Microstructure and mechanical properties of in-situ laminated Nb/Nb5Si3 composites

被引：11
|
作者：
Yu, C. X. [1 ]
Zhao, X. J. [1 ]
Xiao, L. R. [1 ]
Cai, Z. Y. [1 ]
Zhang, B. [1 ]
Guo, L. [1 ]
机构：
[1] Cent S Univ, Sch Mat Sci & Engn, Changsha 410083, Hunan, Peoples R China
来源：
MATERIALS LETTERS | 2017年 / 209卷
基金：
中国国家自然科学基金;
关键词：
Laminates; Microstructure; Fracture toughness; Compressive strength; HIGH-TEMPERATURE STRENGTH; FRACTURE-TOUGHNESS; BEHAVIOR; ALLOYS; MO;
D O I：
10.1016/j.matlet.2017.08.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The in-situ laminated Nb/Nb5Si3 composite was prepared by spark plasma sintering. The microstructures and mechanical properties of the laminated Nb/Nb5Si3 composite were investigated in present work. It could be found that, alternant distribution microstructures of Nb-ss and Nb5Si3 layers were observed after sintering. The Nb/Nb5Si3 composite exhibited fracture toughness of 11.2 MPa.m(1/2), and the predicted fracture toughness was estimated by the Ashby model. Moreover, the deviation of the experimental value from the predicted value was discussed. In addition, the compressive strength of the in-situ laminated Nb/Nb5Si3 composite was measured at 1400 degrees C and compared with that of the unidirectionally solidified Nb-17.5Si alloy. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码：606 / 608
页数：3
相关论文
共 50 条
  • [21] Microstructure and Properties of Nb/Nb5Si3 Composites Strengthened with Multiwalled Carbon Nanotubes by SPS
    Long, Wenyuan
    Zeng, Xiaoshu
    Jia, Hongmei
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (04) : 983 - 991
  • [22] Effects of Mo, W and (Nb, Hf)C on creep rupture properties of Nbss/Nb5Si3 in-situ composites
    Tanaka, H
    Kim, WY
    Fujikura, M
    Tanaka, R
    Mishima, Y
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2003, 67 (08) : 385 - 390
  • [23] Processing, microstructure, and mechanical properties of (Nb)/Nb5Si3 two-phase alloys
    Yoshisato Kimura
    Yoshinao Mishima
    Hiroaki Yamaoka
    Nobuaki Sekido
    Metallurgical and Materials Transactions A, 2005, 36 : 483 - 488
  • [24] Processing, microstructure, and mechanical properties of (Nb)/Nb5Si3 two-phase alloys
    Kimura, Y
    Yamaoka, H
    Sekido, N
    Mishima, Y
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (03): : 483 - 488
  • [25] MECHANICAL-PROPERTIES AND MICROSTRUCTURE OF SPUTTER-DEPOSITED NB5SI3/NB MICROLAMINATES
    RAWAL, SP
    SWANSON, GM
    MOSHIER, WC
    JOURNAL OF MATERIALS RESEARCH, 1995, 10 (07) : 1721 - 1729
  • [26] Oxidation resistant silicide coatings for Nbss/Nb5Si3 in-situ composites
    Wang, YP
    Li, SS
    Zhou, CG
    Qu, SY
    Song, LG
    Han, YF
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 741 - 744
  • [27] Effects of Al Addition on the Microstructure and Properties of Nb/Nb5Si3 in situ Composites Fabricated via Spark Plasma Sintering
    龙文元
    YAO Junping
    FU Zhengyi
    Journal of Wuhan University of Technology(Materials Science), 2014, 29 (05) : 1036 - 1038
  • [28] Effects of Al Addition on the Microstructure and Properties of Nb/Nb5Si3 in situ Composites Fabricated via Spark Plasma Sintering
    Long Wenyuan
    Yao Junping
    Fu Zhengyi
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2014, 29 (05): : 1036 - 1038
  • [29] Microstructure and room temperature fracture toughness of Nbss/Nb5Si3 in situ composites
    Kim, WY
    Tanaka, H
    Kasama, A
    Hanada, S
    INTERMETALLICS, 2001, 9 (09) : 827 - 834
  • [30] Unidirectional solidification of a Nbss/Nb5Si3 in-situ composite
    Guo, XR
    Guan, P
    Ding, X
    Zhang, J
    Kusabiraki, K
    Fu, HZ
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 745 - 748
12345