Fe2O3 supported on hollow micro/mesospheres silica for the catalytic partial oxidation of H2S to sulfur

A family of Fe-based catalysts supported hollow silica mesospheres has been synthesized and tested in the catalytic partial oxidation of H2S to elemental sulfur at 170.180 degrees C, atmospheric pressure and under 300 min of time-on-stream. The characterization of the synthesized catalysts by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-vis spectra (DRS), H-2-termoprogrammed reduction (H-2-TPR), N-2 adsorption-desorption at -196 degrees C and X-ray photoelectron spectroscopy (XPS) reveals the formation of a catalytic system with high micro- and mesoporosity with high dispersion of the Fe2O3 species. The catalytic results reported high activity in the selective oxidation of H2S, reaching a highest conversion value close to 94% with a selectivity towards elemental sulfur of 98% after 300 min of time on stream (TOS) at 180 degrees C for the HMS-10Fe catalyst. The comparison of Fe-containing HMS (10 wt% of iron loading) with other SiO2-based supports, as a fumed silica (Cab-osil) or a mesoporous silica (SBA-15), presents different H2S conversion values, following the next trend: HMS-10Fe > SBA-10Fe > Cab-10Fe. These results suggest that the use of a support with a narrow pore tend to facilitate the iron dispersion favoring higher conversion rates.