Research on dynamic performance of coordinate measuring machines under various speed parameters

被引：0
|
作者：
Wang, HT [1 ]
Zhao, J [1 ]
Fei, YT [1 ]
Ma, XS [1 ]
机构：
[1] Hefei Univ Technol, Sch Instrumentat, Hefei 230009, Anhui, Peoples R China
来源：
ISTM/2005: 6th International Symposium on Test and Measurement, Vols 1-9, Conference Proceedings | 2005年
关键词：
coordinate measurement machines (CMMs); dynamic error; air bearing; probing system;
D O I：
暂无
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
Modern manufacturing technology has put forward more exacting demand of speed and accuracy on Coordinate Measuring Machines (CMMs). However, with the increase of speed, the dynamic accuracy will decrease since dynamic errors will have a great impact on the accuracy and act as a barrier to the measuring cycle time. In this paper, the influence of velocity parameters on dynamic performance of CMMs is studied. The main dynamic error sources of CMMs are identified and analyzed in detail. Different parameters, which influence the dynamic probe errors, are tested. Finally, a method for evaluating the positioning accuracy under different dynamic conditions using a laser interferometer is designed and analyzed.
引用
收藏
页码：9192 / 9196
页数：5
相关论文
共 50 条
  • [21] Research on optimal measurement area of flexible coordinate measuring machines
    Zheng, Dateng
    Du, Chengtao
    Hu, Yonggang
    MEASUREMENT, 2012, 45 (03) : 250 - 254
  • [22] PROPOSED STANDARD FOR PERFORMANCE EVALUATION OF COORDINATE MEASURING MACHINES.
    Anon
    American National Standards Institute, Standards, 1983,
  • [23] Application of fuzzy logic methodology for predicting dynamic measurement errors related to process parameters of coordinate measuring machines
    Bulutsuz, Asli G.
    Yetilmezsoy, Kaan
    Durakbasa, Numan
    JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, 2015, 29 (04) : 1619 - 1633
  • [24] Dynamic errors compensation of high-speed coordinate measuring machines using ANN-based predictive modeling
    Younes Echerfaoui
    Abderrazak El Ouafi
    Sasan Sattarpanah Karganroudi
    The International Journal of Advanced Manufacturing Technology, 2022, 122 : 2745 - 2759
  • [25] Dynamic errors compensation of high-speed coordinate measuring machines using ANN-based predictive modeling
    Echerfaoui, Younes
    El Ouafi, Abderrazak
    Karganroudi, Sasan Sattarpanah
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (5-6): : 2745 - 2759
  • [26] Dynamic errors compensation of high-speed coordinate measuring machines using ANN-based predictive modeling
    Echerfaoui, Younes
    El Ouafi, Abderrazak
    Sattarpanah Karganroudi, Sasan
    International Journal of Advanced Manufacturing Technology, 2022, 122 (5-6): : 2745 - 2759
  • [27] A COMPUTER-SIMULATION MODEL FOR STUDYING THE PERFORMANCE OF COORDINATE MEASURING MACHINES
    ELSHENNAWY, AK
    FORS, MN
    COMPUTERS & INDUSTRIAL ENGINEERING, 1987, 13 (1-4) : 262 - 266
  • [28] Evaluation of the performance of coordinate measuring machines in the industry, using calibrated artefacts
    Ferreira, Fernando A. M.
    de Vicente y Oliva, Jesus
    Sanchez Perez, Angel M.
    MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013), 2013, 63 : 659 - 668
  • [29] Dynamic error characteristics of touch trigger probes fitted to coordinate measuring machines
    Johnson, RP
    Yang, QP
    Butler, C
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 1998, 47 (05) : 1168 - 1172
  • [30] Dynamic error characteristics of touch trigger probes fitted to coordinate measuring machines
    Johnson, RP
    Yang, Q
    Butler, C
    WHERE INSTRUMENTATION IS GOING - CONFERENCE PROCEEDINGS, VOLS 1 AND 2, 1998, : 1104 - 1109
12345