Effect of impinging jet pulsation on primary and secondary vortex characteristics

被引:13
|
作者
Raizner, M. [1 ]
van Hout, R. [1 ]
机构
[1] Technion Israel Inst Technol, Fac Mech Engn, Haifa, Israel
关键词
Impinging jet; Pulsating jet; Heat and mass transfer; Primary and secondary vortices; Particle image velocimetry; CONVECTIVE HEAT-TRANSFER; FLOW-FIELD; STAGNATION REGION; TURBULENCE; LAYER;
D O I
10.1016/j.ijheatmasstransfer.2020.119445
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this study, the effect of impinging air jet pulsation on the generation of toroidal ("primary") vortices near to the nozzle exit, their subsequent downstream evolution, the creation of "secondary" vortices and their interaction along the radial wall jet was investigated. Experiments were performed using particle image velocimetry and data analysis was based on the determined instantaneous vorticity and swirling strength fields. Reynolds numbers based on the average jet exit velocity were Re = 4606, 8024 and 13,513, whereas jet pulsation Strouhal numbers ranged from 2.0 x 10(-3) to 15.6 x 10(-3). The present results showed that jet pulsation significantly affected both the primary and the secondary vortex numbers, areas, and strengths. However, the actual change in vortex strength depended on the phase and the jet Reynolds number. Secondary vortex strengths increased up to twice the value obtained for the steady jet case. However, no enhancement was measured when the Strouhal number exceeded 8.5x10(-3). Conditionally averaged data indicated that secondary vortex generation in the pulsating jet is similar as for the baseline steady jet case. The different contributions to the averaged vorticity equation showed that the mean vortex stretching term strengthened primary and secondary vortices. Further away from the stagnation point, wall-normal diffusion of fluctuating, azimuthal vorticity weakened the vortices. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页数:14
相关论文
共 50 条
  • [41] Research progress of vortex characteristics of impinging stream reactor
    Zhang J.
    Gao W.
    Feng Y.
    Zhang Y.
    Dong X.
    Huagong Jinzhan/Chemical Industry and Engineering Progress, 2021, 40 (11): : 5883 - 5893
  • [42] Holographic investigation of the effect of elevated ambient temperature on the atomization characteristics of impinging jet sprays
    Shen, Y
    Mitts, C
    Poulikakos, D
    ATOMIZATION AND SPRAYS, 1997, 7 (02) : 123 - 142
  • [43] Effect of staggered arrays on cooling characteristics of impinging water jet on a hot steel plate
    Lee, J.
    Kim, T. H.
    Do, K. H.
    Oh, D-W.
    Park, J. M.
    METALLURGIA ITALIANA, 2014, (04): : 13 - 20
  • [44] EFFECT OF CONTROLLED PULSATION ON AXISYMMETRICAL JET BEHAVIOR
    SENO, T
    KAGEYAMA, S
    ITO, R
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1987, 20 (02) : 128 - 133
  • [45] Effect of high-frequency jet velocity perturbations on impinging jets atomization characteristics
    Li, Yuan
    Tang, Chenglong
    Zhang, Peng
    PHYSICS OF FLUIDS, 2023, 35 (10)
  • [46] Characteristics of an Axysymmetrical Jet Impinging on a Flat Obstacle.
    Yudaev, B.N.
    Aralov, A.D.
    Stkepanov, S.I.
    Izvestiya Vysshikh Uchebnykh Zavedenii, Mashinostroenie, 1977, (01): : 94 - 100
  • [47] Heat Transfer Characteristics of a Swirling Laminar Impinging Jet
    Ichimiya, Koichi
    Tsukamoto, Koji
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2010, 132 (01): : 1 - 5
  • [48] Experimental study of flow characteristics of an oblique impinging jet
    Mishra, Abhishek
    Yadav, Harekrishna
    Djenidi, Lyazid
    Agrawal, Amit
    EXPERIMENTS IN FLUIDS, 2020, 61 (03)
  • [49] Flow field and noise characteristics of a supersonic impinging jet
    Krothapalli, A.
    Rajkuperan, E.
    Alvi, F.
    Lourenco, L.
    Journal of Fluid Mechanics, 1999, 392 : 155 - 181
  • [50] Experimental study of flow characteristics of an oblique impinging jet
    Abhishek Mishra
    Harekrishna Yadav
    Lyazid Djenidi
    Amit Agrawal
    Experiments in Fluids, 2020, 61