Experimental investigation of silane combustion and particle nucleation using a rapid-compression facility

被引:11
|
作者
Donovan, MT [1 ]
He, X [1 ]
Zigler, B [1 ]
Palmer, TR [1 ]
Walton, SM [1 ]
Wooldridge, MS [1 ]
机构
[1] Univ Michigan, Dept Mech Engn, Ann Arbor, MI 48109 USA
关键词
silane; combustion; hydroxyl radical; absorption spectroscopy; rapid-compression facility; particle nucleation;
D O I
10.1016/j.combustflame.2005.01.011
中图分类号
O414.1 [热力学];
学科分类号
摘要
Ignition and reaction kinetics of silane/oxygen/diluent (SiH4/O-2/Ar/N-2) mixtures have been studied using a rapid compression facility (RCF). Time-resolved pressure profiles and absolute, quantitative hydroxyl radical mole fraction (chi(OH)) time histories were obtained for a range of conditions representing different heating rates. At the moderate temperatures studied (similar to 630 K), ignition was observed to occur in two stages with no OH detected during the first stage. The separation of the two stages was typically > 5 ins, thus the long test times provided by the RCF were critical to the studies. The second stage of reaction is identified by significant production of OH (chi(OH) = 45-82 ppm). Experimental uncertainty in chi(OH) was 32/-29 % with a 15 ppm detectivity limit. The results were examined in the context of proposed silane combustion and particle nucleation reaction mechanisms. Existing silane combustion kinetics mechanisms capture many of the experimentally observed features of the system, yet fail to quantitatively reproduce the OH time histories in their entirety. (c) 2005 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
引用
收藏
页码:360 / 370
页数:11
相关论文
共 50 条
  • [31] The experimental and numerical investigation of biofuels on combustion and tribology characteristics in a compression ignition engine
    Temizer, Ilker
    Gucer, Firat
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024, 238 (04) : 1903 - 1915
  • [32] Experimental investigation on the effect of mixed additives on homogeneous charge compression ignition combustion
    Li, Chao
    Ji, Chang-Wei
    He, Hong
    Shen, Zi-You
    He, Chao
    Li, Yun-Zhe
    Ma, Chong-Fang
    Binggong Xuebao/Acta Armamentarii, 2007, 28 (05): : 598 - 603
  • [33] Investigation on Effects of Ignition Configurations on Knocking Combustion Using an Optical Rapid Compression Machine under Lean to Stoichiometric Conditions
    Liu, Wei
    Qi, Yunliang
    He, Xin
    Wang, Zhi
    COMBUSTION SCIENCE AND TECHNOLOGY, 2022, 194 (08) : 1678 - 1699
  • [34] Review of the Investigation of Fuel-Air Premixing and Combustion Process using Rapid Compression Machine and Direct Visualization System
    Jaat, M.
    Khalid, Amir
    Manshoor, B.
    Basharie, S. M.
    Ramsy, Him
    4TH MECHANICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 2014, 465-466 : 265 - 269
  • [35] Experimental study of syngas combustion at engine-like conditions in a rapid compression machine
    Monteiro, Eliseu
    Sotton, Julien
    Bellenoue, Marc
    Moreira, Nuno Afonso
    Malheiro, Salvador
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2011, 35 (07) : 1473 - 1479
  • [36] Experimental Investigation of Particle Deagglomeration using Turbulence
    Koeksoy, Cagatay
    Ertunc, Oezguer
    Huettner, Sebastian
    Wachtel, Herbert
    Delgado, Antonio
    13TH EUROPEAN TURBULENCE CONFERENCE (ETC13): REACTING, COMPRESSIBLE, MULTI-PHASE AND CRYOGENIC FLOWS, 2011, 318
  • [37] EXPERIMENTAL INVESTIGATION OF A NOVEL COMBINED RAPID COMPRESSION-IGNITION COMBUSTION AND SOLID OXIDE FUEL CELL SYSTEM FORMAT OPERATING ON DIESEL
    Ahn, Andrew
    Welles, Thomas Stone
    Akih-Kumgeh, Benjamin
    Milcarek, Ryan J.
    PROCEEDINGS OF THE ASME 2021 POWER CONFERENCE (POWER2021), 2021,
  • [38] Investigation of Sheet Metal Forming Using a Rapid Compression Machine
    Patil, Sandeep P.
    Fenard, Yann
    Bailkeri, Shridhar
    Heufer, Karl Alexander
    Markert, Bernd
    MATERIALS, 2019, 12 (23)
  • [39] Investigation of methanol ignition phenomena using a rapid compression machine
    Wang, Yingdi
    Qi, Yunliang
    Liu, Wei
    Wang, Zhi
    COMBUSTION AND FLAME, 2020, 211 : 147 - 157
  • [40] Experimental investigation of ignition and combustion characteristics of aluminum particle-laden flow
    Yu, Wenhao
    Li, Shipeng
    Liu, Mengying
    Song, Rui
    Wang, Junlong
    Wang, Ningfei
    Deng, Zhe
    ACTA ASTRONAUTICA, 2021, 185 : 14 - 24