Effect of winding direction on four-layer HTS power transmission cable

被引：8

作者：

Kim, SW ^{[1
]}

Joo, JH ^{[1
]}

Cho, J ^{[1
]}

Bae, JH ^{[1
]}

Kim, HJ ^{[1
]}

Seong, KC ^{[1
]}

机构：

[1] KERI, Chang Won 641600, South Korea

来源：

CRYOGENICS | 2003年 / 43卷 / 10-11期

关键词：

AC loss; current sharing; HTS power transmission cable; multi-layer; winding direction; winding pitch;

D O I：

10.1016/S0011-2275(03)00174-7

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A high temperature superconductor (HTS) power transmission cable is usually made of several layers of helically wound superconductor tapes. The current distribution among the conductor tapes is controlled mainly by pitches and winding directions of the layers, because the inductance of the layer is determined by the pitch and the winding direction. Two winding directions right and left-are possible for each layer, and we can list up many possible combinations of winding directions. If we choose a good combination we can find the optimal pitches and make an even current distribution. However, with a bad combination of the winding direction, it is almost impossible to find a solution. We developed a software code to calculate the currents of the layers. With this software we studied the effect of the winding direction on a four-layer cable by a statistical way. A brief description of the software, calculation results and discussions will be presented. (C) 2003 Elsevier Ltd. All rights reserved.

引用

页码：629 / 635

页数：7

共 50 条

[41] Development and demonstration of a long length HTS cable to operate in the Long Island Power Authority transmission grid
Maguire, JF
Schmidt, F
Hamber, F
Welsh, TE
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) : 1787 - 1792
[42] Design Study and Test Arrangement of HTS Transmission Line Power Cable for Fast Cycling Accelerator Magnets
Piekarz, Henryk
Blowers, Jamie
Hays, Steven
Huang, Yuenian
Shiltsev, Vladimir
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2010, 20 (03) : 1300 - 1303
[43] Numerical study on AC loss minimization of multi-layer tri-axial HTS cable for 3-phase AC power transmission
Fukui, Satoshi
Noguchi, Takeshi
Ogawa, Jun
Yamaguchi, Mitsugi
Sato, Takao
Tsukamoto, Osami
Takao, Tomoaki
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 1700 - 1703
[44] Design Optimization of Four-Layer Fraction Slot Concentrated Winding Spoke-Type Interior Permanent Magnetic Machine for Range Extender
Xiao, Congda
Yang, Can
SAE INTERNATIONAL JOURNAL OF ELECTRIFIED VEHICLES, 2023, 12 (03): : 403 - 412
[45] A functional module comparison of the interconnected mesh power system (IMPS) with a standard four-layer MCM topology
Glover, MD
Schaper, LW
1996 IEEE MULTI-CHIP MODULE CONFERENCE, PROCEEDINGS, 1996, : 143 - 146
[46] Moledeling and Analysis of the Power Transmission with an 110kV/3kA HTS Cable in a Meshed Grid
Zhu, Jiahui
Qiu, Ming
Lai, Xiaokang
Chen, Xiaoyu
Yuan, Weijia
2014 IEEE PES GENERAL MEETING - CONFERENCE & EXPOSITION, 2014,
[47] A signal-noise comparison of the Interconnected Mesh Power System (IMPS) with a standard four-layer MCM topology
Glover, MD
Parkerson, JP
Schaper, LW
1966 INTERNATIONAL CONFERENCE ON MULTICHIP MODULES, PROCEEDINGS, 1996, 2794 : 216 - 219
[48] Improved Four-Layer Winding Design for a 12-Slot 10-Pole Permanent Magnet Machine Using Unequal Tooth Coils
Tessarolo, Alberto
Mezzarobba, Mario
Barbini, Nicola
PROCEEDINGS OF THE IECON 2016 - 42ND ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2016, : 1686 - 1691
[49] The effective current and magnetic field distributions for reducing AC losses in coaxial multi-layer HTS transmission cable
Tsuda, M.
Fujisawa, T.
Hiraoka, T.
Harada, N.
Yagai, T.
Hamajima, T.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2006, 16 (02) : 1594 - 1597
[50] Effect of inserted HTS power transmission cables on friction loss in corrugated pipes
Zuo, Z. Q.
Jiang, W. B.
Yu, Z. G.
Huang, Y. H.
27TH INTERNATIONAL CRYOGENICS ENGINEERING CONFERENCE AND INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE 2018 (ICEC-ICMC 2018), 2019, 502

← 1 2 3 4 5 →