Study on Low-Pressure Casting Technique and Mold Design of the Aluminum Wheel

被引：0

作者：

Wang, Jiaze ^{[1
,2
]}

Lu, Kaijie ^{[1
,2
]}

Zheng, Qingchun ^{[1
,2
]}

Ma, WenPeng ^{[1
,2
]}

Peng, Pai ^{[1
,2
]}

Chen, Cong ^{[1
,2
]}

Li, Jiehe ^{[1
,2
]}

Li, Peixin ^{[1
,2
]}

Zheng, Dawei ^{[1
,2
]}

机构：

[1] Tianjin Univ Technol, Tianjin Key Lab Adv Mechatron Syst Design & Intel, Sch Mech Engn, Tianjin 300384, Peoples R China

[2] Tianjin Univ Technol, Natl Demonstrat Ctr Expt Mech & Elect Engn Educ, 391 Binshui West Rd, Tianjin, Peoples R China

来源：

2019 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION (ICMA) | 2019年

关键词：

Low-pressure casting; Response surface methodology; Optimization design; Center composite design; Multi-objective Optimization Problem; ALLOY WHEELS; DEFECTS;

D O I：

10.1109/icma.2019.8816222

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

It is necessary to optimize the die structure for the low-pressure casting of aluminum alloy wheel hub which is prone to shrinkage cavity and porosity. This paper simulated the mold filling and solidification process when the change of the temperature field and stress field, based on the solidification mold defect factors in central composite experiment and response surface analysis to optimize method, finally complete the multi-objective optimization using the algorithm of the NSGA-II reasonably come to the abrasive wall thickness values. In terms of experimental verification, the phase structure of aluminum alloy casting was observed to be uniform and smooth without shrinkage cavity and porosity, which realized the lightweight design of the die and improved the quality of the die casting.

引用

页码：1242 / 1247

页数：6

共 50 条

[21] Casting Defects in Low-Pressure Die-Cast Aluminum Alloy Wheels
Zhang, B.
Cockcroft, S. L.
Maijer, D. M.
Zhu, J. D.
Phillion, A. B.
JOM, 2005, 57 (11) : 36 - 43
[22] Casting defects in low-pressure die-cast aluminum alloy wheels
B. Zhang
S. L. Cockcroft
D. M. Maijer
J. D. Zhu
A. B. Phillion
JOM, 2005, 57 : 36 - 43
[23] LOW-PRESSURE DIE-CASTING
PALMER, J
HOWARD, P
STROWBRIDGE, M
ENGINEERING, 1981, 221 (04): : R1 - R7
[24] LOW-PRESSURE DIE-CASTING
HARTLEY, J
ENGINEERING MATERIALS AND DESIGN, 1975, 19 (07): : 21 - 22
[25] Low-Pressure Die Casting.
Wartey, G.G.
Giessereipraxis, 1973, (18): : 329 - 336
[26] Process optimization of A356 aluminum alloy wheel hub fabricated by low-pressure die casting with simulation and experimental coupling methods
Dong, Guojiang
Li, Shide
Ma, Shaozhong
Zhang, Dongsheng
Bi, Jiang
Wang, Ji
Starostenkov, Mikhail Dmitrievich
Xu, Zuo
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 3118 - 3132
[27] Manufacture of Aluminum Cylinder Heads by the Low Pressure Permanent Mold Casting Process.
Watanabe, Masatoshi
Goto, Shizuo
Takahashi, Tomayuki
Giesserei, 1974, 61 (03): : 58 - 63
[28] Measuring Mold Cavity Filling Time in Low Pressure Permanent Mold Casting of Aluminum A356 Parts
Chiesa, F.
Giguere, N.
Duchesne, B.
Baril, J.
TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 119, 2011, 119 : 141 - +
[29] Effects of Casting Design and Reduced Pressure on Mold Filling of Molten Aluminum Alloy in Expendable Pattern Casting Process
Koroyasu, Sadatoshi
MATERIALS TRANSACTIONS, 2014, 55 (12) : 1820 - 1826
[30] A case for low pressure sand casting of aluminum: Less common than gravity sand casting and low pressure permanent mold casting, low pressure sand molding holds a distinct combination of advantages for large aluminum castings
2016, American Foundry Society (18):

← 1 2 3 4 5 →