Performance characteristics of the direct spray oil cooling system for a driving motor of an electric vehicle

被引：33
|
作者：
Garud, Kunal Sandip [1 ]
Hwang, Seong-Guk [1 ]
Han, Jeong-Woo [1 ]
Lee, Moo-Yeon [1 ]
机构：
[1] Dong A Univ, Dept Mech Engn, 37 Nakdong Daero 550, Busan, South Korea
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2022年 / 196卷
关键词：
Direct spray oil cooling system; Heat transfer coefficient; Nusselt number; Spray resistance; Spray power consumption; Electric vehicle driving motor; HEAT-TRANSFER PERFORMANCE; NUMERICAL-SIMULATION; NOZZLE; INCLINATION; ATOMIZATION;
D O I：
10.1016/j.ijheatmasstransfer.2022.123228
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In the present work, the performance characteristics of direct spray oil cooling system with spiral, and two full cone nozzles and three cooling oils of mineral oil, dielectric oil and transmission oil are ex-perimentally investigated. The temperature, temperature uniformity, injection pressure, spray resistance, heat transfer coefficient, Nusselt number and spray power consumption are evaluated as the performance characteristics of direct spray oil cooling system. The influences of heating capacities of 1.3 kW and 2.6 kW, nozzle to heating surface distances of 3 cm, 5 cm and 8 cm and cooling oil flow rates of 2 LPM, 3 LPM and 4 LPM are studied on the performance characteristics of direct spray oil cooling system. The lowest maximum surface temperature is obtained for spiral nozzle with 5 cm distance and both full cone nozzles with 8 cm distance. The maximum temperature is maintained within 140 & DEG;C at low heating ca-pacity of 1.3 kW and different combinations of nozzles and cooling oils are tested considering flow rate range of 2 LPM to 4 LPM to maintain the maximum temperature within cut-off limit of 200 & DEG;C at high heating capacity of 2.6 kW. The maximum performance characteristics are obtained at 4 LPM flow rate followed by 3 LPM and 2 LPM flow rates, respectively in decreasing order. The dielectric oil shows supe-rior performance characteristics compared to mineral oil and transmission oil for all nozzles. Furthermore, in each case of cooling oil, the performance characteristics are excellent for full cone-1 nozzle compared to spiral and full cone-2 nozzles. The combination of dielectric oil and full cone-1 nozzle shows superior performance characteristics of direct spray oil cooling system with heat transfer coefficient of 67420.20 W/m2-K, Nusselt number of 2385.64, spray resistance of 0.0132 K/W and spray power consumption of 29.73 W. The data base generated for a direct spray oil cooling system will be implemented for cooling of an electric vehicle driving motor.(c) 2022 Elsevier Ltd. All rights reserved.
引用
收藏
页数：19
相关论文
共 50 条
  • [31] Study on power performance of traction motor system for electric vehicle
    School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China
    Zhongguo Dianji Gongcheng Xuebao, 2006, 6 (136-140):
  • [32] Driving characteristics of anti-directional-twin-rotary motor on electric vehicle simulator
    Hoshi, N
    Yoshimoto, K
    Kawamura, A
    PROCEEDINGS OF THE POWER CONVERSION CONFERENCE - NAGAOKA 1997, VOLS I AND II, 1997, : 19 - 24
  • [33] A novel driving and control system for direct-wheel-driven electric vehicle
    Tao, GL
    Ma, ZY
    Zhou, LB
    Li, LG
    2004 12TH SYMPOSIUM ON ELECTROMAGNETIC LAUNCH TECHNOLOGY, 2004, : 514 - 517
  • [34] Performance optimization control of the fuel cells electric vehicle driving system
    Bo, YW
    Zhu, DQ
    Jiang, XJ
    POWERCON 2002: INTERNATIONAL CONFERENCE ON POWER SYSTEM TECHNOLOGY, VOLS 1-4, PROCEEDINGS, 2002, : 149 - 152
  • [35] Direct Yaw-Moment H∞ Control of Motor-Wheel Driving Electric Vehicle
    Yu, Houyu
    Huang, Miaohua
    Zhang, Zhenliang
    2013 9TH IEEE VEHICLE POWER AND PROPULSION CONFERENCE (VPPC), 2013, : 122 - 126
  • [36] Design of an oil-cooling-system of new energy vehicle drive motor
    Wan, Zhenping
    Dong, Liujie
    Wang, Xiaowu
    Duan, Jiachao
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2023, 237 (12) : 2810 - 2818
  • [37] Bearing Capacitance Estimation of Electric Vehicle Driving Motor
    Zhu, Xianhui
    Shi, Nan
    Li, Yidan
    Yang, Ying
    Wang, Xinrui
    2018 FIRST INTERNATIONAL CONFERENCE ON ENVIRONMENT PREVENTION AND POLLUTION CONTROL TECHNOLOGY (EPPCT 2018), 2018, 199
  • [38] Driving performance of anti-direction dual-rotor motor for electric vehicle
    Luo, Yu-Tao
    Kuang, Peng
    Liu, Yan-Wei
    Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2008, 36 (02): : 7 - 12
  • [39] Enhancing the cooling efficiency of the air cooling system for electric vehicle battery modules through liquid spray integration
    Dhuchakallaya, Isares
    Saechan, Patcharin
    JOURNAL OF ENERGY STORAGE, 2023, 72
  • [40] Torque Based Direct Driving Force Control Method with Driving Stiffness Estimation for Electric Vehicle with In-Wheel Motor
    Amada, Junya
    Fujimoto, Hiroshi
    38TH ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2012), 2012, : 4904 - 4909
12345