Inverse modelling and pulsating torque minimization of salient pole non-sinusoidal synchronous machines

被引：8
|
作者：
Ait-Gougam, Y.
Ibtiouen, R.
Touhami, O.
Louis, J. -P.
Gabsi, M.
机构：
[1] Laboratoire de Recherche en Electrotechnique, Ecole Nationale Polytechnique, El-Harrach 16200
[2] Systèmes et Applications des Technologies de l'Information et de l'Energie (SATIE), CNRS UMR 8029, Ecole Normale Supérieure de Cachan, 94235 Cachan Cedex
来源：
ELECTRIC POWER SYSTEMS RESEARCH | 2008年 / 78卷 / 01期
关键词：
D O I：
10.1016/j.epsr.2007.01.003
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Sinusoidal motor's mathematical models are usually obtained using classical d-q transformation in the case of salient pole synchronous motors having sinusoidal field distribution. In this paper, a new inverse modelling for synchronous motors is presented. This modelling is derived from the properties of constant torque curves in the Concordia's reference frame. It takes into account the non-sinusoidal field distribution; EMF, self and mutual inductances having non-sinusoidal variations with respect to the angular rotor position. Both copper losses and torque ripples are minimized by adapted currents waveforms calculated from this model. Experimental evaluation was carried out on a DSP-controlled PMSM drive platform. Test results obtained demonstrate the effectiveness of the proposed method in reducing torque ripple. © 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：88 / 96
页数：9
相关论文
共 50 条
  • [31] Extended DQ transformation for vectorial control applications of non-sinusoidal permanent magnet synchronous machines
    Oliveira, AA
    Monteiro, JRBD
    Aguiar, ML
    Gonzaga, DP
    2005 IEEE 36th Power Electronic Specialists Conference (PESC), Vols 1-3, 2005, : 1807 - 1812
  • [32] Modelling ventilation and cooling of the rotors of salient pole machines
    Pickering, SJ
    Lampard, D
    Shanel, M
    IEMDC 2001: IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE, 2001, : 806 - 808
  • [33] Torque ripple minimization in PMSM drive with non-sinusoidal back EMF using model predictive control
    Suchy, Ondrej
    Janous, Stepan
    Talla, Jakub
    Peroutka, Zdenek
    PROCEEDINGS OF THE 2020 19TH INTERNATIONAL CONFERENCE ON MECHATRONICS - MECHATRONIKA (ME), 2020, : 78 - 82
  • [34] Comparison of international and NEMA standards for salient pole synchronous machines
    Ghai, NK
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 1999, 14 (01) : 8 - 15
  • [35] APPRAISAL OF SATURATION IN SALIENT-POLE SYNCHRONOUS MACHINES.
    Abdel-Hamid, Radwan H.
    Morsi, M.F.
    Fahmi, M.A.
    Modelling, Measurement and Control A, 1987, 10 (04): : 17 - 28
  • [36] COMPUTER DESIGN SYNTHESIS OF SALIENT POLE SYNCHRONOUS MACHINES.
    Gascoigne, A.E.
    Institution of Engineers, Australia, Electrical Engineering Transactions, 1980, EE 16 (02): : 67 - 77
  • [37] EDDY CURRENTS IN SOLID PARTS OF SALIENT POLE SYNCHRONOUS MACHINES
    BOUILLAULT, F
    RAZEK, A
    REVUE DE PHYSIQUE APPLIQUEE, 1986, 21 (02): : 181 - 185
  • [38] RELUCTANCE DISTRIBUTION MODELING OF SATURATED SALIENT POLE SYNCHRONOUS MACHINES
    GORDON, C
    BARTON, TH
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 1994, 9 (02) : 323 - 329
  • [39] MODELING SATURATION OF LAMINATED SALIENT-POLE SYNCHRONOUS MACHINES
    ABDELHALIM, MA
    MANNING, CD
    IEE PROCEEDINGS-B ELECTRIC POWER APPLICATIONS, 1987, 134 (04): : 215 - 223
  • [40] On Saliency Enhancement of Salient Pole Wound Field Synchronous Machines
    Liu, Wenbo
    Lipo, Thomas A.
    2016 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2016,
12345