Meshing performance investigations of involute worm and helical gear drive based on counterpart rack

被引:6
|
作者
Lu, Binbin [1 ]
Chen, Yonghong [1 ]
Li, Shixuan [1 ]
Chen, Bingkui [1 ]
机构
[1] Chongqing Univ, State Key Lab Mech Transmiss, Chongqing 400030, Peoples R China
基金
中国国家自然科学基金;
关键词
Assembly error; Counterpart rack; Helical gear; Involute worm; Tooth contact analysis; TOOTH CONTACT ANALYSIS; CYLINDRICAL WORM; MISALIGNMENTS; DESIGN;
D O I
10.1007/s12206-021-0725-7
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Due to the involute worm and helical gear drive is different from the parallel shaft helical gear drive and the worm drive, the plane meshing theory and the space enveloping principle cannot be directly applied for this worm drive when the meshing analysis is performed, there has been no good analysis method to accurately calculate the meshing situation. To satisfy the increasing requirements of low-noise and long-lifetime in the service robots and the modern intelligent house systems, especially the intelligent shading system in the modern intelligent house system, a novel meshing performance analysis method is proposed for the involute worm and helical gear drive based on the counterpart rack. By calculating the contact line between the counterpart rack and helical gear and the contact line between the counterpart rack and involute worm, we can get the contact point of involute worm and helical gear finally. This novel meshing performance analysis makes it possible to use the plane meshing theory and the space enveloping principle to analyze involute worm and helical gear drive. The meshing relationship between the involute worm and the counterpart rack, as well as the counterpart rack and the helical gear are presented, and the computational model of contact ratio and contact ellipse are obtained through the counterpart rack. The mathematic model for the instantaneous contact point and contacts trace of the worm drive with different assembly errors is established, and the meshing performances are investigated through the numerical analysis, simulation analysis and performance testing. The results show that this worm drive is insensitively to the assembly errors, and it is beneficial for reducing the vibration-noise and extending the service life. This theoretical research provides theoretical support for further optimizing the vibration and noise of involute worm and helical gear drive and improving the fatigue life.
引用
收藏
页码:3533 / 3548
页数:16
相关论文
共 50 条
  • [41] Meshing performance and error sensitivity of mismatched TI worm drive
    Ye, Xinxin
    Chen, Yonghong
    Dou, Chenyang
    Wang, Xinhua
    Luo, Wenjun
    Chen, Bingkui
    MECHANISM AND MACHINE THEORY, 2022, 171
  • [42] Study on ZI worm and helical gear drive with large transmission ratio
    Dong, Liyang
    Liu, Pingyi
    Wei, Wenjun
    Dong, Xuezhu
    Li, Haitao
    MECHANISM AND MACHINE THEORY, 2014, 74 : 299 - 309
  • [43] ACCURATE MODELLING AND TRANSIENT MESHING ANALYSIS OF INVOLUTE SPUR GEAR BASED ON THE PRINCIPLE OF GEAR SHAPING
    Zeng, Q. L.
    Wang, K.
    Zhang, X.
    INTERNATIONAL JOURNAL OF SIMULATION MODELLING, 2017, 16 (02) : 322 - 333
  • [44] Design and simulation of meshing of new type of worm-gear drive with localized contacts
    Seol, I
    Chung, S
    KSME INTERNATIONAL JOURNAL, 2000, 14 (04): : 408 - 417
  • [45] Design and simulation of meshing of new type of worm-gear drive with localized contacts
    Inhwan Seol
    Soonbae Chung
    KSME International Journal, 2000, 14 : 408 - 417
  • [46] Study on the gear-rack meshing dynamic performance based on a multi-body dynamic model of rack rail vehicle
    Shen, Longjiang
    Zhou, Zuobin
    Wu, Xingwen
    He, Shizhong
    Yang, Ningrui
    Luo, Yang
    ADVANCES IN MECHANICAL ENGINEERING, 2024, 16 (09)
  • [47] Face-gear drive with spur involute pinion: geometry, generation by a worm, stress analysis
    Litvin, FL
    Fuentes, A
    Zani, C
    Pontiggia, M
    Handschuh, RF
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2002, 191 (25-26) : 2785 - 2813
  • [48] Lubrication Performance of Helical Gear Pair Under Dynamic Load Based on Local Involute Profile
    Liu, Mingyong
    Qu, Yang
    Hu, Chenglong
    Deng, Enxi
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2022, 144 (02):
  • [49] Meshing theory of point-contact conical-envelope cylindrical worm-face worm gear drive
    Mu, Shibo
    Sun, Xingwei
    Dong, Zhixu
    Yang, Heran
    Liu, Yin
    Zhang, Weifeng
    Meng, Qingxiang
    Zhao, Yaping
    MECHANISM AND MACHINE THEORY, 2025, 205
  • [50] Computerized design, generation and simulation of meshing of a spiroid worm-gear drive with a ground double-crowned worm
    De Donno, M.
    Litvin, F.L.
    Journal of Mechanical Design, Transactions of the ASME, 1999, 121 (02): : 264 - 273