Boiling heat transfer in rectangular microchannels with reentrant cavities

被引:210
|
作者
Kosar, A [1 ]
Kuo, CJ [1 ]
Peles, Y [1 ]
机构
[1] Rensselaer Polytech Inst, Dept Mech Aerosp & Nucl Engn, Troy, NY 12180 USA
基金
美国国家科学基金会;
关键词
microchannels; boiling; reentrant cavity; enhanced;
D O I
10.1016/j.ijheatmasstransfer.2005.06.003
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper investigates flow boiling of water in microchannels with a hydraulic diameter of 227 mu m possessing 7.5 mu m wide reentrant cavities on the sidewalls. Average two-phase heat transfer coefficients and CHF conditions have been obtained over a range of effective heat fluxes (28-445 W/cm(2)) and mass velocities (41-302 kg/m(2) s). High Boiling number and Reynolds number have been found to promote convective boiling, while Nucleate Boiling dominated at low Reynolds number and Boiling number. A criterion for the transition between nucleate and convective boiling has been provided. Existing correlations did not provide satisfactory agreement with the heat transfer coefficient but did predict CHF conditions well. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:4867 / 4886
页数:20
相关论文
共 50 条
  • [21] Geometrical design of minichannels with rectangular wall cavities for flow boiling heat transfer enhancement
    Yaghoubi, Mohammad Sina
    Ahmadpour, Ali
    Saffar-Avval, Majid
    RESULTS IN ENGINEERING, 2025, 25
  • [22] Numerical and geometric investigation of pool boiling heat transfer in cavities with isothermal rectangular corrugations
    Freire, Gabryell Malcher
    Biserni, Cesare
    Naldi, Claudia
    Centeno, Felipe Roman
    Isoldi, Liercio Andre
    Rocha, Luiz Alberto Oliveira
    de Escobar, Cicero Coelho
    dos Santos, Elizaldo Domingues
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2025, 236
  • [23] Numerical modelling of boiling heat transfer in microchannels
    Sarangi, R. K.
    Bhattacharya, A.
    Prasher, R. S.
    APPLIED THERMAL ENGINEERING, 2009, 29 (2-3) : 300 - 309
  • [24] Numerical modelling of boiling heat transfer in microchannels
    Sarangi, R. K.
    Bhattacharya, A.
    Prasher, R. S.
    Narasimhan, S.
    PROCEEDINGS OF THE ASME HEAT TRANSFER DIVISION 2005, VOL 1, 2005, 376-1 : 739 - 748
  • [25] Effect of wall contact angle on the conjugate heat transfer for flow boiling processes in rectangular microchannels
    Wang, Jian
    Li, Zhiqiang
    Yu, Hao
    Liu, Linhua
    Xiang, Gao-Ming
    Yang, Jia-Yue
    PHYSICS OF FLUIDS, 2024, 36 (11)
  • [26] Study on bubble behaviors and heat transfer at shallow liquid boiling over open rectangular microchannels
    Dong, Yifang
    Ibrahim, Adnan
    Su, Ruihai
    Jiao, Binbin
    Hu, Xuegong
    Hao, Yong
    APPLIED THERMAL ENGINEERING, 2024, 254
  • [27] HEAT TRANSFER ACROSS RECTANGULAR CAVITIES
    PROBERT, SD
    BROOKS, RG
    DIXON, M
    CHEMICAL AND PROCESS ENGINEERING, 1970, : 35 - &
  • [28] Heat transfer performance of microchannels with different reentrant cavities based on field synergy principle and entropy production analysis
    Hou, Tingbo
    Lin, Shusen
    Tu, Zhibiao
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2024, 158
  • [29] Molecular dynamics study on enhanced nucleate boiling heat transfer on nanostructured surfaces with rectangular cavities
    Zhou, Wenbin
    Han, Dongmei
    Ma, Hualin
    Hu, Yanke
    Xia, Guodong
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 191
  • [30] Lattice Boltzmann simulation of flow boiling heat transfer process in a horizontal microchannel with rectangular cavities
    Li, Jie
    Zheng, Lin
    Cui, Hutao
    COMPUTERS & FLUIDS, 2024, 280