Microstructures and tensile properties of commercial purity aluminium alloy AA1235 under different annealing conditions

被引：9
|
作者：
Roy, RK
Kar, S
Das, K
Das, S [1 ]
机构：
[1] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India
[2] Ohio State Univ, Dept Mat Sci & Engn, Columbus, OH 43210 USA
来源：
MATERIALS LETTERS | 2005年 / 59卷 / 19-20期
关键词：
commercially pure aluminium; electron microscopy; hardness; tensile properties; second phase particles; inverse pole figure;
D O I：
10.1016/j.matlet.2005.04.001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microstructures, hardness, tensile properties and texture of cold-rolled AA1235 alloy are investigated under different annealing conditions. Precipitation of Al3Fe particles occurs during annealing of the alloy. These precipitates largely affect the microstructural behaviour, tensile properties and texture of the alloy. After complete recrystallization no change in mechanical properties is observed upon further annealing. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：2418 / 2422
页数：5
相关论文
共 50 条
  • [31] Quality and Properties of the Friction Stir Welded AA2024-T4 Aluminium Alloy at Different Welding Conditions
    Aydin, Hakan
    MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION, 2010, 52 (09): : 640 - 650
  • [32] EFFECT OF ANNEALING TREATMENT ON THE STRUCTURE AND TENSILE AND CREEP PROPERTIES OF A COMMERCIAL TITANIUM ALLOY (4-PERCENT ALUMINIUM-4-PERCENT MANGANESE)
    MEAD, HW
    JOURNAL OF THE INSTITUTE OF METALS, 1959, 87 (10): : 343 - 346
  • [33] Fractography and Tensile Properties of AA6061 Aluminium Alloy/Rice Husk Ash Silicon Nanocomposite
    Udoye, N. E.
    Fayomi, O. S. I.
    Inegbenebor, A. O.
    INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING, 2020, 2020
  • [34] Microstructures and properties of biomedical TiNbZrFe β-titanium alloy under aging conditions
    Cui, W. F.
    Guo, A. H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 527 (1-2): : 258 - 262
  • [35] On anisotropic tensile mechanical behavior of Al-Cu-Li AA2198 alloy under different ageing conditions
    Examilioti, Theano N.
    Li, Wenya
    Kashaev, Nikolai
    Ventzke, Volker
    Klusemann, Benjamin
    Tiryakioglu, Murat
    Alexopoulos, Nikolaos D.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 895 - 908
  • [36] Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy
    Kumar, T. Senthil
    Balasubramanian, V.
    Sanavullah, M. Y.
    MATERIALS & DESIGN, 2007, 28 (07) : 2080 - 2092
  • [37] Effect of Preheating on Microstructure and Tensile Properties of Friction Stir Welded AA7075 Aluminium Alloy Joints
    Poongkundran, R.
    Senthilkumar, K.
    BRAZILIAN ARCHIVES OF BIOLOGY AND TECHNOLOGY, 2016, 59
  • [38] Effects of annealing temperature on microstructures and tensile properties of a single FCC phase CoCuMnNi high-entropy alloy
    Kim, Dong Geun
    Jo, Yong Hee
    Park, Jeong Min
    Choi, Won-Mi
    Kim, Hyoung Seop
    Lee, Byeong-Joo
    Sohn, Seok Su
    Lee, Sunghak
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 812
  • [39] STUDY ON TENSILE PROPERTIES AND MICROSTRUCTURES OF DIFFERENT SITES IN Al-Si ALLOY CASTING COMPONENT
    Tao, Jianquan
    Xiang, Lin
    Chen, Xidong
    Sun, Jipeng
    Wang, Yanbin
    Du, Chuanhang
    Peng, Feifei
    Gao, Shiqing
    Chen, Qiang
    ARCHIVES OF METALLURGY AND MATERIALS, 2023, 68 (02) : 585 - 589
  • [40] Microstructures and tensile properties of CuZrAlNb metallic glass composites under different cooling rates
    Liang, Weizhong
    Chen, Yongsheng
    Ning, Zhiliang
    Kang, Zhijie
    Sun, Haichao
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2018, 109 (08) : 723 - 728
12345