Fabrication of alumina-based toughened nanocomposites

被引：15
|
作者：
Matsunaga, T [1 ]
Leela-Adisorn, U [1 ]
Kobayashi, Y [1 ]
Choi, SM [1 ]
Awaji, H [1 ]
机构：
[1] Nagoya Inst Technol, Showa Ku, Nagoya, Aichi 4668555, Japan
来源：
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN | 2005年 / 113卷 / 1313期
关键词：
nanocomposites; alumina; nickel; fracture toughness; soaking method; toughening mechanism;
D O I：
10.2109/jcersj.113.123
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Highly toughened nickel dispersed alumina-based nanocomposites were fabricated using our developed soaking method, based on our previously proposed toughening mechanism of nanocomposites. Commercially available gamma-alumina agglomerate with high porosity was used as a starting material. Nickel nitrate solution was penetrated into the nano-pores of the gamma-alumina agglomerate using this new technique. The alumina-nickel composite powder with alpha-alumina seeds was then sintered using a pulse electric current sintering technique. To disperse dislocations generated around the nano-particles into alumina grains, the sintered materials were annealed. The results showed that the maximum fracture toughness was 7.6 MPam(1/2), which was about two times higher than that of dense alumina.
引用
收藏
页码：123 / 125
页数：3
相关论文
共 50 条
  • [41] Fabrication and mechanical properties of fine-tungsten-dispersed alumina-based composites
    Tohru Sekino
    Koichi Niihara
    Journal of Materials Science, 1997, 32 : 3943 - 3949
  • [42] Fabrication and characterization of alumina and zirconia-toughened alumina porous structures
    Vemoori, Raju
    Bejugama, Shiva
    Khanra, Asit Kumar
    CERAMICS INTERNATIONAL, 2023, 49 (13) : 21708 - 21715
  • [43] Single-wall carbon nanotubes as attractive toughening agents in alumina-based nanocomposites
    Guo-Dong Zhan
    Joshua D. Kuntz
    Julin Wan
    Amiya K. Mukherjee
    Nature Materials, 2003, 2 : 38 - 42
  • [44] Response to comment on "Effect of sintering temperature on single-wall carbon nanotube toughened alumina-based nanocomposite"
    Jiang, Dongtao
    Mukherjee, Amiya K.
    SCRIPTA MATERIALIA, 2008, 58 (11) : 991 - 993
  • [45] Paramagnetic defects in alumina nanopowders and alumina-based ceramics
    Kijko, V.S.
    Zabolotskaya, E.V.
    Zolotukhina, L.V.
    Frolov, N.M.
    Dmitriev, I.A.
    Makurin, Yu.N.
    Steklo i Keramika, 2001, (03): : 33 - 36
  • [46] Properties of alumina-based ceramic cores
    Xiao-fu Liu
    Xin-li Guo
    Guo-yan Shui
    Chang-chun Li
    Gui-qiao Su
    Xun Sun
    Yang Guan
    Lei Jin
    ChinaFoundry, 2021, 18 (06) : 593 - 598
  • [47] Comment on "Effect of sintering temperature on a single-wall carbon nanotube-toughened alumina-based composite"
    Padture, Nitin P.
    Curtin, William A.
    SCRIPTA MATERIALIA, 2008, 58 (11) : 989 - 990
  • [48] Alumina-based ceramics for cutting application
    Kubíková, B
    Cibulková, J
    SOLID STATE CHEMISTRY V, 2003, 90-91 : 63 - 68
  • [49] Recent articles on alumina-based catalysts
    Applied Catalysis A:General, 2000, 193 (01)
  • [50] Dynamic fatigue of alumina-based ceramics
    Mezhotraslevoj NITs Tekhnicheskoj, Keramiki RAN
    Tyazh Mashinostr, 10 (2-4):
12345