Evaluation of pozzolanic activity and physico-mechanical characteristics in ceramic powder-lime pastes

被引：36
|
作者：
Bakolas, A. [1 ]
Aggelakopoulou, E. [1 ]
Moropoulou, A. [1 ]
机构：
[1] Natl Tech Univ Athens, Sch Chem Engn, Sect Mat Sci & Engn, GR-15773 Athens, Greece
来源：
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY | 2008年 / 92卷 / 01期
关键词：
ceramic powder; hydrated lime; hydration phases; pozzolanic activity; thermal analysis;
D O I：
10.1007/s10973-007-8858-1
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Ceramic powder has been used as an artificial pozzolanic addition, in preparing pozzolanic mortars for the historic/traditional structures' construction. In order to evaluate the pozzolanic activity of ceramic powder, several pastes were prepared, by mixing it with hydrated time, in different ratios. The pastes were stored in standard conditions (RH=99 +/- 1%, T=25 +/- 1 degrees C) and evaluated using thermal analysis (DTA/TG), X-ray diffraction (XRD), compressive strength tests and mercury intrusion porosimetry (MIP), in time. The obtained results revealed that the compounds formed were CSH and C(4)ACH(11) (monocarboaluminate) after 270 days of curing. The calcium hydroxide consumption increases as the initial amount of the ceramic powder in the paste augments. The maximum strength development is obtained for ceramic powder/hydrated lime ratio 3:1.
引用
收藏
页码：345 / 351
页数：7
相关论文
共 50 条
  • [41] Physico-chemical and Thermal Characteristics of Lime-silica Fume Pastes
    E. El-Shimy
    S. A. Abo-El-Enein
    H. El-Didamony
    T. A. Osman
    Journal of Thermal Analysis and Calorimetry, 2000, 60 : 549 - 556
  • [42] Utilizing Marble Wastewater in Cement Pastes and Mortars for Enhanced Physico-Mechanical and Microstructural Properties
    Alrowais, Raid
    Shakeel, Khalid
    Bashir, Muhammad Tariq
    Sikandar, Muhammad Ali
    Khan, Md. Munir Hayet
    Ounais, Wassef
    BUILDINGS, 2024, 14 (08)
  • [43] Acoustic method of rejecting small ceramic samples for physico-mechanical tests
    Baranov, V.M.
    Kudryatsev, E.M.
    Russian Ultrasonics, 1988, 18 (06): : 349 - 352
  • [44] Physico-mechanical and Stability Evaluation of Carbamazepine Cocrystal with Nicotinamide
    Rahman, Ziyaur
    Agarabi, Cyrus
    Zidan, Ahmed S.
    Khan, Saeed R.
    Khan, Mansoor A.
    AAPS PHARMSCITECH, 2011, 12 (02): : 693 - 704
  • [45] Investigation of physico-mechanical properties of ceramic oxide kernels for nuclear applications
    Titov, MM
    Fachinger, J
    Bukaemskiy, AA
    JOURNAL OF NUCLEAR MATERIALS, 2004, 328 (01) : 21 - 30
  • [46] Physico-mechanical and Stability Evaluation of Carbamazepine Cocrystal with Nicotinamide
    Ziyaur Rahman
    Cyrus Agarabi
    Ahmed S. Zidan
    Saeed R. Khan
    Mansoor A. Khan
    AAPS PharmSciTech, 2011, 12 : 693 - 704
  • [47] Investigations on the influence of polytetrafluoroethylene powder as a filler on physico-mechanical and wear characteristics of nylon 66/graphite composites
    Basavaraj, E.
    Ramaraj, B.
    Siddaramaiah
    HIGH PERFORMANCE POLYMERS, 2012, 24 (07) : 616 - 624
  • [48] The Effect of Sodium and Magnesium Sulfate on Physico-Mechanical and Microstructural Properties of Kaolin and Ceramic Powder-Based Geopolymer Mortar
    Kaya, Mehmet
    Koksal, Fuat
    Nodehi, Mehrab
    Bayram, Muhammed
    Gencel, Osman
    Ozbakkaloglu, Togay
    SUSTAINABILITY, 2022, 14 (20)
  • [49] Influence of ultrasonic sound on physico-mechanical characteristics of titanium alloys
    Akushskaya, O. M.
    Papsheva, N. D.
    INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS 2017, 2018, 327
  • [50] Physico-mechanical, structural, and mineralogical analysis of composite concrete incorporating hydraulic lime and pozzolan
    Nassiri, O.
    Mahboub, I.
    Ibnoussina, M.
    Moukmir, O.
    El Amrani, A.
    Mazirh, K.
    Ammari, A.
    El Cheickine, I.
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 437
12345