Modification in etching characteristics and surface topography of some electron irradiated polymers

被引：6
|
作者：
Mishra, R
Tripathy, SP
Dwivedi, KK
Khathing, DT
Ghosh, S
Müller, M
Fink, D
机构：
[1] Arunachal Univ, Itanagar 791111, Arunachal Prade, India
[2] Hahn Meitner Inst Kernforsch Berlin GmbH, D-14109 Berlin, Germany
[3] NE Hill Univ, Dept Phys, Shillong 793022, Meghalaya, India
来源：
RADIATION MEASUREMENTS | 2001年 / 34卷 / 1-6期
关键词：
activation energy of etching; bulk etch-rate; atomic force microscopy; surface roughness;
D O I：
10.1016/S1350-4487(01)00128-7
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
Track formation in polymers is a complex phenomenon in which not only primary but also secondary processes, such as formation of radicals and chemical processes, are involved. In the present work, the influence of 2 MeV electrons on the etching properties and the surface topography of polyethylene terephthalate (PET) and polyimide (PI) are studied. The increase in the bulk etch-rate and a decrease in the activation energy of etching were observed for both the polymers. The surface roughness of both polymers was reduced due to electron irradiation. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：95 / 98
页数：4
相关论文
共 50 条
  • [1] Modification of the Surface Topography and Composition of Ultrafine and Coarse Grained Titanium by Chemical Etching
    Nazarov, Denis V.
    Zemtsova, Elena G.
    Solokhin, Alexandr Yu.
    Valiev, Ruslan Z.
    Smirnov, Vladimir M.
    NANOMATERIALS, 2017, 7 (01):
  • [2] Optical and electrical properties of some electron and proton irradiated polymers
    Mishra, R
    Tripathy, SP
    Sinha, D
    Dwivedi, KK
    Ghosh, S
    Khathing, DT
    Müller, M
    Fink, D
    Chung, WH
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2000, 168 (01): : 59 - 64
  • [3] Proton dose-dependent modification in track etching response in some polymers
    Tripathy, SP
    Mishra, R
    Dwivedi, KK
    Khathing, DT
    Ghosh, S
    Fink, D
    RADIATION MEASUREMENTS, 2003, 36 (1-6) : 107 - 110
  • [4] Surface modification of Si-containing polymers during etching for bilayer lithography
    Eon, D
    de Poucques, L
    Peignon, MC
    Cardinaud, C
    Turban, G
    Tserepi, A
    Cordoyiannis, G
    Valamontes, ES
    Raptis, I
    Gogolides, E
    MICROELECTRONIC ENGINEERING, 2002, 61-2 : 901 - 906
  • [5] ELECTRON SPIN RESONANCE SPECTRA OF SOME GAMMA-IRRADIATED POLYMERS
    ABRAHAM, RJ
    WHIFFEN, DH
    TRANSACTIONS OF THE FARADAY SOCIETY, 1958, 54 (09): : 1291 - 1299
  • [6] SIMULATION OF SURFACE-TOPOGRAPHY EVOLUTION DURING PLASMA-ETCHING BY THE METHOD OF CHARACTERISTICS
    ARNOLD, JC
    SAWIN, HH
    DALVIE, M
    HAMAGUCHI, S
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1994, 12 (03): : 620 - 635
  • [7] PLASMA-ETCHING AND MODIFICATION OF ORGANIC POLYMERS
    EGITTO, FD
    PURE AND APPLIED CHEMISTRY, 1990, 62 (09) : 1699 - 1708
  • [8] Surface modification of recycled polymers in comparison to virgin polymers using Ar/O2 plasma etching
    Amberg, Martin
    Hohener, Marion
    Rupper, Patrick
    Hanselmann, Barbara
    Hufenus, Rudolf
    Lehner, Sandro
    Perret, Edith
    Hegemann, Dirk
    PLASMA PROCESSES AND POLYMERS, 2022, 19 (12)
  • [9] ELECTRON MICROSCOPE STUDIES ON THE ETCHING OF IRRADIATED GERMANIUM
    NOGGLE, TS
    STIEGLER, JO
    JOURNAL OF APPLIED PHYSICS, 1959, 30 (08) : 1279 - 1288
  • [10] Impact of Er,Cr:YSGG Laser, Sandblast, and Acid Etching Surface Modification on Surface Topography of Biodental Titanium Implants
    Abdulla, Mohammed A.
    Hasan, Radhwan H.
    Al-Hyani, Osama Hazim
    JOURNAL OF LASERS IN MEDICAL SCIENCES, 2023, 14
12345