Temperature fields during the development of autoignition in a rapid compression machine

被引:34
|
作者
Griffiths, JF [1 ]
MacNamara, JP
Mohamed, C
Whitaker, BJ
Pan, JF
Sheppard, CGW
机构
[1] Univ Leeds, Sch Chem, Leeds LS2 9JT, W Yorkshire, England
[2] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, W Yorkshire, England
来源
FARADAY DISCUSSIONS | 2001年 / 119卷
关键词
D O I
10.1039/b102002l
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Temperature and concentration fields have been investigated in the cylindrical combustion chamber of a rapid compression machine (RCM) by schlieren photography, chemiluminescent imaging and planar laser induced fluorescence of acetone and of formaldehyde in a 2-dimensional sheet across the diameter. The timescale of particular interest was up to 10 ms after the piston has stopped. Experiments were performed in non-reactive and reactive conditions. Acetone was seeded in non-reactive mixtures. Combustion was studied first in a system containing di-tert-butyl peroxide vapour in the presence of oxygen. The decomposition of di-tert-butyl peroxide generates methyl radicals, which are then oxidised if oxygen is present. The overall reaction is exothermic and is characteristic of a conventional thermal ignition. In addition, chemiluminescence, resulting from CH2O*, accompanies the oxidation process. The combustion of n-pentane was then investigated at compressed gas temperatures that spanned the range in which there is a negative temperature dependence of the overall reaction rate, typically 750-850 K. The response to thermal feedback in this more complex thermokinetic system can be the opposite of the "thermal runaway" that accompanies di-tert-butyl peroxide combustion. The purpose of making comparisons between these two types of systems was to show how the temperature field generated in the RCM is modified in different ways by the interaction with the chemistry and to discuss the implications of this for the spatial development of spontaneous ignition. As the piston of the RCM moves it shears gas off the walls of the chamber. This probably creates a roll-up vortex, but more importantly it also collects gas from the walls and moves it across the cylinder head pushing it forward into a plug at the centre. Thus, soon after the end of compression there is an adiabatically heated gas which extends virtually to the wall, but this incorporates a plug of colder gas at its core. Diffusive transport will occur, but the timescale is relatively slow, and the effect hardly shows until at least 10 ms post-compression. The consequence of "thermal runaway" on a timescale that is compatible with the development of this temperature field is that the reaction rate in the adiabatically compressed toroidal region accelerates faster than in the core, and goes to completion first. A somewhat similar pattern emerges during n-pentane combustion when the initial condition is set at the lower end of the negative temperature dependent range. By contrast, at adiabatically compressed gas temperatures close to the upper end of the negative temperature dependent region, the reaction rate in the cooler core develops faster than that in the surrounding zone, and the temperature difference is rapidly smoothed out. This does not lead to spatial homogeneity in all respects, however, because different rates and extents of reaction generate different concentrations of intermediates. This stratification has implications for the eventual spatial evolution of spontaneous ignition.
引用
收藏
页码:287 / 303
页数:17
相关论文
共 50 条
  • [31] Autoignition study of tetralin in a rapid compression machine at elevated pressures and low-to-intermediate temperatures
    Kukkadapu, Goutham
    Weber, Bryan W.
    Sung, Chih-Jen
    FUEL, 2015, 159 : 436 - 445
  • [32] Experimental and Kinetic Study of the Promoting Effect of Nitrogen Dioxide on Ethane Autoignition in a Rapid Compression Machine
    Deng Fuquan
    Zhao Ningbo
    Wu Yingtao
    Yang Jialong
    Tang Chenglong
    Li Zhiming
    Zheng Hongtao
    Huang Zuohua
    ENERGY & FUELS, 2020, 34 (06) : 7509 - 7521
  • [33] A Rapid Compression Machine Study of 2-Phenylethanol Autoignition at Low-To-Intermediate Temperatures
    Fang, Ruozhou
    Sung, Chih-Jen
    ENERGIES, 2021, 14 (22)
  • [34] Gas-phase autoignition of diesel/gasoline blends over wide temperature and pressure in heated shock tube and rapid compression machine
    Wang, Sixu
    Yu, Liang
    Wu, Zhiyong
    Mao, Yebing
    Li, Hua
    Qian, Yong
    Zhu, Lei
    Lu, Xingcai
    COMBUSTION AND FLAME, 2019, 201 : 264 - 275
  • [35] Effects of low temperature heat release on the aerodynamics of a flat piston rapid compression machine: Impact on velocity and temperature fields
    Ben Houidi, Moez
    Sotton, Julien
    Bellenoue, Marc
    Strozzi, Camille
    PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2019, 37 (04) : 4777 - 4785
  • [36] Experimental and Numerical Study of Autoignition/Deflagration Transition Limit in a Flat Piston Optical Rapid Compression Machine
    Ossman, Hicham
    Strozzi, Camille
    Sotton, Julien
    Bellenoue, Marc
    COMBUSTION SCIENCE AND TECHNOLOGY, 2023, 195 (07) : 1543 - 1572
  • [37] Influence of EGR and Syngas Components on the Autoignition of Natural Gas in a Rapid Compression Machine: A Detailed Experimental Study
    Yu, Y.
    Vanhove, G.
    Griffiths, J. F.
    De Ferrieres, S.
    Pauwelst, J. -F.
    ENERGY & FUELS, 2013, 27 (07) : 3988 - 3996
  • [38] A STUDY ON THE AUTOIGNITION CHARACTERISTICS OF GASOLINE-BIODIESEL BLENDED FUEL USING A RAPID COMPRESSION EXPANSION MACHINE
    Jwa, Kyeonghun
    Lee, JinWoo
    Lim, Ocktaeck
    PROCEEDINGS OF THE ASME INTERNAL COMBUSTION ENGINE FALL TECHNICAL CONFERENCE, 2019, 2020,
  • [39] Experiments and modeling of the autoignition of methyl pentanoate at low to intermediate temperatures and elevated pressures in a rapid compression machine
    Weber, Bryan W.
    Bunnell, Justin A.
    Kumar, Kamal
    Sung, Chih-Jen
    FUEL, 2018, 212 : 479 - 486
  • [40] Autoignition of n-Butanol/n-Heptane Blend Fuels in a Rapid Compression Machine under Low-to-Medium Temperature Ranges
    Yang, Zheng
    Qian, Yong
    Yang, Xin
    Wang, Yue
    Wang, Ya
    Huang, Zhen
    Lu, Xingcai
    ENERGY & FUELS, 2013, 27 (12) : 7800 - 7808