High-temperature stability of Ni-Sn intermetallic joints for power device packaging

In this study, the feasibility and high-temperature stability of Ni-Sn bonded joints fabricated by transient liquid phase sintering (TLPS) were investigated for high-temperature power electronics applications. A 30Ni-70Sn (wt%) TLPS paste was fabricated with micro-sized pure Ni and Sn powders, and chip bonding was performed on a direct bonded copper (DBC) substrate. During TLPS bonding, Sn particles melted and reacted with Ni particles, which resulting in the formation of stable Ni-Sn TLPS intermetallic joints. During aging treatments at 150 and 200 degrees C, the formed Ni3Sn4 phases were transformed into the Ni3Sn2. With increasing aging treatments, the reactions between Ni3Sn4 intermetallics and remaining Ni particles increased, which resulted in the formation of the Ni-rich Ni-Sn intermetallics. Even after 1000 h at an aging temperature of 200 degrees C, there is no significant difference in the stable and dense microstructure of Ni-Sn TLPS joints. In addition, their mechanical strengths did not vary significantly even after long-term treatment for 1000 h at 150 and 200 degrees C. This means that the Ni-Sn TLPS joints have a good long-term microstructural stability and mechanical reliability at high temperatures up to 200 degrees C. Therefore, we conclude that the Ni-Sn paste is a promising candidate as a die-attach material for high-temperature electronic assemblies. (C) 2021 Elsevier B.V. All rights reserved.