Fabrication of porous ceramics with unidirectionally aligned continuous pores

被引：0
|
作者：
Zhang, GJ [1 ]
Yang, JF [1 ]
Ohji, T [1 ]
机构：
[1] Natl Inst Adv Ind Sci & Technol AIST, Synergy Mat Res Ctr, Nagoya, Aichi 4638687, Japan
来源：
JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 2001年 / 84卷 / 06期
关键词：
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Porous alumina ceramics with unidirectionally aligned continuous pores were fabricated via the slurry coating of fugitive fiber. Cotton thread was coated with ceramic slurry by pulling it through the slurry, and specimens were produced by spooling the coated thread. The obtained porous alumina ceramics had an average pore diameter of 165 mum, 35% open porosity, and a bending strength of 160 MPa, It was suggested that the pore size and the porosity could be adjusted using the diameter of the cotton thread and the solids concentration of the slurry respectively.
引用
收藏
页码：1395 / 1397
页数：3
相关论文
共 50 条
  • [1] Filtering properties of porous ceramics with unidirectionally aligned pores
    Fukasawa, T
    Ando, M
    Ohji, T
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2002, 110 (07) : 627 - 631
  • [2] Gas permeability and mechanical properties of porous alumina ceramics with unidirectionally aligned pores
    Isobe, Toshihiro
    Kameshima, Yoshikazu
    Nakajima, Akira
    Okada, Kiyoshi
    Hotta, Yuji
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2007, 27 (01) : 53 - 59
  • [3] Fabrication of Porous Metals with Unidirectionally Aligned Pores by Rod-Dipping Process
    Muto, Daiki
    Yoshida, Tomonori
    Tamai, Tomoya
    Sawada, Mahiro
    Suzuki, Shinsuke
    MATERIALS TRANSACTIONS, 2019, 60 (04) : 544 - 553
  • [4] Porous ceramics with fine uni-directionally-aligned continuous pores
    Zhang, GJ
    Yang, JF
    Ohji, T
    25TH ANNUAL CONFERENCE ON COMPOSITES, ADVANCED CERAMICS, MATERIALS, AND STRUCTURES: B, 2001, 22 (04): : 183 - 190
  • [5] A novel route for the fabrication of porous Si3N4 ceramics with unidirectionally aligned channels
    Zhang, Ye
    Yao, Dongxu
    Zuo, Kaihui
    Xia, Yongfeng
    Yin, Jinwei
    Liang, Hanqin
    Zeng, Yu-Ping
    MATERIALS LETTERS, 2020, 276
  • [6] In situ synthesis of hierarchically porous silica ceramics with unidirectionally aligned channel structure
    Han, Jiecai
    Hu, Luyang
    Zhang, Yumin
    Jiang, Zehui
    Zhou, Yufeng
    SCRIPTA MATERIALIA, 2010, 62 (06) : 431 - 434
  • [7] Porous ceramics mimicking nature-preparation and properties of microstructures with unidirectionally oriented pores
    Okada, Kiyoshi
    Isobe, Toshihiro
    Katsumata, Ken-ichi
    Kameshima, Yoshikazu
    Nakajima, Akira
    MacKenzie, Kenneth J. D.
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2011, 12 (06)
  • [8] FABRICATION OF POROUS CERAMICS WITH CYLINDRICAL PORES AND INCORPORATING PORES BY UNIDIRECTIONAL SOLIDIFICATION PROCESS
    Ueno, Shunkichi
    Lee, Jun-Woo
    CERAMICS FOR ENVIRONMENTAL SYSTEMS, 2016, 257 : 129 - 136
  • [9] Preparation of porous Si3N4 ceramics with unidirectionally aligned channels
    Ma, Ning
    Du, Linjing
    Liu, Wenting
    Zhang, Xiaoyan
    Huo, Wenlong
    Qu, Yanan
    Gan, Ke
    Wang, Yali
    Yang, Jinlong
    CERAMICS INTERNATIONAL, 2016, 42 (07) : 9145 - 9151
  • [10] Microstructure and gas permeation performance of porous silicon nitride ceramics with unidirectionally aligned channels
    Li, Xueqing
    Yao, Dongxu
    Zuo, Kaihui
    Xia, Yongfeng
    Yin, Jinwei
    Liang, Hanqin
    Zeng, Yu-Ping
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2020, 103 (11) : 6565 - 6574
12345