Sintering Behaviour and Mechanical Properties of Al-Cu-Mg-Si-Sn Aluminum Alloy

被引：15
|
作者：
Padmavathi, C. [1 ]
Upadhyaya, Anish [1 ]
机构：
[1] Indian Inst Technol, Dept Mat Sci & Engn, Kanpur 208016, Uttar Pradesh, India
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2011年 / 64卷 / 4-5期
关键词：
Aluminum alloys; Powder metallurgy; Sintering; Microstructure; Mechanical properties; PARTICLE-SIZE; COPPER ALLOYS; POWDER; ATMOSPHERE; MAGNESIUM; ADDITIONS; COMPACTS;
D O I：
10.1007/s12666-011-0089-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The present study investigates the effect of compaction pressure and sintering temperature on densification response and mechanical properties of the Al-3.8Cu-1Mg-0.8Si-0.3Sn (2712) alloy. The compacts were pressed at 200 and 400 MPa and sintered at temperatures ranging from 570-630A degrees C in vacuum (10(-6) Torr). The objective of the present work is to obtain an optimum sintering conditions for achieving higher sintered densities and mechanical properties. The effect of sintering temperature is evaluated by measuring the sintered density, densification parameter, microstructure, phase changes and mechanical properties. While a higher sintering temperature results in densification enhancement, it also leads to microstructural coarsening. Significant improvement in mechanical properties is obtained through age-hardening of sintered alloy under various ageing conditions (T4, T6 and T8).
引用
收藏
页码：345 / 357
页数：13
相关论文
共 50 条
  • [31] The Effect of Thixoforming Process on The Microstructures and Mechanical Properties of Al-Si-Cu-Mg Alloy
    Samat, Saziana
    Omar, Mohd Zaidi
    Mohamed, Intan Fadhlina
    Aziz, Ahmad Muhammad
    JURNAL KEJURUTERAAN, 2018, 1 (06): : 1 - 7
  • [32] Structure and Mechanical Properties of Al–Cu–Mg–Si Alloy Prepared by Selective Laser Melting
    I. G. Brodova
    A. N. Klenov
    I. G. Shirinkina
    E. B. Smirnov
    N. Yu. Orlova
    Physics of Metals and Metallography, 2021, 122 : 1220 - 1227
  • [33] Microstructural development and mechanical properties of interrupted aged Al-Mg-Si-Cu alloy
    Buha, J.
    Lumley, R. N.
    Crosky, A. G.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (10): : 3119 - 3130
  • [34] The effect of quenching rates on microstructure and mechanical properties of an Al-Si-Cu-Mg alloy
    Piao, Yi-Nan
    Jia, Hai-Long
    Zha, Min
    Ma, Pin-Kui
    Gao, Dan
    Yin, Chao-Ran
    Yang, Zhi-Zheng
    Wang, Hui-Yuan
    MATERIALS CHARACTERIZATION, 2023, 196
  • [35] Effect of temperature on the mechanical properties of Al-Si-Cu-Mg-Ni-Ce alloy
    Liu, H. Q.
    Pang, J. C.
    Wang, M.
    Li, S. X.
    Zhang, Z. F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 824
  • [36] Microstructural development and mechanical properties of interrupted aged Al-Mg-Si-Cu alloy
    J. Buha
    R. N. Lumley
    A. G. Crosky
    Metallurgical and Materials Transactions A, 2006, 37 : 3119 - 3130
  • [37] The Effect of Ce on the Microstructure, Superplasticity, and Mechanical Properties of Al-Mg-Si-Cu Alloy
    Mochugovskiy, Andrey G.
    Prosviryakov, Alexey S.
    Tabachkova, Nataliya Yu
    Mikhaylovskaya, Anastasia, V
    METALS, 2022, 12 (03)
  • [38] Effect of Cu on the Microstructure and Mechanical Properties of Diecast Al-Mg2Si-Mg Based Alloy
    Yan, Feng
    Ji, Shouxun
    Fan, Zhongyun
    Aluminium Alloys 2014 - ICAA14, 2014, 794-796 : 172 - 177
  • [39] Effect of Si on Phase Equilibria, Mechanical Properties and Tribological Behaviour of Al-Cu Alloy
    Jain, Sandeep
    Patel, Mahesh
    Kumar, Vinod
    Samal, Sumanta
    SILICON, 2023, 15 (04) : 1807 - 1820
  • [40] Effect of Si on Phase Equilibria, Mechanical Properties and Tribological Behaviour of Al-Cu Alloy
    Sandeep Jain
    Mahesh Patel
    Vinod Kumar
    Sumanta Samal
    Silicon, 2023, 15 : 1807 - 1820
12345