Study of (Nd, Sm)422 solid solution and its effect on the melt process of Nd123 bulk superconductors

被引：4
|
作者：
Yoshioka, J
Iida, K
Murakami, M
机构：
[1] ISTEC, Superconduct Res Lab, Morioka Lab, Morioka, Iwate 0200852, Japan
[2] ISTEC, Superconduct Res Lab, Tamachi Lab, Minato Ku, Morioka, Iwate 0200852, Japan
来源：
PHYSICA C | 2001年 / 354卷 / 1-4期
关键词：
Nd123; Nd422; Nd-Sm solid solution; transition temperature; critical current density;
D O I：
10.1016/S0921-4534(01)00140-X
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
We have studied the range of Nd-Sm solid solution in the (Nd1-x, Sm-x)(4-2y)Ba2+2yCu2-yOz, system in the Nd123 matrix. X-ray diffraction studies for the sintered (Nd1-x, Sm-x)(4-2y)Ba2+2yCu2-yOz powders in air showed that the samples were a single phase 422 in the range of x = 0-0.3, showing that Sm substituted on Nd site in Nd422. It was also found that Sm is soluble up to x = 0.3 in (Nd1-x, Sm-x)(3.6)Ba2.4Cu1.8Oz. We then fabricated Nd123/Nd422 bulk superconductors by melt processing, in which Nd123 powder is mixed with 20 mol% (Nd-0.8 Sm-0.2)(3.6)Ba2.4Cu1.8Oz and 1 wt.% CeO2. The sample exhibited high T-c of 97 K and sharp superconducting transition when melt-processed under controlled oxygen partial pressure (P-O2) of 0.01 atm. (C) 2001 Elsevier Science B.V. All. rights reserved.
引用
收藏
页码：401 / 405
页数：5
相关论文
共 36 条
  • [21] Fabrication process of orthorhombic untwinned Nd123 single crystal and its Jc-H property
    Oka, A
    Koyama, S
    Izumi, T
    Shiohara, Y
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1999, 63 (09) : 1113 - 1116
  • [22] Angular dependence of Jc for filamentary (Nd,Eu,Gd)123 superconductors prepared by a solution spinning method and oxygen controlled melt growth process
    Goto, T
    Iwata, K
    Watanabe, K
    PHYSICA C, 2001, 353 (3-4): : 302 - 306
  • [23] Solution of the α-Potential Mystery in the γ Process and Its Impact on the Nd/Sm Ratio in Meteorites
    Rauscher, Thomas
    PHYSICAL REVIEW LETTERS, 2013, 111 (06)
  • [24] Critical current density for melt-processed filamentary monolithic RE123 (RE = Nd, Sm, Eu, Gd) superconductors
    Goto, T
    Watanabe, K
    Ban, E
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2003, 388 : 409 - 410
  • [25] Analysis of indentation size effect (ISE) behavior in low-load Vickers microhardness testing of (Sm123)1−x(Nd123)x superconductor system
    S. Celik
    O. Ozturk
    E. Coşkun
    M. Sarıhan
    E. Asikuzun
    K. Ozturk
    C. Terzioglu
    Journal of Materials Science: Materials in Electronics, 2013, 24 : 2218 - 2227
  • [26] Effect of CeO2 and Pt doping on the microstructure of Nd-Sm123 bulk superconductor fabricated in air
    Yoshioka, J
    Iida, K
    Murakami, M
    SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2002, 15 (05): : 778 - 780
  • [27] Angular dependence of Jc for filamentary LRE-123 (LRE=Nd, Sm, Eu, Gd) superconductors prepared by solution spinning method
    Shinohara, T
    Goto, T
    Takeuchi, F
    Watanabe, K
    ADVANCES IN CRYOGENIC ENGINEERING, VOLS 48A AND B, 2002, 614 : 360 - 367
  • [28] Analysis of indentation size effect (ISE) behavior in low-load Vickers microhardness testing of (Sm123)1-x(Nd123)x superconductor system
    Celik, S.
    Ozturk, O.
    Coskun, E.
    Sarihan, M.
    Asikuzun, E.
    Ozturk, K.
    Terzioglu, C.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2013, 24 (07) : 2218 - 2227
  • [29] Effect of Ag addition on cold-seeded melt-growth of Gd-Ba-Cu-O superconductor using Nd123 seed crystal
    Nariki, S
    Sakai, N
    Inoue, K
    Murakami, A
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2003, 392 : 468 - 472
  • [30] Structure and formation mechanism of subgrains in melt-processed REBa2Cu3Oy (RE = Y, Nd, Sm) bulk superconductors
    Ogasawara, K
    Sakai, N
    Murakami, M
    PHYSICA C, 2000, 341 : 2429 - 2430
1234