OPERATIONAL MODAL ANALYSIS FOR ROTATING MACHINES: CHALLENGES AND SOLUTIONS

被引：0

作者：

Di Lorenzo, E. ^{[1
]}

Manzato, S. ^{[2
]}

Peeters, B. ^{[3
]}

Marulo, F. ^{[4
]}

Desmet, W. ^{[5
]}

机构：

[1] Siemens Ind Software NV, Interleuvenlaan 68, B-3000 Leuven, Belgium

[2] Siemens Ind Software NV, Struct, Interleuvenlaan 68, B-3000 Leuven, Belgium

[3] Siemens Ind Software NV, Struct & Environm, Interleuvenlaan 68, B-3000 Leuven, Belgium

[4] Univ Naples Federico II, Dept Ind Engn, Naples, Italy

[5] Katholieke Univ Leuven, Div PMA, Leuven, Belgium

来源：

7TH IOMAC: INTERNATIONAL OPERATIONAL MODAL ANALYSIS CONFERENCE | 2017年

关键词：

Order tracking; Operational Modal Analysis; Rotating machines; Gear test rig;

D O I：

暂无

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Operational Modal Analysis (OMA) is widely employed and became an industrial standard technique for identifying the modal parameters (i.e. resonance frequencies, damping ratios and mode shapes) of mechanical structures. Several hypothesis need to be verified in order to apply OMA. First of all the structure must be Linear Time Invariant (LTI), but this is not the case if several parts are moving with respect to each other. Secondly, the forces acting on the structure must be represented by white noise in the frequency range of interest. This is not valid anymore if periodical loads due to rotating elements are introduced in the system. The main scope of this paper is to fully understand and propose solutions to the challenges and the limitations occurring when applying classical OMA techniques in case of rotating machines.

引用

页码：106 / 109

页数：4

共 50 条

[21] Modal Strain Energy Approach Applied in an Uncertainty Propagation Analysis Dedicated to Rotating Machines
Goncalves, Daniel F.
da Costa, Tatiane N.
Borges, Romes A.
Ap Cavalini Jr, Aldemir
Steffen Jr, Valder
PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON ROTOR DYNAMICS - IFTOMM, VOL. 4, 2019, 63 : 475 - 485
[22] An application of operational modal analysis in modal filtering
Kurowski, Piotr
Mendrok, Krzysztof
Uhl, Tadeusz
9TH INTERNATIONAL CONFERENCE ON DAMAGE ASSESSMENT OF STRUCTURES (DAMAS 2011), 2011, 305
[23] AUTOMATED OPERATIONAL MODAL ANALYSIS ON AN OFFSHORE WIND TURBINE: CHALLENGES, RESULTS AND OPPORTUNITIES
Weijtjens, W.
De Sitter, G.
Devriendt, C.
Guillaume, P.
6TH IOMAC: INTERNATIONAL OPERATIONAL MODAL ANALYSIS CONFERENCE PROCEEDINGS, 2015, : 713 - 730
[24] Uncertainties on modal parameters by operational modal analysis
Viet Hung Vu
Thomas, Marc
MECHANICS & INDUSTRY, 2014, 15 (02) : 153 - 158
[25] Vibration Signal Evaluation Based on K-Means Clustering as a Pre-Stage of Operational Modal Analysis for Structural Health Monitoring of Rotating Machines
Dreher, Nathali Rolon
Storti, Gustavo Chaves
Machado, Tiago Henrique
ENERGIES, 2023, 16 (23)
[26] Experimental acoustic modal analysis of an automotive cabin: challenges and solutions
Accardo, G.
Chiariotti, P.
Cornelis, B.
El-Kafafy, M.
Peeters, B.
Janssens, K.
Martarelli, M.
PROCEEDINGS OF ISMA2016 INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING AND USD2016 INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS, 2016, : 3735 - 3748
[27] MODAL MASS IN CLASSICAL AND OPERATIONAL MODAL ANALYSIS
Aenlle, M.
Pelayo, F.
Brincker, R.
8TH IOMAC INTERNATIONAL OPERATIONAL MODAL ANALYSIS CONFERENCE, 2019, : 471 - 480
[28] Modes in operational modal analysis
Zhang, Yi-Min
Zhang, Shou-Yuan
Li, He
Wen, Bang-Chun
Zhendong yu Chongji/Journal of Vibration and Shock, 2009, 28 (01): : 64 - 67
[29] Bayesian Operational Modal Analysis
Au, S. K.
IDENTIFICATION METHODS FOR STRUCTURAL HEALTH MONITORING, 2016, 567 : 117 - 135
[30] Operational Modal Identification for Rotating Machinery under Environment Excitation
Li Q.
Chu F.
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2019, 55 (19): : 28 - 34

← 1 2 3 4 5 →