Fibre misalignment in filament wound tubes

被引：2
|
作者：
Stecenko, TB
Piggott, MR
机构：
[1] Vinca Inst Nucl Sci, Belgrade, Yugoslavia
[2] Univ Toronto, Dept Chem Engn & Appl Chem, Adv Composites Phys & Chem Grp, Toronto, ON M5S 1A4, Canada
来源：
ADVANCED MATERIALS AND PROCESSES: YUCOMAT II | 1998年 / 282-2卷
关键词：
filament winding; glass fibre epoxy resin composites; fibre misalignment; radial strength;
D O I：
10.4028/www.scientific.net/MSF.282-283.257
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Glass fibres/epoxy resin composites were produced by filament winding as circular section tubes. The composites were produced with 6, 12, and 24 layers. They were sectioned and examined for fibre misalignment in plane and out of plane. The angular deviations were significant and it was found that in-place misalignment was more pronounced than out of-plane. The composites were tested in three-point bending as ring type specimens. The obtained results for radial strength could be correlated with the angular deviations, giving the decrease in radial strength with increasing out of plane and in plane deviations. The observed effect is believed to be due to the defects in the resin, as with the larger angular deviations the larger volume of resin between fibre layers is subjected to the maximum interlaminar tensile stresses.
引用
收藏
页码：257 / 262
页数：6
相关论文
共 50 条
  • [31] Tensile behavior of filament-wound glass reinforced elastomeric tubes
    Bakis, CE
    Orlet, MW
    BRIDGING THE CENTURIES WITH SAMPE'S MATERIALS AND PROCESSES TECHNOLOGY, VOL 45, BOOKS 1 AND 2, 2000, : 1407 - 1416
  • [32] Consolidation and Warpage Deformation Finite Element Analysis of Filament Wound Tubes
    Li, Jun
    Dong, Chensong
    Chen, Shenshen
    APPLIED COMPOSITE MATERIALS, 2009, 16 (05) : 307 - 320
  • [33] The effect of stress ratio on the fracture morphology of filament wound composite tubes
    Martins, L. A. L.
    Bastian, F. L.
    Netto, T. A.
    MATERIALS & DESIGN, 2013, 49 : 471 - 484
  • [34] Characterisation of the Tensile and Fracture Properties of Filament Wound Natural Fibre Rings
    Bobba, Sujith
    Leman, Z.
    Zainudin, E. S.
    Sapuan, S. M.
    4TH INTERNATIONAL CONFERENCE ON THE SCIENCE AND ENGINEERING OF MATERIALS (ICOSEM 2019), 2020, 2284
  • [35] Failure analysis of graphite/epoxy filament wound tubes under cyclic loading
    Masudi, H
    Green, J
    PROCEEDINGS OF THE 10TH (2000) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL IV, 2000, : 66 - 71
  • [36] Simulation of process-induced residual stresses in thick filament wound tubes
    Li, C
    Wisnom, MR
    Stringer, LG
    DE SIGN, MANUFACTURING AND APPLICATIONS OF COMPOSITES, 2003, : 271 - 282
  • [37] Damage Detection of CFRP Filament Wound Tubes Using Electrical Resistance Measurement
    Schmidova, Nikola
    Ponizil, Tomas
    Kropik, Bohumil
    Blaha, David
    Tatickova, Zuzana
    Dvorak, Milan
    Doubrava, Karel
    Ruzicka, Milan
    23 EUROPEAN CONFERENCE ON FRACTURE, ECF23, 2022, 42 : 1306 - 1313
  • [38] Performance of hybrid filament wound composite tubes subjected to quasi static indentation
    Zuraida, A.
    Khalid, Asad. A.
    Ismail, A. F.
    MATERIALS & DESIGN, 2007, 28 (01) : 71 - 77
  • [39] PROGRESSIVE FAILURE ANALYSIS OF FILAMENT WOUND COMPOSITE TUBES UNDER INTERNAL PRESSURE
    Almeida Jr, Jose Humberto S.
    Ribeiro, Marcelo L.
    Tita, Volnei
    Faria, Hugo
    Marques, Antonio T.
    Amico, Sandro C.
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [40] Strength analysis and hydrostatic test for fibre filament-wound tube with lining
    Xu, Guang-Lei
    Ruan, Wen-Jun
    Wang, Hao
    Yang, Qing-Ping
    Gongneng Cailiao/Journal of Functional Materials, 2012, 43 (20): : 2772 - 2776
12345