Miniature 120-beam coherent combiner with 3D-printed optics for multicore fiber-based endoscopy

被引：20
|
作者：
Sivankutty, Siddharth [1 ]
Bertoncini, Andrea [2 ]
Tsvirkun, Victor [1 ]
Kumar, Naveen Gajendra [3 ]
Brevalle, Gaelle [4 ]
Bouwmans, Geraud [4 ]
Andresen, Esben Ravn [4 ]
Liberale, Carlo [2 ,5 ]
Rigneault, Herve [1 ]
机构：
[1] Aix Marseille Univ, Inst Fresnel, Cent Marseille, CNRS, Marseille, France
[2] King Abdullah Univ Sci & Technol KAUST, Biol & Environm Sci & Engn, Thuwal, Saudi Arabia
[3] Aix Marseille Univ, Turing Ctr Living Syst, Inst Fresnel, CNRS,Cent Marseille, Marseille, France
[4] Univ Lille, Lab Phys Lasers Atomes & Mol, Lille, France
[5] King Abdullah Univ Sci & Technol KAUST, Comp Elect & Math Sci & Engn Div, Thuwal, Saudi Arabia
来源：
OPTICS LETTERS | 2021年 / 46卷 / 19期
基金：
美国国家卫生研究院;
关键词：
LENSLESS ENDOSCOPE;
D O I：
10.1364/OL.435063
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
In this Letter, we report a high-efficiency, miniaturized, ultra-fast coherent beam, combined with 3D-printed micro-optics directly on the tip of a multicore fiber bundle. The highly compact device footprint (180 mu m in diameter) facilitates its incorporation into a minimally invasive ultra-thin nonlinear endoscope to perform two-photon imaging. (C) 2021 Optical Society of America
引用
收藏
页码：4968 / 4971
页数：4
相关论文
共 50 条
  • [31] Fast bidirectional vector wave propagation method showcased on targeted noise reduction in imaging fiber bundles using 3D-printed micro optics
    Wende, Marco
    Drozella, Johannes
    Herkommer, Alois M.
    OPTICS EXPRESS, 2023, 31 (18) : 28874 - 28890
  • [32] A 3D-printed sensing element based on fiber Bragg grating technology for grasping force measurement in surgical forceps
    De Tommasi, Francesca
    Pulcinelli, Martina
    Massaroni, Carlo
    Gizzi, Alessio
    Silvestri, Sergio
    Schena, Emiliano
    Lo Presti, Daniela
    MEASUREMENT, 2025, 242
  • [33] A 120-GHz Wireless Link Using 3D-Printed Lens With Flexible Dielectric Fiber Feed and 28-nm CMOS Transceiver
    Ooms, Simon
    Reynaert, Patrick
    IEEE SOLID-STATE CIRCUITS LETTERS, 2020, 3 : 142 - 145
  • [34] Identification of Representative Equivalent Volumes on the Microstructure of 3D-Printed Fiber-Reinforced Thermoplastics Based on Statistical Characterization
    Dutra, Thiago Assis
    Ferreira, Rafael Thiago Luiz
    Resende, Hugo Borelli
    Oliveira, Luis Miguel
    Blinzler, Brina Jane
    Asp, Leif E.
    POLYMERS, 2022, 14 (05)
  • [35] Three-Point Bending Properties of 3D-Printed Continuous Carbon Fiber Reinforced Heterogeneous Composites Based on Fiber Content Gradients
    Dou, Hao
    Ye, Wenguang
    Zhang, Dinghua
    Wu, Chenhao
    Huang, Kuidong
    Sun, Tianyu
    Cheng, Yunyong
    ADVANCED ENGINEERING MATERIALS, 2022, 25 (01)
  • [36] Hollow-core antiresonant terahertz fiber-based TOPAS extruded from a 3D printer using a metal 3D printed nozzle
    WANVISA TALATAISONG
    JON GORECKI
    LIEKE D.VAN PUTTEN
    RAND ISMAEEL
    JAMES WILLIAMSON
    KATIE ADDINALL
    DANIEL SCHWENDEMANN
    MARTYNAS BERESNA
    VASILIS APOSTOLOPOULOS
    GILBERTO BRAMBILLA
    Photonics Research, 2021, (08) : 1513 - 1521
  • [37] Hollow-core antiresonant terahertz fiber-based TOPAS extruded from a 3D printer using a metal 3D printed nozzle
    Talataisong, Wanvisa
    Gorecki, Jon
    van Putten, Lieke D.
    Ismaeel, Rand
    Williamson, James
    Addinall, Katie
    Schwendemann, Daniel
    Beresna, Martynas
    Apostolopoulos, Vasilis
    Brambilla, Gilberto
    PHOTONICS RESEARCH, 2021, 9 (08) : 1513 - 1521
  • [38] Nested Horn-Based 3D-Printed Dual-Band High-Gain Conical Beam Antenna
    Wu, Li
    Wu, Sipei
    Zhang, Shuai
    Xue, Hui
    Qian, Boyang
    IET MICROWAVES ANTENNAS & PROPAGATION, 2025, 19 (01)
  • [39] Optical fiber Bragg grating (FBG)-based strain sensor embedded in different 3D-printed materials: A comparison of performance
    Alias, Mohamad Ashraff
    Ahmad, Harith
    Zaini, Muhammad Khairol Annuar
    Samion, Muhamad Zharif
    Sa'ad, Muhammad Syamil Mohd
    Sing, Lim Kok
    Grattan, Kenneth T. V.
    Rahman, B. M. Azizur
    Brambilla, Gilberto
    Reduan, Siti Aisyah
    Bayang, Leonard
    Ismail, Mohammad Faizal
    MEASUREMENT, 2024, 225
  • [40] 3D-printed carbon fiber/polyamide-based flexible honeycomb structural absorber for multifunctional broadband microwave absorption
    Gong, Ping
    Hao, Liang
    Li, Yan
    Li, Zheng
    Xiong, Wei
    CARBON, 2021, 185 : 272 - 281
12345