Calculation method for comprehensive damping of ball bearings based on multigrid method

Purpose As an important part of the rotor system, the damping coefficient of ball bearing has a great influence on the dynamic characteristics of the system. This study aims to propose a theoretical calculation method and an experimental test method to obtain the damping coefficient of ball bearing. Design/methodology/approach Based on Hertzian contact theory and elastohydrodynamic lubrication theory, the point contact oil film damping analysis model of ball bearing is established. The comprehensive damping calculation method considering external radial load, centrifugal force, ball spin, rotational speed and lubricating oil film is derived. The multigrid method is used to obtain the oil film pressure and thickness distribution in the contact zone. The variation trend of comprehensive damping with bearing radial load, rotational speed, oil film thickness and viscosity is analyzed. The test platform is designed and the influencing factors of damping are tested. Findings The validity of the model and reliability of the test device are verified by comparing the good consistency obtained in the work. The results show that the comprehensive damping of ball bearing increases with the increase of radial load and decreases with the increase of rotational speed. Originality/value At present, the existing bearing damping model can achieve approximate calculation of damping, but the factors considered in these models are not comprehensive enough. Besides, few studies exist regarding test platform of bearing damping, and a perfect test plan has not yet been formed. In this paper, the comprehensive damping calculation model of ball bearing is improved, and a complete experimental scheme is proposed to provide reference for the comprehensive damping theory and experimental research of bearing. Peer review The peer review history for this article is available at: