Analysis of the process of obsessing the turning of the vessel

被引:0
|
作者
Vas'kov, Anatoliy S. [1 ]
Shtanko, Aleksandr N. [1 ,2 ]
Eskova, Anna, V [1 ]
机构
[1] Admiral Ushakov State Maritime Univ, Dept Nav, Lenins Ave 93, Novorossiysk 353918, Russia
[2] Vladimirskaya St 55V2, Anapa 353440, Russia
来源
MARINE INTELLECTUAL TECHNOLOGIES | 2022年 / 03期
关键词
Turning point; angular velocity; maneuvering; program control; approximation;
D O I
10.37220/MIT.2022.57.3.009
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
When maneuvering a vessel, there are no methods for determining the beginning of the obsession of turning in manual and automatic modes. Based on experimental maneuvers, a method is proposed for finding the point of obsession of the rotation of the steady circulation of the vessel, based on the division of the elements of rotation into periods with their subsequent approximation by various functions. The quality of the approximation is evaluated, the effectiveness of the selected functions is proved. To perform the calculations, records of the motion data of the simulation model obtained using a navigation simulator were used. A series of experiments included time series of measurements with subsequent smoothing by the method based on the Gauss function, during the circulation of a vessel with different rudder masonry. The use of the proposed method is possible both for tabular circulation accounting and for the formation of a command signal of automatic ship control systems.
引用
收藏
页码:71 / 76
页数:6
相关论文
共 50 条
  • [21] Performance analysis of wire electrochemical turning process—RSM approach
    Taha Ali El-Taweel
    S. A. Gouda
    The International Journal of Advanced Manufacturing Technology, 2011, 53 : 181 - 190
  • [22] Performance Analysis of Turning Process via Particle Swarm Optimization
    Deep, Kusum
    Bansal, Jagdish Chand
    NATURE INSPIRED COOPERATIVE STRATEGIES FOR OPTIMIZATION (NICSO 2007), 2008, 129 : 453 - 460
  • [23] Cutting mechanics analysis in turning process to optimise product sustainability
    Wakjira, Melesse Workneh
    Altenbach, Holm
    Ramulu, Perumalla Janaki
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2021, 7 (03) : 446 - 462
  • [24] Stability analysis of turning process with tailstock-supported workpiece
    M. Sekar
    J. Srinivas
    K. Rama Kotaiah
    S. H. Yang
    The International Journal of Advanced Manufacturing Technology, 2009, 43 : 862 - 871
  • [25] Workpiece dynamic analysis and prediction during chatter of turning process
    Cardi, Adam A.
    Firpi, Hiram A.
    Bement, Matthew T.
    Liang, Steven Y.
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2008, 22 (06) : 1481 - 1494
  • [26] A stability analysis of turning process considering the workpiece as a Timoshenko beam
    Li, He
    Song, Guangying
    Hou, Junfeng
    Li, Shuo
    Wen, Bangchun
    JOURNAL OF VIBROENGINEERING, 2013, 15 (04) : 1927 - 1939
  • [27] Nonlinear analysis of chatter in turning process using dimensionless groups
    Hojjatollah Tavari
    Mohammad Mahdi Jalili
    Mohammad Reza Movahhedy
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2015, 37 : 1151 - 1162
  • [28] Nonlinear analysis of experimental time series of a straight turning process
    Litak, G
    Rusinek, R
    Teter, A
    MECCANICA, 2004, 39 (02) : 105 - 112
  • [29] NONLINEAR OSCILLATION AND STABILITY ANALYSIS OF THE TURNING PROCESS WITH A WORN TOOL
    Moradi, Hamed
    Ahmadian, Mohammad T.
    Bakhtiari-Nejad, Firooz
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 1, PT B, 2010, : 927 - 934
  • [30] Analysis on dynamics of a cutting tool with the thermal distortion in turning process
    An Wang
    Wuyin Jin
    Guanping Wang
    Xiaoyong Li
    Nonlinear Dynamics, 2016, 86 : 1183 - 1191