Measurement of In-Plane Shear Strength of Carbon/Carbon Composites by Compression of Double-Notched Specimens

被引：9
|
作者：
Yan, K. F. [1 ]
Zhang, C. Y. [1 ]
Qiao, S. R. [1 ]
Song, C. Z. [1 ]
Han, D. [1 ]
Li, M. [1 ]
机构：
[1] NW Polytech Univ, Natl Key Lab Thermostruct Composite Mat, Xian 710072, Shaanxi, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2012年 / 21卷 / 01期
基金：
美国国家科学基金会;
关键词：
carbon/carbon composites; double-notched specimen; in-plane shear strength; MATRIX COMPOSITE; C/C COMPOSITES; TENSILE;
D O I：
10.1007/s11665-010-9823-x
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The compression of a double-notched specimen was used to determine the in-plane shear strength (IPSS) of a carbon/carbon composite in the paper. The effects of the notch distance (L), thickness (T), and notch width (W) and supporting jig on the IPSS of the double-notched specimens were investigated numerically and experimentally. The fracture surfaces were examined by a scanning electron microscope. It was found that the IPSS varied with L. Thin specimen yielded low strength. W has little effect on IPSS. The main failure modes include the matrix shear cracking, delamination, fracture and pullout of fibers or fiber bundles. Meanwhile, a supporting jig can provide lateral support and prevent buckling, therefore lead to the failure in a shear mode.
引用
收藏
页码：62 / 68
页数：7
相关论文
共 50 条
  • [41] Damage monitoring of the double-notched carbon fiber reinforced polymers with surface bonded chirped fiber Bragg grating sensor
    Lu, Shaowei
    Zhang, Haijun
    Li, Zhaohua
    Wang, Jijie
    Zhongguo Jiguang/Chinese Journal of Lasers, 2012, 39 (11):
  • [42] Tension-compression anisotropy of in-plane elastic modulus for pyrolytic carbon
    Gross, Todd S.
    Nguyen, Khanh
    Buck, Michael
    Timoshchuk, Nikolay
    Tsukrou, Igor I.
    Reznik, Boris
    Piat, Romana
    Boehlke, Thomas
    CARBON, 2011, 49 (06) : 2145 - 2147
  • [43] In-plane shear characteristics during the forming of tufted carbon woven fabrics
    Shen, Hao
    Wang, Peng
    Legrand, Xavier
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2021, 141
  • [44] Investigations of in-plane shear properties of ±45°-carbon/epoxy composites using tensile testing and optical deformation analysis
    Gliesche, K
    Hübner, T
    Orawetz, H
    COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (02) : 163 - 171
  • [45] The effect of loading rate on the in-plane shear strength of tri-axial braided composites
    May, Michael
    Kilchert, Sebastian
    JOURNAL OF COMPOSITE MATERIALS, 2022, 56 (03) : 421 - 426
  • [46] Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending
    Turner, P.
    Liu, T.
    Zeng, X.
    COMPOSITE STRUCTURES, 2016, 142 : 286 - 297
  • [47] Analysis of the in-plane properties of hybrid glass/carbon woven fabric composites
    Stewart, RW
    Verijenko, VE
    Adali, S
    COMPOSITE STRUCTURES, 1997, 39 (3-4) : 319 - 328
  • [48] Correlation among crystalline morphology of PEEK, interface bond strength, and in-plane mechanical properties of carbon/PEEK composites
    Gao, SL
    Kim, JK
    JOURNAL OF APPLIED POLYMER SCIENCE, 2002, 84 (06) : 1155 - 1167
  • [49] Effect of Carbon Nanofibers on the Strain Rate and Interlaminar Shear Strength of Carbon/Epoxy Composites
    Santos, Paulo
    Silva, Abilio P.
    Reis, Paulo N. B.
    MATERIALS, 2023, 16 (12)
  • [50] Processing - Interlaminar Shear Strength Relationship of Carbon Fiber Composites Reinforced with Carbon Nanotubes
    Kim, Hansang
    COMPOSITES RESEARCH, 2011, 24 (05): : 34 - 38
12345