FABRICATION AND CHARACTERIZATION OF MULTIWALL CARBON NANOTUBE POLYLACTIDE FIBER COMPOSITES

被引：0
|
作者：
Tong, Lemuel K. W. [1 ]
Rizvi, Reza [1 ]
Biddiss, Elaine [1 ]
Naguib, Hani E. [1 ]
机构：
[1] Univ Toronto, Dept Mat Sci & Engn, Toronto, ON, Canada
来源：
PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, 2010, VOL 2 | 2010年
关键词：
NANOCOMPOSITES; POLYMER;
D O I：
暂无
中图分类号：
TP18 [人工智能理论];
学科分类号：
081104 ; 0812 ; 0835 ; 1405 ;
摘要：
An extrusion melt fiber spinner is proposed for the fabrication of Multiwall Carbon Nanotube (MWNT) Polylactide (PLA) fiber composites. The melt fiber drawing system includes only feed rollers and a draw roller to allow the investigation of as-spun properties of the PLA fibers without the conventional heat treatment. The influence of the drawing parameters on the fiber quality is characterized by measuring the fiber diameters and draw ratios. Preliminary studies demonstrate that orientation and dispersion of MWNTs is feasible with this melt spinner design with improvements on the mechanical and thermal properties. Differential scanning calorimetry (DSC) results show an increase in the rate of cold-crystallization with increasing MWNT loading and tensile tests show that there is an optimal Young's modulus for 0.5 wt% MWNT loading.
引用
收藏
页码：129 / 135
页数：7
相关论文
共 50 条
  • [31] Fabrication and characterization of carbon nanotube reinforced magnesium matrix composites
    Mindivan, Harun
    Efe, Arife
    Kosatepe, A. Hadi
    Kayali, E. Sabri
    APPLIED SURFACE SCIENCE, 2014, 318 : 234 - 243
  • [32] Characterization and preparation of new multiwall carbon nanotube/conducting polymer composites by in situ polymerization
    Showkat, Ali Md
    Lee, Kwang-Pill
    Gopalan, Anantha Iyengar
    Kim, Sang-Ho
    Choi, Seong-Ho
    Sohn, Sang-Ho
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 101 (06) : 3721 - 3729
  • [33] Characterization and preparation of new multiwall carbon nanotube/conducting polymer composites by in situ polymerization
    Md Showkat, Ali
    Lee, Kwang-Pill
    Gopalan, Anantha Iyengar
    Kim, Sang-Ho
    Choi, Seong-Ho
    Sohn, Sang-Ho
    Journal of Applied Polymer Science, 2006, 101 (06): : 3721 - 3729
  • [34] Carbon nanotube functionalization effects on thermal properties of multiwall carbon nanotube/polycarbonate composites
    El-Brolossy, Tarek A.
    Ibrahim, Sobhy S.
    Alkhudhayr, Eman A.
    POLYMER COMPOSITES, 2015, 36 (07) : 1242 - 1248
  • [35] Molecular modeling of the mechanical behavior of carbon fiber-amine functionalized multiwall carbon nanotube/epoxy composites
    Sharma, Kamal
    Shukla, Mukul
    NEW CARBON MATERIALS, 2014, 29 (02) : 132 - 142
  • [36] Fabrication and Supercapacitor Applications of Multiwall Carbon Nanotube Thin Films
    Jiang, Kyle
    Gerhardt, Rosario A.
    C-JOURNAL OF CARBON RESEARCH, 2021, 7 (04):
  • [37] Fabrication and Characterization of Aluminum-Carbon Nanotube Powder and Polycarbonate/Aluminum-Carbon Nanotube Composites
    Hwang, San Ha
    Bang, Dae-Suk
    Yoon, Kwan Han
    Park, Young-Bin
    Lee, Dae-Yeol
    Jeong, Sung-Sil
    JOURNAL OF COMPOSITE MATERIALS, 2010, 44 (23) : 2711 - 2722
  • [38] MECHANICAL PROPERTIES OF MULTIWALL CARBON NANOTUBE-EPOXY COMPOSITES
    Vajaiac, E.
    Palade, S.
    Pantazi, A.
    Stefan, A.
    Pelin, G.
    Baran, D.
    Ban, C.
    Purica, M.
    Meltzer, V.
    Pincu, E.
    Berbecaru, C.
    Dragoman, D.
    DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES, 2015, 10 (02) : 359 - 369
  • [39] Multiwall carbon nanotube/epoxy composites produced by a masterbatch process
    M. H. G. Wichmann
    J. Sumfleth
    B. Fiedler
    F. H. Gojny
    K. Schulte
    Mechanics of Composite Materials, 2006, 42 : 395 - 406
  • [40] Multiwall carbon nanotube/epoxy composites produced by a masterbatch process
    Wichmann, M. H. G.
    Sumfleth, J.
    Fiedler, B.
    Gojny, F. H.
    Schulte, K.
    MECHANICS OF COMPOSITE MATERIALS, 2006, 42 (05) : 395 - 406
12345