Evaluation method of damping ratio for spot-welded frame

被引：0
|
作者：
Katayama, T [1 ]
Aoyama, E [1 ]
Hirogaki, T [1 ]
Andoh, H [1 ]
Enoki, S [1 ]
Nakajima, M [1 ]
机构：
[1] Doshisha Univ, Fac Engn, Kyoto, Japan
来源：
PROCEEDINGS OF ISMA 2002: INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING, VOLS 1-5 | 2002年
关键词：
D O I：
暂无
中图分类号：
O42 [声学];
学科分类号：
070206 ; 082403 ;
摘要：
The purpose of this study is a purpose to construct the cab model of the construction machinery that design engineer is able to carry out the dynamic analysis, especially frequency response analysis, in conceptual design stage easily. As a previous step of the frequency response analysis for the cab model, evaluation method of damping ratio for spot-welded frame was suggested in this paper. First, the impulse excitation experiments for three types of test pieces, flat type, hat type, and spot-welded frame, were carried out to investigate the difference of those damping ratios. Next, it was considered that damping was mainly caused by friction of spot-welded points in the flange. Then, it was assumed that all of energy loss by friction damping was converted to the heating energy. Therefore damping ratio could be identified by measuring the temperature difference by using the thermography, as single degree of freedom for a spot pitch. As a result, it was clarified that damping ratio for spot-welded frame was dependent on frequency and acceleration.
引用
收藏
页码：2291 / 2298
页数：8
相关论文
共 50 条
  • [1] FE analysis to evaluate the damping ratio of spot-welded frame
    Enoki, S.
    Aoyama, E.
    Hirogaki, T.
    Andoh, H.
    Nakajima, M.
    Takimoto, Y.
    Katayama, T.
    Proceedings of ISMA 2004: International Conference on Noise and Vibration Engineering, Vols 1-8, 2005, : 1229 - 1234
  • [2] Characteristics of damping in components of a spot-welded frame
    Enoki, S
    Andou, H
    Takimoto, Y
    Katayama, T
    Computational Methods and Experimental Measurements XII, 2005, 41 : 559 - 568
  • [3] QUALITY EVALUATION OF MISSILE STRUCTURE SPOT-WELDED JOINTS
    HEFFAN, H
    MAUCH, JW
    SMITH, RC
    CUSICK, JH
    MATERIALS EVALUATION, 1967, 25 (01) : 15 - &
  • [4] A fatigue design method for spot-welded lap joints
    Bae, D
    Sohn, I
    Jung, W
    Song, SJ
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2002, 216 (D3) : 181 - 189
  • [5] QUALITY EVALUATION OF MISSILE STRUCTURE SPOT-WELDED JOINTS
    HEFFAN, H
    MAUCH, JW
    SMITH, RC
    CUSICK, JH
    MATERIALS EVALUATION, 1966, 24 (02) : 85 - &
  • [6] Optimization of spot-welded structures
    Zhang, Y
    Taylor, D
    FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2001, 37 (12) : 1013 - 1022
  • [7] An evaluation of simplified finite element models for spot-welded joints
    Xu, S
    Deng, X
    FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2004, 40 (9-10) : 1175 - 1194
  • [8] An optimization procedure for spot-welded structures based on SIMP method
    Long, Haiqiang
    Hu, Yumei
    Jin, Xiaoqing
    Yu, Huili
    Zhu, Hao
    COMPUTATIONAL MATERIALS SCIENCE, 2016, 117 : 602 - 607
  • [9] SPOT-WELDED MODEL OF CRACKED ROCK
    WHITE, JE
    GEOPHYSICS, 1980, 45 (04) : 535 - 535
  • [10] Spot-welded H-specimen
    Radaj, Dieter
    Giering, Axel
    Materialpruefung/Materials Testing, 1994, 36 (7-8): : 275 - 281
12345