Stabilization of Journal Bearing Using Two-Layered Film Lubrication

被引:3
|
作者
Rao, T. V. V. L. N. [1 ]
机构
[1] Univ Teknol PETRONAS, Dept Mech Engn, Tronoh 31750, Perak Darul Rid, Malaysia
来源
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME | 2012年 / 134卷 / 01期
关键词
journal bearing; two-layered fluid film; stiffness and damping coefficients; threshold speed; critical whirl frequency ratio; FLUID FILM;
D O I
10.1115/1.4005650
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The purpose of this paper is to present the linearized stability analysis of two-layered fluid film in the journal bearing. In this work, a modified classical Reynolds equation is derived under dynamic conditions consisting of two layers of fluid film described by Newtonian viscosities. The magnitude of lubricant layer's film thickness and viscosities are taken into consideration. The Reynolds boundary conditions are used in the analysis of classical one-dimensional journal bearing to predict the stiffness and damping coefficients, threshold speed and critical whirl frequency ratio. The coefficients of load capacity, threshold speed, and critical whirl frequency ratio (C-w, C-omega, C-Omega) for two-layered film with reference to homogeneous film are computed as a function of the two parameters: (i) higher to lower dynamic viscosity ratio of two-layered fluid film (beta), and (ii) thickness ratio of fluid layer attached to journal and bearing (gamma). Higher threshold speed is obtained for thick high viscosity fluid film attached to the bearing surface and a thin low viscosity fluid film attached to the journal surface. [DOI: 10.1115/1.4005650]
引用
收藏
页数:5
相关论文
共 50 条
  • [41] THERMOELASTIC INFLUENCES IN JOURNAL BEARING LUBRICATION
    MORTON, PG
    KEOGH, PS
    GEC JOURNAL OF RESEARCH, 1986, 4 (03): : 181 - 193
  • [42] THERMOELASTIC INFLUENCES IN JOURNAL BEARING LUBRICATION
    MORTON, PG
    KEOGH, PS
    PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1986, 403 (1824) : 111 - 134
  • [43] On a mathematical model of journal bearing lubrication
    Lanzendoerfer, Martin
    Stebel, Jan
    MATHEMATICS AND COMPUTERS IN SIMULATION, 2011, 81 (11) : 2456 - 2470
  • [44] Analyzing the bearing capacity of shallow foundations on two-layered soil using two novel cosmology-based optimization techniques
    Gor, Mesut
    SMART STRUCTURES AND SYSTEMS, 2022, 29 (03) : 513 - 522
  • [45] Estimating Bearing Capacity of Strip Footings over Two-Layered Sandy Soils Using the Characteristic Lines Method
    Lotfizadeh, Mohammad Reza
    Kamalian, Mohsen
    INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, 2016, 14 (2B) : 107 - 116
  • [46] Temperature analysis of hydrodynamic journal bearing lubrication with a moving journal and a fixed bearing
    Sekhar, P. Sudam
    Dinesh, K.
    Patil, Pravin
    Dumka, Ankur
    Singh, Rajesh
    Kang, Amardeep Singh
    Oza, Ankit D.
    Kumar, Manoj
    Kumar, Abhishek
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024, 10 (04) : 3517 - 3530
  • [47] Thermovoltaic response in two-layered thin-film zinc oxide structures
    Makagonov, Vladimir A.
    Gabriel’s, Konstantin S.
    Kalinin, Yuri E.
    Lopatin, Artem Yu.
    Bliznyuk, Ludmila A.
    Fedotov, Alexander K.
    Modern Electronic Materials, 2024, 10 (03): : 159 - 165
  • [48] On the magnetoelectric effect in a two-layered film with a ferromagnetic Spin-Spin interaction
    Gareeva, Z. V.
    Doroshenko, R. A.
    Shul'ga, N. V.
    PHYSICS OF METALS AND METALLOGRAPHY, 2009, 107 (04): : 341 - 344
  • [49] Temperature analysis of hydrodynamic journal bearing lubrication with a moving journal and a fixed bearing
    Sekhar, P. Sudam
    Dinesh, K.
    Patil, Pravin
    Dumka, Ankur
    Singh, Rajesh
    Kang, Amardeep Singh
    Oza, Ankit D.
    Kumar, Manoj
    Kumar, Abhishek
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2023,
  • [50] Estimating Bearing Capacity of Strip Footings over Two-Layered Sandy Soils Using the Characteristic Lines Method
    Mohammad Reza Lotfizadeh
    Mohsen Kamalian
    International Journal of Civil Engineering, 2016, 14 : 107 - 116