Study on low friction under low sliding velocity condition using PTFE material with copper particle as filler

被引：0
|
作者：
Kurachi, K. [1 ]
Itoigawa, F. [1 ]
Koyata, S. [2 ]
Yagishita, K. [2 ]
Nakamura, T. [1 ]
机构：
[1] Nagoya Inst Technol, Dept Elect & Mech Engn, Showa Ku, Gokiso Cho, Nagoya, Aichi, Japan
[2] JXTG Nippon Oil & Energy Corp, Cent Tech Res Lab, Naka Ku, 8 Chidori Cho, Yokohama, Kanagawa, Japan
来源：
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018 (ASIATRIB 2018) | 2018年
关键词：
Boundary lubrication; velocity dependency; PTFE material;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Lower friction of a slide guide-way under low sliding velocity condition is essential to improve the accuracy of machine tools. To fulfill this requirement, PTFE based composite material is used in combination with special lubricant for a slide guide-way. However, why lower friction is developed in this combination is poorly-understood. In this study, friction mechanism under low pressure sliding contact using the PTFE based composite material is experimentally investigated by changing materials and performing sliding friction test. As a result, it was found that contacting condition of copper particle make influences on maintaining velocity dependency under boundary lubrication condition.
引用
收藏
页码：311 / 312
页数：2
相关论文
共 50 条
  • [41] Note: Low sliding friction piezoelectric motor using motion of hula hoop
    Zhong, Jinfeng
    Ma, Yuting
    Yan, Xintao
    Song, Feifei
    Wang, Ce
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2018, 89 (12):
  • [42] DEVELOPMENT OF ELASTIC SLIDING BEARING ANALYSIS MODEL CONSIDERING DECREASE OF FRICTION COEFFICIENT AT LOW VELOCITY RANGE
    Sato D.
    Makihira K.
    Shegay A.
    Misu M.
    Inai S.
    Kuwa M.
    Kawamata T.
    Ishida T.
    Tokuno M.
    Maruo J.
    Journal of Structural and Construction Engineering, 2024, 89 (821): : 719 - 726
  • [43] MEASUREMENT OF ULTRASONIC VELOCITY IN LIQUID USING A MODIFIED ULTRASONIC CORRELATION SYSTEM UNDER LOW S/N CONDITION
    IMANO, K
    SANNOMIYA, T
    CHUBACHI, N
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1989, 28 : 173 - 175
  • [44] Adsorption of Copper and Iron Using Low Cost Material as Adsorbent
    Najim, Tariq S.
    Elais, Nazik J.
    Dawood, Alya A.
    E-JOURNAL OF CHEMISTRY, 2009, 6 (01) : 161 - 168
  • [45] Study on Velocity-Dependent Property of Friction in Boundary Lubrication under Low Contacting Pressure Condition (Part 2) - Consideration into Mechanism of Velocity-Dependent Property of Friction Lubricated with Oil Containing Alkyl Acid Phosphate
    Norihisa, Takashi
    Itoigawa, Fumihiro
    Nakamura, Takashi
    Ogawa, Takuya
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2008, 53 (10) : 689 - 696
  • [46] Influence of Particle Size of Explosive on Ignition Mechanism Under Low Velocity Impact
    Guo, Hongfu
    Zhang, Fan
    Zhao, Chengzhong
    Zhang, Zhao
    Yuan, Baohui
    PROPELLANTS EXPLOSIVES PYROTECHNICS, 2021, 46 (01) : 46 - 51
  • [47] On the wear and damage characteristics of rail material under low temperature environment condition
    Ma, L.
    Shi, L. B.
    Guo, J.
    Liu, Q. Y.
    Wang, W. J.
    WEAR, 2018, 394 : 149 - 158
  • [48] Study on the Critical Heat Flux Mechanism Model under the Condition of Low Velocity and Subcooled Boiling in the Narrow Channel
    Zhang, Ming
    Zhou, Tao
    Liu, Ping
    Ran, Ke
    Sheng, Cheng
    Huang, Yanping
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 3962 - +
  • [49] Modelling and Analysis of Material Behaviour under Normal and Oblique Low Velocity Impact
    Vishwas, M.
    Joladarashi, Sharnappa
    Kulkarni, S. M.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 6635 - 6644
  • [50] Study the effects of filler particle size and filler/asphalt ratio on the high and low temperature performance of asphalt mastics
    Xing, Baodong
    Fan, Weiyu
    Lv, Xiaobo
    Qian, Chengduo
    2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING, 2019, 493
12345