相关论文
共 50 条
  • [31] Characterization and sinterability of oxide-dispersion strengthened nickel powder produced by mechanical alloying
    K. E. Mohamed
    H. P. Buchkremer
    D. Stover
    Journal of Materials Engineering and Performance, 2000, 9 : 370 - 378
  • [32] Microstructure and Mechanical Properties of Ultrafine-Grained Austenitic Oxide Dispersion Strengthened Steel
    Mao, Xiaodong
    Kang, Suk Hoon
    Kim, Tae Kyu
    Kim, Seul Cham
    Oh, Kyu Hwan
    Jang, Jinsung
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (11): : 5334 - 5343
  • [33] Characterization and sinterability of oxide-dispersion strengthened nickel powder produced by mechanical alloying
    Mohamed, KE
    Buchkremer, HP
    Stover, D
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2000, 9 (04) : 370 - 378
  • [34] MECHANICAL ALLOYING OF DISPERSION STRENGTHENED NI BASE SUPERALLOY
    OCHI, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1614 - 1614
  • [35] Microstructural studies of oxide dispersion strengthened austenitic steels
    Suresh, Koppoju
    Nagini, M.
    Vijay, R.
    Ramakrishna, M.
    Gundakaram, Ravi. C.
    Reddy, A. V.
    Sundararajan, G.
    MATERIALS & DESIGN, 2016, 110 : 519 - 525
  • [36] Evolution of structure in austenitic steel powders during ball milling and subsequent sintering
    Oleszak, D.
    Grabias, A.
    Pekala, M.
    Świderska-Środa, A.
    Kulik, T.
    Journal of Alloys and Compounds, 2007, 434-435 (SPEC. ISS.): : 340 - 343
  • [37] Dispersion-strengthened aluminium prepared by mechanical alloying
    Besterci, M
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2000, 15 (3-5): : 356 - 408
  • [38] Dispersion strengthened materials obtained by mechanical alloying -: An overview
    Weissgärber, T
    Kieback, BF
    METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, PTS 1 AND 2, 2000, 343-3 : 275 - 283
  • [39] Evolution of structure in austenitic steel powders during ball milling and subsequent sintering
    Oleszak, D.
    Grabias, A.
    Pekala, M.
    Swiderska-Sroda, A.
    Kulik, T.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 434 : 340 - 343
  • [40] STRUCTURAL EVOLUTION IN NIOBIUM BERYLLIDES DURING MECHANICAL ALLOYING
    CHOU, TC
    NIEH, TG
    WADSWORTH, J
    SCRIPTA METALLURGICA ET MATERIALIA, 1992, 27 (07): : 881 - 886
12345