Barium titanate ceramics prepared from conventional and microwave hydrothermal powders

被引：87
|
作者：
Liu, SF
Abothu, IR
Komarneni, S [1 ]
机构：
[1] Penn State Univ, Mat Res Lab, University Pk, PA 16802 USA
[2] Inst Mat Res & Engn, Singapore 119260, Singapore
来源：
MATERIALS LETTERS | 1999年 / 38卷 / 05期
关键词：
barium titanate; microwave-hydrothermal process; hydrothermal processing; relative permittivity; dissipation factor; electroceramic;
D O I：
10.1016/S0167-577X(98)00187-6
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microwave-hydrothermal (MH) synthesis of BaTiO3 was done at 138 degrees C with reaction time as low as 15 min, using Ba(NO3)(2), TiCl4 and KOH as starting chemicals. The resulting powder was pressed into pellets and sintered at different temperatures. BaTiO3 ceramics prepared by the above method resulted in a density of about 93% upon sintering at 1300 degrees C/2 h with larger grains and room temperature relative permittivity of 2000 at 1 kHz with a Curie temperature of 125 degrees C. The above properties were compared with samples of the same composition prepared by conventional hydrothermal (CH) method using the same starting solutions. (C) 1999 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：344 / 350
页数：7
相关论文
共 50 条
  • [31] Preparation of barium strontium titanate nano-powders by hydrothermal method
    Miao, Hong-Yan
    Zhou, Yao-Hui
    Zhu, Gang-Qiang
    Yadian Yu Shengguang/Piezoelectrics and Acoustooptics, 2006, 28 (04): : 446 - 448
  • [32] Synthesis of barium strontium titanate nanopowders by microwave hydrothermal method
    Chen, J.
    Che, M. C.
    Yan, F.
    ADVANCES IN APPLIED CERAMICS, 2015, 114 (06) : 344 - 349
  • [33] Microwave-hydrothermal synthesis of barium strontium titanate nanoparticles
    Simoes, A. Z.
    Moura, F.
    Onofre, T. B.
    Ramirez, M. A.
    Varela, J. A.
    Longo, E.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 508 (02) : 620 - 624
  • [34] Size effect in barium titanate powders synthesized by different hydrothermal methods
    Sun, Weian
    JOURNAL OF APPLIED PHYSICS, 2006, 100 (08)
  • [35] Effects of Initial Powder Size on the Densification of Barium Titanate Ceramics Prepared by Microwave-Assisted Sintering
    Yun, Han-Sol
    Kim, Hyo-Han
    Jeong, Dae-Yong
    Cho, Nam-Hee
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2015, 98 (04) : 1087 - 1094
  • [36] Microstructure and properties of barium titanate ceramics prepared by mechanochemical synthesis
    Miclea, C.
    Tanasoiu, C.
    Spanulescu, I.
    Miclea, C. F.
    Gheorghiu, A.
    Amarande, L.
    Cioangher, M.
    Miclea, C. T.
    ROMANIAN JOURNAL OF INFORMATION SCIENCE AND TECHNOLOGY, 2007, 10 (04): : 335 - 345
  • [37] PTCR-Ceramics Obtained Of Barium Titanate Powders With Different Crystallinity
    Shut, Victor N.
    Kostomarov, Sergey V.
    Gavrilov, Aleksey V.
    2006 15TH IEEE INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS, 2007, : 54 - 57
  • [38] Strontium Titanate Ceramics Obtained by Conventional and Microwave Methods
    Chaves, Andre Silva
    Berti, Thalita Goncalves
    Raponi, Olivia de Andrade
    Gelfuso, Maria Virginia
    Thomazini, Daniel
    20TH BRAZILIAN CONFERENCE ON MATERIALS SCIENCE AND ENGINEERING, 2014, 775-776 : 445 - 449
  • [39] Dielectric properties of lanthanum substituted barium titanate microwave ceramics
    Narang, Sukhleen Bindra
    Kaur, Dalveer
    Bahel, Shalini
    MATERIALS LETTERS, 2006, 60 (25-26) : 3179 - 3182
  • [40] Influence of hydrothermal conditions on ZST powders for microwave ceramics
    Bao, D. Y.
    Xiong, Z. X.
    HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 269 - +
12345