Effects of temperature and confining pressure on the mode I and mode II fracture toughness of cement mortar

被引：21
|
作者：
Ghanbari, Navid [1 ]
Hosseini, Mehdi [1 ]
Saghafiyazdi, Morteza [1 ]
机构：
[1] Imam Khomeini Int Univ, Qazvin 3414896818, Iran
来源：
THEORETICAL AND APPLIED FRACTURE MECHANICS | 2019年 / 104卷
关键词：
Confining pressure; Temperature; Cement mortar; Fracture toughness; Mode I; Mode II; STRAIN-BASED CRITERIA; CRACK-GROWTH;
D O I：
10.1016/j.tafmec.2019.102361
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effects of temperature and confining pressure were investigated on the mode I and mode II fracture toughnesses of Cracked Chevron-Notched Brazilian Disc (CCNBD) cement mortar specimens. The specimens were tested at ambient temperature (20 degrees C), as well as 60, 100 and 150 degrees C to study the effects of temperature. Furthermore, CCNBD cement mortar specimens were tested under 0, 3, 5, 7, and 10 MPa to investigate the effect of confining pressure on fracture toughness. Cement mortar specimens were used for testing in this study. According to the results, both mode I and mode II fracture toughnesses of the cement mortar increased linearly with increasing the confining pressure. Mode I and mode H fracture toughnesses initially increased by increasing the temperature up to 60 degrees C but then decreased as the temperature was elevated to the 100-150 degrees C range.
引用
收藏
页数：8
相关论文
共 50 条
  • [41] Specimen size effects on mode II fracture toughness of concrete
    Hu, S.
    Hu, L.
    MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 33 - 37
  • [42] Mode I and Mode II interlaminar fracture toughness of CFRP/magnesium alloys hybrid laminates
    Pan, Yingcai
    Wu, Guoqing
    Cheng, Xu
    Zhang, Zongke
    Li, Maoyuan
    Ji, Sudong
    Huang, Zheng
    COMPOSITE INTERFACES, 2016, 23 (05) : 453 - 465
  • [43] ON THE COMBINED MODE-I- MODE-II FRACTURE-TOUGHNESS OF POLYETHYLENE FILM
    MANOHARAN, M
    INTERNATIONAL JOURNAL OF FRACTURE, 1993, 62 (01) : R11 - R15
  • [44] Temperature Dependence and Fracture Criterion of Mixed Mode I/II Fracture Toughness of Phenolic Resin for Friction Material
    Araki, Wakako
    Shintaku, Hiroki
    Ohashi, Hiroyuki
    Horiuchi, Yoshiki
    Arai, Yoshio
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 121 (04) : 2301 - 2309
  • [45] Low temperature fracture resistance of cement emulsified asphalt mortar under mixed mode I/III loading
    Najjar, Shima
    Moghaddam, Abolfazl Mohammadzadeh
    Sahaf, Ali
    Aliha, M. R. M.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 110
  • [46] Mixed Mode I/II fracture toughness of 2034 aluminum alloys
    Kamat, SV
    Hirth, JP
    ACTA MATERIALIA, 1996, 44 (01) : 201 - 208
  • [47] Mode II fracture toughness of CFRP as a function of temperature and strain rate
    Machado, J. J. M.
    Marques, E. A. S.
    Campilho, R. D. S. G.
    da Silva, Lucas F. M.
    COMPOSITES PART B-ENGINEERING, 2017, 114 : 311 - 318
  • [48] Insight into the mode I and mode II fracture toughness of the cemented backfill-rock interface: Effect of time, temperature and sulphate
    Fang, Kun
    Fall, Mamadou
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 262
  • [49] Mode I and Mode II fracture toughness of densified Sitka spruce fabricated in an airtight atmosphere with high-temperature steam
    Yoshihara, Hiroshi
    Nobusue, Kyohei
    HOLZFORSCHUNG, 2008, 62 (01) : 82 - 85
  • [50] TEMPERATURE-DEPENDENCE OF MODE-II FRACTURE-TOUGHNESS
    TAKAMATSU, T
    ICHIKAWA, M
    JSME INTERNATIONAL JOURNAL SERIES I-SOLID MECHANICS STRENGTH OF MATERIALS, 1990, 33 (01): : 79 - 83
12345