Analysis of forced response of high-mode vibrations of mistuned bladed discs using reduced-order modelling methodology

被引：0

作者：

Duan, Y. ^{[1
]}

Zang, C. ^{[1
]}

Petrov, E. P. ^{[2
]}

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Jiangsu Prov Lab Aerosp Power Syst, Coll Energy & Power Engn, Nanjing 210016, Jiangsu, Peoples R China

[2] Univ Sussex, Sch Engn & Informat, Brighton BN1 9QT, E Sussex, England

来源：

PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2014) AND INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2014) | 2014年

关键词：

LOCALIZATION; DISKS;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, the forced response of mistuned bladed disc is studied when excitation frequencies are high and high families of modes are excited. A model reduction technique is developed for the computationally efficient analysis of high-frequency forced response for bladed discs using high-fidelity finite element models. The finite element model of a sector of a tuned bladed disc is used to provide primary information about modal properties, which are used in the analysis of mistuning structures. The blade mistuning is modelled by specially defined mistuning matrices used for simulating experimentally measured scatter of blade natural frequencies. The effects of mistuning on high-mode forced response of bladed disc are discussed.

引用

页码：2551 / 2563

页数：13

共 44 条

[31] Passive Vibration Reduction Analysis of the Mistuned Blisk Deposited Hard Coating Using Modified Reduced-Order Model
Gao, Feng
Li, Bingqiang
Liu, Xiuting
COATINGS, 2019, 9 (12)
[32] Nonlinear forced response analysis of bladed disks using a relative cyclic component mode synthesis approach
Mehrdad Pourkiaee, S.
Zucca, Stefano
Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019, 2019,
[33] Nonlinear reduced-order modeling of the forced and autonomous aeroelastic response of a membrane wing using Harmonic Balance methods
Nardini, Massimiliano
Illingworth, Simon J.
Sandberg, Richard D.
JOURNAL OF FLUIDS AND STRUCTURES, 2019, 91
[34] Uncertainty analysis of inelastic response of high-rise buildings to wind using a reduced-order building model
Huang, Jinghui
Chen, Xinzhong
ENGINEERING STRUCTURES, 2023, 288
[35] Feature extraction and reduced-order modelling of nitrogen plasma models using principal component analysis
Bellemans, Aurelie
Aversano, Gianmarco
Coussement, Axel
Parente, Alessandro
COMPUTERS & CHEMICAL ENGINEERING, 2018, 115 : 504 - 514
[36] Reduced-Order Synchronous Generator Modelling for Real-Time Simulation using Shifted Frequency Analysis
Dinkelbach, Jan
Moraga, Martin
Monti, Antonello
2023 OPEN SOURCE MODELLING AND SIMULATION OF ENERGY SYSTEMS, OSMSES, 2023,
[37] Modelling and analysis of deep drawing with utilisation of vibrations and servo press using response surface methodology
Chu, T. -H.
Fuh, K. -H.
Yeh, W. -C.
MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 936 - 939
[38] Evaluation of linear, inviscid, viscous, and reduced-order modelling aeroelastic solutions of the AGARD 445.6 wing using root locus analysis
Silva, Walter A.
Chwalowski, Pawel
Perry, Boyd, III
INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS, 2014, 28 (3-4) : 122 - 139
[39] A New Reduced Order Modeling for Stability and Forced Response Analysis of Aero-Coupled Blades Considering Various Mode Families
Mayorca, Maria A.
Vogt, Damian M.
Fransson, Torsten H.
Martensson, Hans
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2012, 134 (05):
[40] Fractional-order IMC controller for high-order system using reduced-order modelling via Big-Bang, Big-Crunch optimisation
Saxena, Sahaj
Biradar, Shivanagouda
INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE, 2022, 53 (01) : 168 - 181

← 1 2 3 4 5 →