3-D MULTIBODY MODELING OF A FLEXIBLE SURGICAL INSTRUMENT INSIDE AN ENDOSCOPE

被引:0
|
作者
Khatait, J. P. [1 ]
Brouwer, D. M. [1 ]
Meijaard, J. P. [1 ]
Aarts, R. G. K. M. [1 ]
Herder, J. L. [1 ]
机构
[1] Univ Twente, Fac Engn Technol, Mech Automat & Mechatron Fac Engn Technol, NL-7500 AE Enschede, Netherlands
关键词
SURGERY;
D O I
暂无
中图分类号
Q6 [生物物理学];
学科分类号
071011 ;
摘要
Modern surgical procedures involve flexible instruments for both diagnostic and therapeutic purposes. The implementation of flexible instruments in surgery necessitates high motion and force fidelity, and good controllability of the tip. However, the positional accuracy and the force transmission of these instruments are jeopardized by the friction and clearance inside the endoscope, and the compliance of the instrument. The objective of this paper is to set up a 3-D flexible multibody model for a surgical instrument inside an endoscope to study its translational and rotational behavior. The 3-D model incorporates all the deformations-axial, torsion, and bending-due to its interaction with the surroundings. The interaction due to the contact is defined along the normal and tangential direction at the contact point. The wall stiffness and damping are defined in the normal direction. Friction is defined along the tangential direction. The calculation of the interaction force and moment is explained with an example. Various simulations were performed to study the behavior of the instrument inside a curved rigid tube. The simulations for the insertion into a 3-D tube defined in a plane were compared for both 2-D and 3-D model. The simulation results from the 3-D model give the same results as the 2-D model. A simulation was carried out for the insertion in a 3-D tube using the 3-D model and the total interaction force on the instrument was analyzed. A 3-D multibody model was set up for the simulation of fine rotation. A motion hysteresis of 5 was observed for the chosen configuration. The 3-D multibody model is able to demonstrate the characteristic behavior of the flexible instrument under different scenarios. Both translational and rotational behavior of the instrument can be characterized for the given set of parameters. The developed model will help us to study the effect of various parameters on the motion and force transmission of the instrument.
引用
收藏
页码:271 / 280
页数:10
相关论文
共 50 条
  • [41] SPEEDY 3-D LASER MODELING
    KAPLAN, H
    PHOTONICS SPECTRA, 1994, 28 (08) : 46 - 46
  • [42] Modeling Cancer Mutations in 3-D
    Harper, Kristin
    CANCER DISCOVERY, 2017, 7 (08) : 787 - 788
  • [43] AFFORDABLE 3-D GRAPHIC MODELING
    STEVENS, T
    RIBA JOURNAL-ROYAL INSTITUTE OF BRITISH ARCHITECTS, 1982, 89 (06): : 77 - 77
  • [44] 3-D MODELING OF THE LEADZYME DOMAIN
    MAJOR, F
    FOURCRAULT, M
    CEDERGREN, R
    JOURNAL OF CELLULAR BIOCHEMISTRY, 1995, : 216 - 216
  • [45] BRINGING 3-D MODELING TO PCS
    YARES, E
    BYTE, 1995, 20 (01): : 201 - 203
  • [46] A SOLID FUTURE IN 3-D MODELING
    SENDLER, U
    ENGINEERING, 1992, 232 (09): : 16 - 16
  • [47] 3-D MODELING WITH EXPLORATION APPLICATIONS
    CARAZZONE, JJ
    ERIKSEN, EA
    GEOPHYSICS, 1982, 47 (04) : 482 - 483
  • [48] Face modeling and recognition in 3-d
    Medioni, G
    Waupotitsch, R
    IEEE INTERNATIONAL WORKSHOP ON ANALYSIS AND MODELING OF FACE AND GESTURES, 2003, : 232 - 233
  • [49] 3-D thermal modeling of FinFET
    Joshi, RV
    Pascual-Gutiérrez, JA
    Chuang, CT
    PROCEEDINGS OF ESSDERC 2005: 35TH EUROPEAN SOLID-STATE DEVICE RESEARCH CONFERENCE, 2005, : 77 - 80
  • [50] 3-D modeling of monolith reactors
    Jahn, R
    Snita, D
    Kubicek, M
    Marek, M
    CATALYSIS TODAY, 1997, 38 (01) : 39 - 46