Prediction of 3D Chip Formation in the Facing Cutting with Lathe Machine Using FEM

被引：0
|
作者：
Prasetyo, Yudhi [1 ,2 ]
Tauviqirrahman, Mohamad [2 ]
Rusnaldy [2 ]
机构：
[1] SMK Negeri 7, Dept Mech Engn, Jl Simpang Lima 50241, Semarang, Indonesia
[2] Univ Diponegoro, Fac Engn, Dept Mech Engn, Tembalang 50725, Semarang, Indonesia
来源：
3RD INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS SCIENCE AND TECHNOLOGY (ICAMST 2015) | 2016年 / 1725卷
关键词：
METAL-MATRIX COMPOSITES; TOOL WEAR;
D O I：
10.1063/1.4945513
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents the prediction of the chip formation at the machining process using a lathe machine in a more specific way focusing on facing cutting (face turning). The main purpose is to propose a new approach to predict the chip formation with the variation of the cutting directions i.e., the backward and forward direction. In addition, the interaction between stress analysis and chip formation on cutting process was also investigated. The simulations were conducted using three dimensional (3D) finite element method based on ABAQUS software with aluminum and high speed steel (HSS) as the workpiece and the tool materials, respectively. The simulation result showed that the chip resulted using a backward direction depicts a better formation than that using a conventional (forward) direction.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] Precise chip and package 3D capacitance simulations of realistic interconnects using a general purpose FEM-tool
    Infinion Technologies Corp, Hopewell Junction, United States
    IEEE Top Meet Ekectr Perform Electron Packag, (111-114):
  • [32] Design for Thermo-Mechanical Reliability of a 3D Microelectronic Component Using 3D FEM
    Soufyane, Belhenini
    Abdellah, Tougui
    Franck, Dosseul
    2014 15TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2014,
  • [33] Architecture Prediction of 3D Composites Using Machine Learning and No-Destructive Technique
    Zhang, Xiuli
    Wang, Ziping
    Xu, Chen
    Side, Conner
    Sang, Sheng
    ADVANCED THEORY AND SIMULATIONS, 2024, 7 (02)
  • [34] Characteristics investigation of a new type AFPM machine according to the geometric structure of rotor using 3D FEM
    Lee, Byung-Jun
    Kim, Byoung-Kuk
    Cho, Yun-Hyun
    Chun, Yon-Do
    Koo, Dae-Hyun
    COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2008, 27 (04) : 788 - 796
  • [35] 3D-FEM Modeling of Gear Skiving to Investigate Kinematics and Chip Formation Mechanisms
    Schulze, Volker
    Kuehlewein, Christoph
    Autenrieth, Hermann
    MODELLING OF MACHINING OPERATIONS, 2011, 223 : 46 - +
  • [36] Heat transfer enhancement for 3D chip thermal simulation and prediction
    Wang, Chao
    Vafai, Kambiz
    APPLIED THERMAL ENGINEERING, 2024, 236
  • [37] Train-induced vibration prediction in tunnels using 2D and 3D FEM models in time domain
    Real, T.
    Zamorano, C.
    Ribes, F.
    Real, J. I.
    TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2015, 49 : 376 - 383
  • [38] Study on cutting force and cutting temperature of coated carbide turning inserts with 3D chip-breaker
    He, Yun
    Xiao, Min
    Ni, Hao
    Bian, Yi Chuan
    Wang, Min
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 909 - 913
  • [39] 3D chip stack technology using through-chip interconnects
    Benkart, P
    Heittmann, A
    Huebner, H
    Ramacher, U
    Kaiser, A
    Munding, A
    Bschorr, M
    Pfleiderer, HJ
    Kohn, E
    IEEE DESIGN & TEST OF COMPUTERS, 2005, 22 (06): : 512 - 518
  • [40] 3D and microstructural analysis of the chip formation during high speed cutting of C45E (AISI 1045)
    Bach, FW
    Schäperkötter, M
    ZEITSCHRIFT FUR METALLKUNDE, 2004, 95 (11): : 1031 - 1039
12345