INFLUENCE OF LUBRICANTS ON ADVANCED HIGH STRENGTH STEEL TUBES IN BENDING PROCESS

被引：0

作者：

Koganti, Ramakrishna ^{[1
]}

Angotti, Sergio ^{[1
]}

van Riemsdijk, Isadora

Nelson, Robert C.

Smith, Jill

机构：

[1] Ford Motor Co, Dearborn, MI 48121 USA

来源：

IMECE2009, VOL 4 | 2010年

关键词：

ALUMINUM EXTRUSION TUBES; AUTOMOTIVE APPLICATIONS; PART;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

To reach safety, emissions, and cost objectives, manufacturers of automotive body structural components shape thin gauge, high strength steel tube using a series of manufacturing steps that often include bending, preforming and hydroforming. Challenging grades and bend severity require a sensitive optimization of the tubular bending process. Lubricants play a significant role in establishing a successful bending process. In this study, the performance of two lubricants, Hydrodraw 551 and HFO 20, were investigated for bending Dual Phase 780 (DP780) and High Strength Low Alloy 350 (HSLA350) thin-walled steel tubes. Formability success was evaluated in terms of wrinkling, thinning strain and final geometry. Lubricant performance was found to be sensitive to grade and application site. HFO 20 was found to be a poor choice for bending DP780 tube.

引用

页码：51 / 56

页数：6

共 50 条

[21] Influence of Substrate Molybdenum on Galvannealing Kinetics of an Advanced High Strength Steel
Krishnardula, Venu Gopal
Cheng, Chann Chen
Bhattacharya, Debanshu
ISIJ INTERNATIONAL, 2014, 54 (08) : 1890 - 1897
[22] Methodology for the analysis of the process behaviour of advanced high strength steels in bending and shearing operations
Tsoupis, Ioannis
Hildering, Sven
Merklein, Marion
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2, 2012, 504-506 : 895 - 900
[23] Experimental Study on Failure Mechanism of Advanced High Strength Steels in Air Bending Process
Pornputsiri, N.
Kanlayasiri, K.
9TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MANUFACTURING (ICMM 2018), 2018, 361
[24] The influence of full and partial austenitization temperatures on the quench and partition heat treatment process for an advanced high strength steel
Kurup, V
Siyasiya, C. W.
Mostert, R. J.
Wicks, J.
CONFERENCE OF THE SOUTH AFRICAN ADVANCED MATERIALS INITIATIVE (COSAAMI-2018), 2018, 430
[25] Study on behavior and flexural capacity of high strength concrete filled steel tubes subjected to pure bending moment
Han, Linhai
Harbin Jianzhu Gongcheng Xueyuan Xuebao/Journal of Harbin University of Architecture Engineering, 1997, 30 (01): : 32 - 40
[26] Influence of galvannealed process on coating corrosion resistance of high strength IF steel
Xiaodong, H.
Binkai, C.
Wugang, Y.
Qifu, Z.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2008, 59 (10): : 825 - 830
[27] Effect of Clearance on Wrinkling of 21-6-9 High-strength Stainless Steel Tubes in Numerical Control Rotary Draw Bending Process
Cheng, Lu
Fang, Jun
Li, Yuan
Dai, Li
Xiong, Mengsi
Lu, Shiqiang
ADVANCES IN MATERIALS, MACHINERY, ELECTRONICS I, 2017, 1820
[28] Influence of Heat Treatment Process to the Fatigue Properties of High Strength Steel
Chmelko, V
Berta, I
Margetin, M.
MECHANICAL FATIGUE OF METALS: EXPERIMENTAL AND SIMULATION PERSPECTIVES, 2019, 7 : 35 - 40
[29] SPRING-BACK ANALYSIS OF THE VEE BENDING PROCESS FOR HIGH-STRENGTH STAINLESS STEEL
Rahdiana, Nana
Sukarman
Khoirudin
Abdulah, Amri
Shieddieque, Apang Djafar
JURNAL TEKNOLOGI-SCIENCES & ENGINEERING, 2023, 85 (03): : 135 - 144
[30] Optimization of die fillet in bending process of high strength steel sheet DP780
Dong W.
Wen J.
Xu L.
Lin Q.
Li L.
Lin, Qiquan (xtulqq@163.com), 2018, Central South University of Technology (49): : 2692 - 2699

← 1 2 3 4 5 →