Fabrication of porous ceramics with unidirectionally aligned continuous pores

被引：0
|
作者：
Zhang, GJ [1 ]
Yang, JF [1 ]
Ohji, T [1 ]
机构：
[1] Natl Inst Adv Ind Sci & Technol AIST, Synergy Mat Res Ctr, Nagoya, Aichi 4638687, Japan
来源：
JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 2001年 / 84卷 / 06期
关键词：
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Porous alumina ceramics with unidirectionally aligned continuous pores were fabricated via the slurry coating of fugitive fiber. Cotton thread was coated with ceramic slurry by pulling it through the slurry, and specimens were produced by spooling the coated thread. The obtained porous alumina ceramics had an average pore diameter of 165 mum, 35% open porosity, and a bending strength of 160 MPa, It was suggested that the pore size and the porosity could be adjusted using the diameter of the cotton thread and the solids concentration of the slurry respectively.
引用
收藏
页码：1395 / 1397
页数：3
相关论文
共 50 条
  • [41] Fabrication of porous aluminum alloys with aligned unidirectional pores by dipping pipes into liquid and semi-solid base metals
    Hayashida, Tatsuro
    Suzuki, Shinsuke
    Ichikawa, Junichi
    Toyoyama, Ryuji
    8TH INTERNATIONAL CONFERENCE ON POROUS METALS AND METALLIC FOAMS, 2014, 4 : 85 - 89
  • [42] CHARACTERIZATION OF PORES IN PORCELAIN BONDED POROUS ALUMINA CERAMICS
    ROY, SK
    AMERICAN CERAMIC SOCIETY BULLETIN, 1967, 46 (04): : 467 - &
  • [43] High-surface-area alumina ceramics with aligned macroscopic pores
    Fukasawa, T
    Deng, ZY
    Ando, M
    Ohji, T
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2001, 109 (12) : 1035 - 1038
  • [44] Fabrication and mechanical properties of silicon nitride ceramics with unidirectionally oriented rodlike grains
    Teshima, H
    Hirao, K
    Toriyama, M
    Kanzaki, S
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1999, 107 (12) : 1216 - 1220
  • [45] Production of porous Calcium Phosphate (CaP) ceramics with aligned pores using ceramic/camphene-based co-extrusion
    Choi W.-Y.
    Kim H.-E.
    Moon Y.-W.
    Shin K.-H.
    Koh Y.-H.
    Biomaterials Research, 19 (1)
  • [46] A novel method for fabrication of alumina foams with ellipsoidal aligned oriented pores
    Zahed, Mojgan
    Afarani, Mahdi Shafiee
    Mohebbi-Kalhori, Davod
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2015, 120 (01): : 215 - 220
  • [47] Fabrication of Porous Titanium with Directional Pores for Biomedical Applications
    Lee, Ji-Woon
    Lee, Ji-Sun
    Kim, Myoung-Gyun
    Hyun, Soong-Keun
    MATERIALS TRANSACTIONS, 2013, 54 (02) : 137 - 142
  • [48] A novel method for fabrication of alumina foams with ellipsoidal aligned oriented pores
    Mojgan Zahed
    Mahdi Shafiee Afarani
    Davod Mohebbi-Kalhori
    Applied Physics A, 2015, 120 : 215 - 220
  • [49] Fabrication, properties, and applications of porous metals with directional pores
    Nakajima, Hideo
    PROCEEDINGS OF THE JAPAN ACADEMY SERIES B-PHYSICAL AND BIOLOGICAL SCIENCES, 2010, 86 (09): : 884 - 899
  • [50] Fabrication and properties of porous materials with directional elongated pores
    Nakajima, H
    Hyun, SK
    Tane, M
    Nakahata, T
    ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, 2006, 512 : 295 - 300
12345