Interfacial reactions and mechanical properties of SiC fiber reinforced Ti3SiC2 and Ti3(SiAl)C2 composites

被引:17
|
作者
He, Guangqi [1 ,2 ]
Xu, Jingjun [2 ]
Zhang, Zerong [2 ]
Qian, Yuhai [2 ]
Zuo, Jun [2 ]
Li, Meishuan [2 ]
Liu, Changsheng [1 ]
机构
[1] Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China
[2] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2021年 / 827卷
基金
中国国家自然科学基金;
关键词
MAX phase; Composite; SiC fiber; Mechanical properties; PLASMA SINTERED TI3SIC2; CARBON-FIBER; MATRIX COMPOSITES; SILICON-CARBIDE; MICROSTRUCTURE; TEMPERATURE; FABRICATION; DENSIFICATION; SICF/TI3SIC2; CERAMICS;
D O I
10.1016/j.msea.2021.142069
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this paper, SiC fiber (SiCf) reinforced Ti3SiC2 and Ti3(SiAl)C2 composites were fabricated by spark plasma sintering at 1250 degrees C and 1300 degrees C for 10 min, respectively. The interfacial reactions between fibers and matrix, as well as the mechanical properties of the two composites, were investigated. XRD, SEM and TEM were used to characterize the phase compositions and microstructures of the as-synthesized composites. The results showed that no interfacial reaction occurred between SiCf and Ti3SiC2 matrix, while it occurred between SiCf fiber and Ti3(SiAl)C2 matrix. In the latter case, the interfacial reaction layer was mainly composed of SiC, TiC, and TiSi2 phases, and its thickness was about 1.2 mu m. Besides, due to the introduction of SiC fibers, both bending strength and fracture toughness of two composites were improved. Based on the investigation of crack propagation, it was proposed that the main strengthening and toughening mechanism was crack bowing for SiCf/Ti3(SiAl)C2 composite, while was fiber pullout, fiber debonding, and residual thermal stress for SiCf/Ti3SiC2 composite.
引用
收藏
页数:9
相关论文
共 50 条
  • [41] Reactive sintering and thermodynamics of Ti3SiC2/SiC composites
    Chahhou, Bilal
    Roger, Jerome
    CERAMICS INTERNATIONAL, 2022, 48 (23) : 34635 - 34649
  • [42] Thermophysical Properties of Ti3SiC2 MAX Phase Composites with SiC Reinforcement
    Bajpai, Shipra
    Ma, Beihai
    Singh, Dileep
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2025,
  • [43] Oxidation of Ti3SiC2 composites in air
    Chen, T
    Green, PM
    Jordan, JL
    Hampikian, JM
    Thadhani, NN
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (06): : 1737 - 1742
  • [44] Oxidation of Ti3SiC2 composites in air
    T. Chen
    P. M. Green
    J. L. Jordan
    J. M. Hampikian
    N. N. Thadhani
    Metallurgical and Materials Transactions A, 2002, 33 : 1737 - 1742
  • [45] Effects of A-site atoms in Ti2AlC and Ti3SiC2 MAX phases reinforced Mg composites: Interfacial structure and mechanical properties
    Yu, Wenbo
    Pi, Xufeng
    Chen, Wantong
    Vallet, Maxime
    Guitton, Antoine
    Zhang, Laiqi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 826
  • [46] Preparation and mechanical properties of Ti3SiC2/SiC functionally graded materials
    Cai, Yanzhi
    Cheng, Laifei
    Yin, Hongfeng
    Yin, Xiaowei
    Tian, Yangli
    Chen, Jinxue
    Wang, Nan
    CERAMICS INTERNATIONAL, 2017, 43 (09) : 6648 - 6658
  • [47] Fabrication and properties of TiC/Ti3SiC2 composites and FGMs
    Shi, SL
    Pan, W
    Wang, RG
    Luo, YM
    FUNCTIONALLY GRADED MATERIALS VII, 2003, 423-4 : 199 - 202
  • [48] Synthesis and properties of TiB2/Ti3SiC2 composites
    Islak, Bilge Yaman
    Candar, Duygu
    CERAMICS INTERNATIONAL, 2021, 47 (01) : 1439 - 1446
  • [49] Preparation and tribological properties of Ti3SiC2/Cu composites
    Liu K.
    Wang L.
    Yang C.
    Jin S.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2020, 37 (11): : 2844 - 2852
  • [50] Mechanical damping in porous Ti3SiC2
    Fraczkiewicz, M.
    Zhou, A. G.
    Barsoum, M. W.
    ACTA MATERIALIA, 2006, 54 (19) : 5261 - 5270