Measurement of In-Plane Shear Strength of Carbon/Carbon Composites by Compression of Double-Notched Specimens

被引：9
|
作者：
Yan, K. F. [1 ]
Zhang, C. Y. [1 ]
Qiao, S. R. [1 ]
Song, C. Z. [1 ]
Han, D. [1 ]
Li, M. [1 ]
机构：
[1] NW Polytech Univ, Natl Key Lab Thermostruct Composite Mat, Xian 710072, Shaanxi, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2012年 / 21卷 / 01期
基金：
美国国家科学基金会;
关键词：
carbon/carbon composites; double-notched specimen; in-plane shear strength; MATRIX COMPOSITE; C/C COMPOSITES; TENSILE;
D O I：
10.1007/s11665-010-9823-x
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The compression of a double-notched specimen was used to determine the in-plane shear strength (IPSS) of a carbon/carbon composite in the paper. The effects of the notch distance (L), thickness (T), and notch width (W) and supporting jig on the IPSS of the double-notched specimens were investigated numerically and experimentally. The fracture surfaces were examined by a scanning electron microscope. It was found that the IPSS varied with L. Thin specimen yielded low strength. W has little effect on IPSS. The main failure modes include the matrix shear cracking, delamination, fracture and pullout of fibers or fiber bundles. Meanwhile, a supporting jig can provide lateral support and prevent buckling, therefore lead to the failure in a shear mode.
引用
收藏
页码：62 / 68
页数：7
相关论文
共 50 条
  • [1] Measurement of In-Plane Shear Strength of Carbon/Carbon Composites by Compression of Double-Notched Specimens
    K. F. Yan
    C. Y. Zhang
    S. R. Qiao
    C. Z. Song
    D. Han
    M. Li
    Journal of Materials Engineering and Performance, 2012, 21 : 62 - 68
  • [2] Modified double-notched specimen for ultra-high temperatures shear-strength testing of carbon/carbon composites
    Xu, Chenghai
    Meng, Songhe
    Jin, Hua
    Han, Xinxing
    Xie, Weihua
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2019, 39 (15) : 4654 - 4663
  • [3] New ideas on the measurement of the in-plane shear strength of unidirectional composites
    Pierron, F
    Vautrin, A
    JOURNAL OF COMPOSITE MATERIALS, 1997, 31 (09) : 889 - 895
  • [4] In-plane shear strength of a carbon/carbon composite at different loading rates and temperatures
    Yan, K. F.
    Zhang, C. Y.
    Qiao, S. R.
    Han, D.
    Li, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03): : 1458 - 1462
  • [5] Bearing Strength of Carbon / Carbon Braided Composites Double Shear Joint
    Tang Y.
    Chen H.
    Zhou Z.
    Zhang Y.
    Guo Y.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2020, 56 (18): : 51 - 60
  • [6] Enhancement of the In-Plane Shear Properties of Carbon Fiber Composites Containing Carbon Nanotube Mats
    Kim, Hansang
    METALS AND MATERIALS INTERNATIONAL, 2015, 21 (01) : 185 - 193
  • [7] Enhancement of the in-plane shear properties of carbon fiber composites containing carbon nanotube mats
    Hansang Kim
    Metals and Materials International, 2015, 21 : 185 - 193
  • [8] Compression and in-plane shear testing of carbon-epoxy composites at subzero and elevated temperatures: Experiment and modeling
    Nema, Aditya
    Penumakala, Pavan Kumar
    Mallineni, Chandra Babu
    Adusumalli, Ramesh
    Tejasvi, K.
    Buragohain, Manoj Kumar
    POLYMER COMPOSITES, 2025,
  • [9] Progressive Failure Analysis of Scaled Double-Notched Carbon/Epoxy Composite Laminates
    Pham, D. C.
    Sun, X. S.
    Tan, V. B. C.
    Chen, B.
    Tay, T. E.
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2012, 21 (08) : 1154 - 1185
  • [10] Effect of thickness on the compression residual strength of notched carbon fiber/epoxy composites
    Ward, SH
    Razi, H
    TECHNOLOGY TRANSFER IN A GLOBAL COMMUNITY, 1996, 28 : 177 - 188
12345