Comparative study of combustion laws for Mo-Si-N and W-Si-N ternary systems

被引:7
|
作者
Gabrielyan, Armine V. [1 ]
Manukyan, Khachatur V. [1 ]
Kharatyan, Suren L. [1 ,2 ]
机构
[1] Yerevan State Univ, Dept Chem Phys, Yerevan, Armenia
[2] A Nalbandyan Inst Chem Phys NAS Armenia, Lab Kinet SHS Proc, Yerevan, Armenia
关键词
gas-solid reactions (preparation and processing); high-temperature alloys (phemomena); metals (types of material); chemical synthesis (preparation and processing);
D O I
10.1016/j.jallcom.2006.12.116
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Combustion laws in the Mo-Si-N and W-Si-N systems were studied. Thermodynamic analyses performed for these systems have shown that within certain intervals of parameters (the Si/Me ratio, nitrogen pressure, etc.), two-phase products consisting of MoSi2(WSi2) and Si3N4 are formed. Main factors influencing the combustion parameters, as well as phase composition and microstructure of products for both the systems considered were established experimentally. The leading stages of the combustion process in Mo(W)-Si-N systems (nitriding of silicon and/or siliconizing of the metal) de ending on experimental conditions were revealed. Optimum conditions for synthesizing MoSi2-Si3N4 Particulate composite containing 10 wt.% of silicon nitride were determined. (C) 2007 Elsevier B.V. All fights reserved.
引用
收藏
页码:394 / 399
页数:6
相关论文
共 50 条
  • [41] Structural and mechanical properties of amorphous W-Si-N sputtered films after thermal annealing
    Marques, AP
    Cavaleiro, A
    THIN SOLID FILMS, 2003, 441 (1-2) : 150 - 160
  • [42] Achievement of nanocrystalline structures after thermal annealing amorphous W-Si-N sputtered films
    Cavaleiro, A
    Marques, P
    NANOSTRUCTURES: SYNTHESIS, FUNCTIONAL PROPERTIES AND APPLICATIONS, 2003, 128 : 383 - 411
  • [43] Evolution of the microstructure, residual stresses, and mechanical properties of W-Si-N coatings after thermal annealing
    Cavaleiro, A
    Marques, AP
    Fernandes, JV
    Carvalho, NJM
    De Hosson, JT
    JOURNAL OF MATERIALS RESEARCH, 2005, 20 (05) : 1356 - 1368
  • [44] A comparative study of cavitation characteristics in Si3N4w/Al-Mg-Si composite and Si3N4w/Al-Mg-Si composite
    Iwasaki, H
    Mori, T
    Mabuchi, M
    Higashi, K
    TOWARDS INNOVATION IN SUPERPLASTICITY II, 1999, 304-3 : 681 - 686
  • [45] REACTIONS IN THE SYSTEMS MO-SI3N4 AND NI-SI3N4
    HEIKINHEIMO, E
    KODENTSOV, A
    VANBEEK, JA
    KLOMP, JT
    VANLOO, FJJ
    ACTA METALLURGICA ET MATERIALIA, 1992, 40 : S111 - S119
  • [46] Influence of N2 Gas Flow Ratio and Working Pressure on Amorphous Mo-Si-N Coating during Magnetron Sputtering
    Lim, Ki Seong
    Kim, Young Seok
    Hong, Sung Hwan
    Song, Gian
    Kim, Ki Buem
    COATINGS, 2020, 10 (01)
  • [47] Combustion synthesis in the Mo-Si-Al ternary system
    Bhaduri, SB
    Huang, JG
    Bhaduri, S
    22ND ANNUAL CONFERENCE ON COMPOSITES, ADVANCED CERAMICS, MATERIALS, AND STRUCTURES: A, 1998, 19 (03): : 405 - 412
  • [48] Surface morphology of sputter deposited W-Si-N composite coatings characterized by atomic force microscopy
    Fu, T
    Shen, YG
    Zhou, ZF
    Li, KY
    MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2005, 123 (02): : 158 - 162
  • [49] Effect of the substrate thermal expansion coefficient on the thermal residual stresses in W-Si-N sputtered films
    Louro, C
    Teixeira-Dias, F
    Menezes, LF
    Cavaleiro, A
    ADVANCED MATERIALS FORUM I, 2002, 230-2 : 513 - 516
  • [50] Mechanical behaviour of amorphous W-Si-N sputtered films after thermal annealing at increasing temperatures
    Louro, C
    Cavaleiro, A
    SURFACE & COATINGS TECHNOLOGY, 2000, 123 (2-3): : 192 - 198