Evaluation method of damping ratio for spot-welded frame

被引：0
|
作者：
Katayama, T [1 ]
Aoyama, E [1 ]
Hirogaki, T [1 ]
Andoh, H [1 ]
Enoki, S [1 ]
Nakajima, M [1 ]
机构：
[1] Doshisha Univ, Fac Engn, Kyoto, Japan
来源：
PROCEEDINGS OF ISMA 2002: INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING, VOLS 1-5 | 2002年
关键词：
D O I：
暂无
中图分类号：
O42 [声学];
学科分类号：
070206 ; 082403 ;
摘要：
The purpose of this study is a purpose to construct the cab model of the construction machinery that design engineer is able to carry out the dynamic analysis, especially frequency response analysis, in conceptual design stage easily. As a previous step of the frequency response analysis for the cab model, evaluation method of damping ratio for spot-welded frame was suggested in this paper. First, the impulse excitation experiments for three types of test pieces, flat type, hat type, and spot-welded frame, were carried out to investigate the difference of those damping ratios. Next, it was considered that damping was mainly caused by friction of spot-welded points in the flange. Then, it was assumed that all of energy loss by friction damping was converted to the heating energy. Therefore damping ratio could be identified by measuring the temperature difference by using the thermography, as single degree of freedom for a spot pitch. As a result, it was clarified that damping ratio for spot-welded frame was dependent on frequency and acceleration.
引用
收藏
页码：2291 / 2298
页数：8
相关论文
共 50 条
  • [31] Effect of thermal aging on the damping properties of a resistance spot-welded acrylic-cored laminated steel
    Wang, PC
    Fridrich, RJ
    WELDING JOURNAL, 1997, 76 (10) : S421 - S430
  • [32] Strength of spot-welded steel sheets in corrosive environment
    Mukhopadhyay, G.
    Bhattacharya, S.
    Ray, K. K.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2010, 61 (05): : 398 - 406
  • [33] Efficient Compliant Variation Simulation of Spot-Welded Assemblies
    Lorin, Samuel
    Lindau, Bjorn
    Lindkvist, Lars
    Soderberg, Rikard
    JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 2019, 19 (01)
  • [34] NEW METHODS OF EVALUATING THE DUCTILITIES OF SPOT-WELDED JOINTS
    ZOLOTAREV, BB
    GUZIKOV, EP
    SHAVYRIN, VN
    AUTOMATIC WELDING USSR, 1980, 33 (10): : 38 - 40
  • [35] Fatigue analysis of spot-welded joint for automative structures
    Faculty of Mechanical Engineering, Universiti Malaysia Pahang, P. O. Box 12, 25000 Kuantan, Pahang, Malaysia
    不详
    SDHM Struct. Durability Health Monit., 2008, 3 (173-180):
  • [36] Performance of shell elements in modeling spot-welded joints
    Chen, W
    Deng, X
    FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2000, 35 (01) : 41 - 57
  • [37] A study on bending stiffness of spot-welded plate structure
    Han, GJ
    Ahn, SC
    Shim, JJ
    Han, DS
    Kim, TH
    PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON PRECISION MECHANICAL MEASUREMENT, VOL 4, 2002, : 659 - 664
  • [38] Design of an in situ mechanical test for spot-welded joints
    Payen, G. R.
    Kloecker, H.
    Lens, A.
    Wilkinson, D. S.
    Embury, J. D.
    ENGINEERING FRACTURE MECHANICS, 2012, 96 : 528 - 538
  • [39] Nonlinear mechanical properties of spot-welded structures for automobile
    School of Automobile and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China
    Jiangsu Daxue Xuebao Ziran Kexue Ban J. Jiangsu Univ. Nat. Sci. Ed., 2006, 4 (351-355):
  • [40] Numerical study of strengths of spot-welded joints of steel
    Kong, X.
    Yang, Q.
    Li, B.
    Rothwell, G.
    English, R.
    Ren, X. J.
    MATERIALS & DESIGN, 2008, 29 (08): : 1554 - 1561
12345