Modelling of isothermal formation of pearlite and subsequent reaustenitisation in eutectoid steel during continuous heating

被引:10
|
作者
Caballero, FG
Capdevila, C
de Andrés, CG
机构
[1] CSIC, Ctr Nacl Invest Met, Dept Met Phys, Madrid 28040, Spain
[2] Univ Cambridge, Dept Mat Sci & Met, Cambridge CB2 3QZ, England
关键词
D O I
10.1179/026708301101510401
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Three different morphologies of pearlite have been formed isothermally at three different temperatures in a eutectoid steel. Moreover, the interlamellar spacing of the pearlite was calculated using the Zener and Hillert theoretical method. Experimental results suggest that the growth of pearlite is mainly controlled by volume diffusion of carbon in austenite, in the temperature range studied in this steel, In addition, a model that describes pearlite to austenite transformation during continuous heating in a eutectoid steel has been developed. The influence of structural parameters, such as interlamellar spacing and edge length of pearlite colonies, an the transformation kinetics has been experimentally studied and considered in the modeling. It has been found that the kinetics of pearlite to austenite transformation are slower the coarser the initial pearlite microstructure, Experimental validation of this model has been carried out and a good agreement (an accuracy level of higher than 90% in square correlation factor) between the experimental and calculated values has been found.
引用
收藏
页码:686 / 692
页数:7
相关论文
共 50 条
  • [41] ANALYSIS OF THE alpha yields gamma TRANSFORMATION IN EUTECTOID STEEL DURING INDUCTION HEATING.
    Chaloupecky, V.
    Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka Metallov), 1980, 22 (3-4): : 252 - 255
  • [43] Phase transformation and microstructure evolution of pearlite heat-resistant steel during heating
    Li, Yaqiang
    He, Yang
    Liu, Jianhua
    Cui, Heng
    Qiu, Shengtao
    Zhang, Pei
    Zheng, Guiyun
    MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (07) : 771 - 782
  • [44] Origin of abnormal formation of pearlite in medium-carbon steel under nonequilibrium conditions of heating
    Mirzaev, D. A.
    Yakovleva, I. L.
    Tereshchenko, N. A.
    Urtsev, V. N.
    Degtyarev, V. N.
    Shmakov, A. V.
    PHYSICS OF METALS AND METALLOGRAPHY, 2016, 117 (06): : 572 - 578
  • [45] Origin of abnormal formation of pearlite in medium-carbon steel under nonequilibrium conditions of heating
    D. A. Mirzaev
    I. L. Yakovleva
    N. A. Tereshchenko
    V. N. Urtsev
    V. N. Degtyarev
    A. V. Shmakov
    The Physics of Metals and Metallography, 2016, 117 : 572 - 578
  • [46] Reply to comments on kinetics model of isothermal pearlite formation in a 0.4C-1.6Mn steel
    Capdevila, C
    Caballero, FG
    de Andrés, CG
    SCRIPTA MATERIALIA, 2004, 50 (01) : 175 - 177
  • [47] Structure formation in grade 20 steel during equal-channel angular pressing and subsequent heating
    Dobatkin S.V.
    Odesskii P.D.
    Raab G.I.
    Tyutin M.R.
    Rybalchenko O.V.
    Russian Metallurgy (Metally), 2016, 2016 (11) : 1012 - 1020
  • [48] Effect of the Heating Rate on Austenite Formation Austenite formation during continuous heating on a grade X80 pipeline steel was studied
    Cesaro, A. Hintze
    Mendez, P. F.
    WELDING JOURNAL, 2021, 100 (10) : 338S - 347S
  • [49] THE MECHANISM OF AUSTENITE FORMATION DURING HEATING OF STEEL
    ZALKIN, VM
    METAL SCIENCE AND HEAT TREATMENT, 1987, 29 (1-2) : 26 - 31
  • [50] Formation of proeutectoid ferrite during dynamic transformation of undercooled austenite in a eutectoid steel
    State Key Laboratory for Advanced Metals and Materials, Beijing 100083, China
    不详
    Cailiao Rechuli Xuebao, 2008, 3 (45-48):