Calcium phosphate coatings grown at different substrate temperatures by pulsed ArF-laser deposition

被引：54

作者：

Mayor, B ^{[1
]}

Arias, J ^{[1
]}

Chiussi, S ^{[1
]}

Garcia, F ^{[1
]}

Pou, J ^{[1
]}

Fong, BL ^{[1
]}

Perez-Amor, M ^{[1
]}

机构：

[1] Univ Vigo, Dept Fis Aplicada, Vigo 36280, Spain

来源：

THIN SOLID FILMS | 1998年 / 317卷 / 1-2期

关键词：

calcium phosphate coatings; pulsed ArF-laser deposition; hydroxylapatite;

D O I：

10.1016/S0040-6090(97)00625-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Due to their similarity with the mineral part of bone, calcium phosphate coatings, specially hydroxylapatite, are commonly used to enhance the osteointegration of orthopaedical and dental titanium implants. To obtain more homogeneous and adherent coatings than the commercial ones produced by plasma spraying, pulsed ArF-laser deposition has been investigated. With this technique, hydroxylapatite sintered pellets have been ablated in water atmosphere at different substrate temperatures to produce calcium phosphate coatings. The characterization of the obtained films by profilometry, ellipsometry, Fourier Transformed Infrared Spectroscopy, XRD and SEM with EDX shows a strong dependence in the amount of apatite structure on the substrate temperature used during the deposition process. (C) 1998 Elsevier Science S.A.

引用

页码：363 / 366

页数：4

共 50 条

[21] Calcium phosphate coatings deposited by laser ablation at 355 nm under different substrate temperatures and water vapour pressures
Fernández-Pradas, J.M.
Clèries, L.
Martínez, E.
Sardin, G.
Esteve, J.
Morenza, J.L.
Applied Physics A: Materials Science and Processing, 2000, 71 (01): : 37 - 42
[22] Pulsed electrochemical deposition of calcium phosphate coatings for biomedical applications
Lissandrello, F.
Magagnin, L.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2023, 101 (04): : 173 - 178
[23] Micro- and nano-testing of calcium phosphate coatings produced by pulsed laser deposition
Arias, JL
Mayor, MB
Pou, J
Leng, Y
León, B
Pérez-Amor, M
BIOMATERIALS, 2003, 24 (20) : 3403 - 3408
[24] Hydroxyapatite coatings deposited on titanium substrate by pulsed laser deposition
Liu, Fu
Song, Ying
Wang, Fuping
Igarashi, Kaoru
Shimizu, Tadao
High-Performance Ceramics IV, Pts 1-3, 2007, 336-338 : 1670 - 1672
[25] Study on the preparation of calcium phosphate coatings on Ti substrate by electrochemical deposition under different conditions
State Key Laboratory for Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, China
不详
Gongneng Cailiao, 2008, 3 (473-475): : 473 - 475
[26] Microstructures and properties of titanium nitride films prepared by pulsed laser deposition at different substrate temperatures
Guo, Hongjian
Chen, Wenyuan
Shan, Yu
Wang, Wenzhen
Zhang, Zhenyu
Jia, Junhong
APPLIED SURFACE SCIENCE, 2015, 357 : 473 - 478
[27] Properties study of ZnS thin films fabricated at different substrate temperatures by Pulsed Laser Deposition
Ming, Zhenxun
Ding, Chao
Li, Bing
Zhang, Jingquan
Li, Wei
Wu, Lili
Feng, Lianghuan
Feng, Judy
ADVANCES IN TEXTILE ENGINEERING AND MATERIALS III, PTS 1 AND 2, 2013, 821-822 : 835 - +
[28] Optical properties of SiOx nanostructured films by pulsed-laser deposition at different substrate temperatures
Chen, XY
Lu, YF
Wu, YH
Cho, BJ
Song, WD
Dai, DY
JOURNAL OF APPLIED PHYSICS, 2004, 96 (06) : 3180 - 3186
[29] Current Status on Pulsed Laser Deposition of Coatings from Animal-Origin Calcium Phosphate Sources
Duta, Liviu
Popescu, Andrei C.
COATINGS, 2019, 9 (05)
[30] Calcium phosphate thin film processing by pulsed laser deposition and in situ assisted ultraviolet pulsed laser deposition
V. Nelea
H. Pelletier
M. Iliescu
J. Werckmann
V. Craciun
I. N. Mihailescu
C. Ristoscu
C. Ghica
Journal of Materials Science: Materials in Medicine, 2002, 13 : 1167 - 1173

← 1 2 3 4 5 →